Configuring the Header/Footer on a Chapter Basis

You can specify the header/footer settings by chapter.

Configure the header/footer to be inserted into a document on a chapter basis.

NOTE
For information on specifying header/footer settings, see the following. Adding a Header/Footer to a Document Changing/Canceling the Header/Footer Settings

Click [Detailed Settings for Header/Footer] in [Header/Footer Settings] on the [Page Settings] tab on the Details Window.

Or, follow one of the steps described below.

Select [Detailed Settings] from each [Header]/[Footer] pull-down list

Click [Print Page Header/Footer Details] on the ribbon

Click [Original Page Header/Footer Details] on the ribbon

Select [Detailed Settings] from the pull-down list of each [Header]/[Footer] in the [Print Pages]/[Original Pages] groups on the ribbon

[Detailed Settings for Headers/Footers (Print Pages)] is displayed.

NOTE
The operation procedure is the same for [Insert Header/Footer into Print Pages] and [Insert Header/Footer into Original Pages]. When specifying detailed footer settings, detailed footer settings are displayed. The settings are the same as those for the header. If commands are not displayed on the ribbon of Desktop Editor, see the following to display them. Adding Commands to Ribbons This operation can also be performed with the tool buttons on the toolbar. If tool buttons are not displayed on the toolbar of Desktop Editor, see the following to display them. Setting Tool Buttons on the Toolbar Lists of Ribbon Commands/Tool Buttons

NOTE

The operation procedure is the same for [Insert Header/Footer into Print Pages] and [Insert Header/Footer into Original Pages].

When specifying detailed footer settings, detailed footer settings are displayed. The settings are the same as those for the header.

If commands are not displayed on the ribbon of Desktop Editor, see the following to display them.

Adding Commands to Ribbons

This operation can also be performed with the tool buttons on the toolbar. If tool buttons are not displayed on the toolbar of Desktop Editor, see the following to display them.

Setting Tool Buttons on the Toolbar

Lists of Ribbon Commands/Tool Buttons

Select [Header Setting Method] > [Insert headers by chapter].

Click [Add].

[Header Settings by Chapter] is displayed.

Enter a chapter number in [Start Chapter] and [End Chapter].

Click [OK].

[Detailed Settings for Headers/Footers (Print Pages)] is displayed again.

If you want to set the header/footer for other chapters, repeat step 4.

NOTE
The following item cannot be selected when setting the header/footer by chapter. [First page of document] Click [Apply] to check the document preview in the Work Window without closing [Detailed Settings for Headers/Footers (Print Pages)].

Click [OK].