<Fax Settings>

All the settings about the fax are listed with short descriptions. Default settings are marked with a dagger ().
<Basic Settings>
<TX Function Settings>
<RX Function Settings>
<RX Print Settings>
<Forwarding Settings>
<Fax Setup Guide>
Asterisks (*)
Settings marked with "*1" may not be displayed depending on the model you are using.
Settings marked with "*2" may be unavailable or vary or have different defaults depending on your country or region.

<Basic Settings>

Specify the basic settings for using the machine as a fax device.
<Register Unit Telephone Number>
Register the fax number for the machine. Registering the Fax Number and Unit Name
<Select Line Type> 
Select the telephone line type used for fax transmission. Connecting the Telephone Line
<Pulse>
<Tone>
<Public Line Connection>
When the fax receive mode is <Fax/Tel (Auto Switch)>, an external telephone may not ring or a call may not be dialable. In this instance, specify <Adapter 1> or <Adapter 2>.
<Direct>
<Adapter 1>
<Adapter 2>
<Off-Hook Alarm>
Select whether the machine makes an alert sound when the handset of a telephone connected to the machine is not properly set on the cradle. You can also adjust the volume of the alert sound.
6 Levels
<Communication Management Settings>
Adjust the communication start speed in descending order from "33600 bps." This adjustment should be made when it takes a long time to start sending or receiving a fax due to a poor telephone line connection.
<TX Start Speed>
<33600 bps>
<14400 bps>
<9600 bps>
<7200 bps>
<4800 bps>
<2400 bps>
 
<RX Start Speed>
<33600 bps>
<14400 bps>
<9600 bps>
<7200 bps>
<4800 bps>
<2400 bps>
<Auto Adjust VoIP Comm. Speed>
Specify whether to reduce communication errors on a poor-quality line that experiences much packet loss.
<Off>
<On>
Setting <Auto Adjust VoIP Comm. Speed> to <On> causes the initial transmitting speed when sending or receiving a fax to be slower.

<TX Function Settings>

Specify settings for sending faxes.
<Change Default Settings>
You can change the default settings used for sending faxes. The selected settings are used as the default settings when scanning originals. Changing the Default Settings for Functions
<Resolution>
<200 x 100 dpi (Normal)>
<200 x 200 dpi (Fine)>
<200 x 200 dpi (Photo)>
<200 x 400 dpi (Superfine)>
 
<Density>
9 Levels
 
<2-Sided Original> *1
<Off>
<Book Type>
<Calendar Type>
 
<Sharpness>
7 Levels
<Register Unit Name>
Register the name of a company or person. Registering the Fax Number and Unit Name
The registered name is sent as sender information to the destination. <TX Terminal ID>
<ECM TX>
Enable or disable error correction mode (ECM). ECM checks for fax data errors and corrects them. To reduce errors on received faxes, see <ECM RX>.
<Off>
<On>
ECM must be enabled on both the machine and the other fax device because error checks are performed on both the sending and receiving devices.
Even when ECM is enabled, errors may occur due to telephone line conditions.
It may take a longer time than usual to process data when ECM is enabled because the error checks and corrections are performed while the data is transmitted.
<Set Pause Time>
For example, when you make calls by dialing "0 - (pause) - (telephone number)", 0 is dialed first and then a few seconds later, the telephone number. When sending faxes overseas, you need to specify destinations by dialing "(international access code) - (country code) - (area code) - (fax number)" but consecutive numbers that are input without pauses may not be recognized correctly. In this case, try adding a pause after the international access code or the fax number. If the code or the number is still not recognized correctly, change the duration of the pause. For instructions on how to enter a pause, see step 4 on Basic Operations for Sending Faxes.
1 to 2 to 15 (sec.)
<Auto Redial>
Specify settings for Auto Redial, a function that automatically redials the fax number after several minutes if the first attempt fails because the line is busy. You can specify how many times the machine redials and the interval between redials.
<Off>
 
<On>
<Number of Times to Redial>
1 to 2 to 10 (times)
<Redial Interval>
2 to 99 (min.)
<Redial When Error Occurs>
<Off>
<On>
<TX Terminal ID>
Specify settings for adding the sender information, including the fax number and the name of the machine, to the fax header. The recipient can check who sent the fax by looking at the added information.
<Off>
 
<On>
<Print Position>
<Inside Image Area>
<Outside Image Area>
<Mark Number as>
<FAX>
<TEL>
<Check Dial Tone Before Sending> *2
Select whether to check the dial tone before a fax number is dialed.
<Off>
<On>
<Allow Fax Driver TX>
Enable or disable PC faxing (sending faxes from a computer). Restricting Fax Sending from a Computer
<Off>
<On>
<Confirm Entered Fax Number>
Select whether to require users to enter the fax number twice when it is entered by using the numeric keys. Confirming the Entered Fax Number
<Off>
<On>
<Restrict Sequential Broadcast>
Select whether to prohibit sequential broadcasting, a feature that sends faxes to multiple destinations in succession. Restricting Sequential Broadcasts
<Off>
<Confirm Sequential Broadcast>
<Reject Sequential Broadcast>
<Initialize Default Settings>
Select this option to restore the default fax transmission settings.

<RX Function Settings>

Specify settings for receiving faxes.
<ECM RX>
Enable or disable error correction mode (ECM). ECM checks for fax data errors and corrects them. To reduce errors on sent faxes, see <ECM TX>.
<Off>
<On>
ECM must be enabled on both the machine and the other fax device because error check is performed on both the sending and receiving devices.
Even when ECM is enabled, errors may occur due to telephone line conditions.
It may take a longer time than usual to process data when ECM is enabled because the error check and corrections are performed while the data is transmitted.
<Incoming Ring>
Specify settings for sounding a ring to notify you of incoming faxes. This feature is only available when <Auto> or <Fax/Tel (Auto Switch)> is selected for the receive mode. Specify how many times the incoming call rings when the machine receives a fax call. You can also disable the settings to prevent the incoming call from ringing.
<Off>
 
<On>
1 to 2 to 99 (times)
When <On> is specified, you need to connect your telephone to the machine beforehand.
When <Off> is specified, the machine does not enter sleep mode.
<Remote RX>
Specify settings for receiving a fax by operating a telephone that is connected to the machine (Remote Reception). When a fax is sent to the machine, you can receive it just by picking up the handset of the telephone and entering a specific ID number by using the telephone. This feature can save you the trouble of going all the way to the machine. For instructions on how to use Remote Reception, see Using a Telephone to Receive Faxes (Remote Reception).
<Off>
 
<On>
00 to 25 to 99
<Switch to Auto RX>
Specify settings for automatically receiving a fax after the machine has rung for a specified time period. This feature is only available when <Manual> is selected for the receive mode. By using this feature, faxes can be received even when no one is available to pick up the handset.
<Off>
 
<On>
1 to 15 to 99 (sec.)
<Memory Lock Settings>
Select whether to store received faxes without immediately printing them. Stored fax documents can be printed at any time by changing the setting to <Off>. Saving Received Documents into the Machine (Memory Reception)
<Off>
 
<On>
<Report Print>
<Off>
<On>
<Memory Lock Time>
<Off>
<On>
<Memory Lock Start Time>
<Memory Lock End Time>

<RX Print Settings>

Specify settings for printing received faxes.
<Print on Both Sides>
Specify settings for printing received faxes on both sides of paper.
<Off>
<On>
<Reduce RX Size>
Specify settings for reducing the image size of a received document. You can select an automatic reduction ratio that reduces the received document to size of the loaded paper. You can also select a ratio from a list.
<Off>
 
<On>
<Ratio>
<Auto>
<97%>
<95%>
<90%>
<75%>
<Direction>
<Vertical/Horizontal>
<Vertical Only>
<RX Page Footer>
Select whether to print information, including date and time of reception and page numbers, on the bottom of received faxes.
<Off>
<On>
<Continue Print. When Near Cart. Life End>
If receiving faxes when the amount remaining in a toner cartridge is nearly empty, the machine holds them in memory instead of printing. However, if this function is enabled, the machine continues printing.
<Off>
<On>
When this function is enabled, faxes may fade or blur. Because received documents are not stored in memory, you need to ask the sender to resend the document.

<Forwarding Settings>

Specify settings for forwarding faxes.
<Enable Forwarding Settings>
Select whether to forward all the received fax documents to a specified destination. You can specify an e-mail address or a shared folder in a computer as the forwarding destination. Forwarding the Received Documents Automatically
<Off>
<On>
<Print Images>
Select whether to print forwarded fax documents. You can set the machine to print forwarded documents only when an error occurs. Printing Documents to be Forwarded
<Off>
<On>
<Only When Error Occurs>
<Store Images in Memory>
Select whether to store fax documents in memory when they are not successfully forwarded. You can resend or print the documents later as necessary. Printing/Resending/Deleting Documents that Failed to be Forwarded
<Off>
<Only When Error Occurs>

<Fax Setup Guide>

Select to display on-screen instructions for specifying settings, including the fax number and the telephone line type. Configuring Initial Settings for Fax Functions
2KUU-07R