Overlay printing will not execute
Cannot perform overlay printing
Cause 1.
The resolution of the print data differs from that of the form file.
Remedy 1.
For the UFR II/LIPSLX/LIPS4/PCL6 driver, change the resolution according to the following procedure.
(1) Display the [Quality] sheet.
(2) Click [Advanced Settings] → select [Resolution].
(3) For [Resolution], set the same resolution as that of the form file.
Remedy 2.
For the PS3 driver, change the resolution according to the following procedure.
(1) Display the [Quality] sheet.
(2) For [Resolution], set the same resolution as that of the form file.
Cause 2.
[Black and White] has been specified for [Color Mode] and a form produced in color has been set.
Remedy
Change [Color Mode] in the [Basic Settings] sheet to [Color].
Cannot use previously stored overlay form
Cause
The overlay print settings are not configured correctly.
Remedy
Check the settings according to the following procedure.
(1) Display the [Page Setup] sheet.
(2) Click [Page Options].
(3) In the displayed dialog box, display the [Overlay] sheet.
(4) Confirm that [Processing Method] > [Use Overlay Printing] is selected.
Related Topics