Configuring the Output Paper Size on a Chapter Basis

If 1-sided printing is configured for the entire document but the following print settings and paper settings are not configured, you can configure the different output paper size only for the specified chapter.

Stapling

Hole Punching

Cover/Back Cover/Tab Paper/Sheets

NOTE
For more information on how to configure the output paper size for the entire document, see the following. Setting the Output Paper Size For more information on how to configure 1-sided or 2-sided print settings for the entire document, see the following. Configuring 1-Sided/2-Sided Printing For more information on how to cancel the settings on a chapter basis, see the following. Canceling Print Settings Specified on a Chapter Basis

NOTE

For more information on how to configure the output paper size for the entire document, see the following.

Setting the Output Paper Size

For more information on how to configure 1-sided or 2-sided print settings for the entire document, see the following.

Configuring 1-Sided/2-Sided Printing

For more information on how to cancel the settings on a chapter basis, see the following.

Canceling Print Settings Specified on a Chapter Basis

Select the chapter to specify the output size settings for on the [Page Tree] tab on the Navigation Window.

NOTE
If the [Page Tree] tab on the Navigation Window is not displayed, see the following. Displaying/Hiding the Navigation Window

Click the icon for the ribbon command.

Or, follow one of the steps described below.

Select [Chapter Settings] on the ribbon > [Chapter Settings]

Click [Chapter Settings] on the ribbon

Right-click and select [Chapter Settings]

[Chapter Settings] is displayed.

NOTE
If commands are not displayed on the ribbon of Desktop Editor, see the following to display them. Adding Commands to Ribbons This operation can also be performed with the tool buttons. If tool buttons are not displayed on the toolbar of Desktop Editor, see the following to display them. Setting Tool Buttons on the Toolbar Lists of Ribbon Commands/Tool Buttons

Select the [Specify output paper for selected chapter] check box on the [Layout Settings] tab.

Select the output paper size from the [Output Size] pull-down list.

NOTE
Click [Apply] to check the document preview in the Work Window without closing [Chapter Settings].

Click [OK].

The chapter icon displayed on the [Page Tree] tab on the Navigation Window changes and the chapter name changes to blue.

NOTE
The status bar shows the specified output paper size for the entire document. The items that can be selected for the output paper size vary according to the type of printer selected in [Printer]. When the output paper size is set to [Auto (Size)] for the entire document or each chapter and the [Specify page layout for selected chapter] check box is not selected, if you set the page layout to a value other than [1 on 1] for the entire document, the output paper size set for the chapter is disabled. If you set the output paper size to something other than [Auto (Size)] for a document including different page orientations or sizes, pages of which the orientation/size is different from the orientation/size of the current paper are automatically enlarged or reduced to fit the paper width (they are not automatically rotated). When [Auto (Size)] is selected as the output paper size setting, the operation that is performed differs according to the [Select Paper Size] setting. [File] menu > [Option] > [System Settings] > [Common Settings] > [Print/Fax] > [Select Paper Size] When using Custom Paper Type, it must be registered in the printer selected in [Printer] in advance. You can temporarily register a custom paper size depending on the printer you are using. In this case, if the paper size corresponding with the original size is not registered in the printer, you can temporarily register a custom paper size and print the document using the registered custom paper size, even when this check box is not selected.

NOTE

The status bar shows the specified output paper size for the entire document.

The items that can be selected for the output paper size vary according to the type of printer selected in [Printer].

When the output paper size is set to [Auto (Size)] for the entire document or each chapter and the [Specify page layout for selected chapter] check box is not selected, if you set the page layout to a value other than [1 on 1] for the entire document, the output paper size set for the chapter is disabled.

If you set the output paper size to something other than [Auto (Size)] for a document including different page orientations or sizes, pages of which the orientation/size is different from the orientation/size of the current paper are automatically enlarged or reduced to fit the paper width (they are not automatically rotated).

When [Auto (Size)] is selected as the output paper size setting, the operation that is performed differs according to the [Select Paper Size] setting.

[File] menu > [Option] > [System Settings] > [Common Settings] > [Print/Fax] > [Select Paper Size]

When using Custom Paper Type, it must be registered in the printer selected in [Printer] in advance. You can temporarily register a custom paper size depending on the printer you are using. In this case, if the paper size corresponding with the original size is not registered in the printer, you can temporarily register a custom paper size and print the document using the registered custom paper size, even when this check box is not selected.