[Page Setup] Sheet
You can set the page size, print orientation, layout options, etc.
Depending on the driver or device you are using, you may not be able to set some of the functions described herein.
[Page Size]
Displays the paper size of the print data prepared in the application.
[Output Size]
Specifies the actual paper size to be printed on. If you select a size that differs from [Page Size], the print data is enlarged or reduced to fit the set page size when printing.
For the LIPS4 driver, paper sizes up to 487.7 mm (19.20 inches) in height can be selected. To select a paper size that exceeds this height, use a different type of driver, such as the UFR II/LIPSLX/PS3 driver.
[Envelope Print Details] > [Print Envelope] Dialog Box
Follow the wizard to configure the settings required for printing on envelopes.
You can configure the following settings that are found on separate sheets.
[Output Size]/[Paper Source]/[Paper Type]/[Orientation]/[Rotate Print Data 180 Degrees]
[Copies]
Specifies the number of copies to be printed.
[Orientation]
Specifies the orientation of print data.
[Page Layout]
Specifies how many pages to print on each sheet of paper.
[Poster Details] > [Poster Details] Dialog Box
Enables you to set detailed settings when printing a poster.
The poster printing function enlarges the print data of one page and prints it over multiple sheets of paper. When the output sheets are joined together, they form a large print like a poster.
[Print Margin Borders]
Prints borders with other sheets as a guide to paste sheets together.
[Set Margins for Cutting/Pasting]
Sets margins for cutting or pasting. Select a width from [Margin Width]. When printing marks indicating the cutout or margin section(s), select [Print Marks for Alignment].
[Pages to Print]
Specifies the page(s) to print.
[Page Order]
Specifies the page order to print.
[Manual Scaling]
Specifies an enlargement or reduction ratio for printing.
[Use 1 on 1 for Single-Page Data]
When printing multiple pages on each sheet, prints single page data over one sheet.
[Watermark]
Superimposes and prints semi-transparent characters such as [TOP SECRET] or [DRAFT] over print data.
[Edit Watermark] > [Edit Watermark] Dialog Box
Enables you to create and add a new watermark.
[Watermark List]
Displays registered watermarks as a list. When selecting a watermark, a preview is displayed to the left.
[Add]
Adds a new watermark to [Watermark List] as [Untitled]. You can set the name of the watermark in [Name] and its settings in the [Attributes], [Alignment], and [Print Style] sheets.
[Delete]
Deletes the selected watermark.
[Name]
Displays the name of the watermark selected in [Watermark List]. When adding a new watermark, enter the name of the watermark.
[Attributes] Sheet
Specifies the settings relating to the text in a watermark.
[Alignment] Sheet
[Position] specifies the position of the watermark as coordinates relative to the center (0) of the document. [Tilt] sets the angle of the watermark.
[Print Style] Sheet
[Watermark Border] sets whether a frame is printed around the text. [Watermark Position] sets the overlap position with respect to the print data. When printing the watermark on only the first page, select [Print on First Page Only].
[Custom Paper Size] > [Custom Paper Size Settings] Dialog Box
Enables you to register a desired paper size and use it for printing.
Papers with a red dot (
) next to them are standard paper sizes and cannot be edited or deleted.
) next to them are standard paper sizes and cannot be edited or deleted.If [Use Some Custom Paper Sizes as Regional Paper Sizes] is enabled, the custom paper size selected in [Output Size] is handled as a regional paper size if it is the same size as a regional paper size.
A regional paper size enables you to use print functions that cannot be specified with regular custom paper.
The paper types and sizes handled as regional paper with this driver are indicated below.
Paper Name | Width x Height (Unit : mm) | Width x Height (Unit : inch) |
Oficio | 216.0 x 317.0 | 8.50 x 12.50 |
Oficio (Argentina) | 220.0 x 340.0 | 8.66 x 13.39 |
Oficio (Brazil) | 216.0 x 355.0 | 8.50 x 13.98 |
Oficio (Ecuador) | 220.0 x 320.0 | 8.66 x 12.60 |
Oficio (Mexico) | 216.0 x 341.0 | 8.50 x 13.43 |
Letter (Argentina) | 220.0 x 280.0 | 8.66 x 11.02 |
Letter (Government) | 203.0 x 267.0 | 8.00 x 10.50 |
Legal (Government) | 203.0 x 330.0 | 8.00 x 13.00 |
Legal (India) | 215.0 x 345.0 | 8.46 x 13.58 |
Legal (Korea) | 190.0 x 268.0 | 7.48 x 10.55 |
German Legal Fanfold | 216.0 x 330.0 | 8.50 x 13.00 |
Foolscap/Folio | 216.0 x 330.0 | 8.50 x 13.00 |
Foolscap (Australia) | 206.0 x 337.0 | 8.11 x 13.27 |
F4A | 216.0 x 343.0 | 8.50 x 13.50 |
16K | 195.0 x 270.0 | 7.68 x 10.63 |
8K | 270.0 x 390.0 | 10.63 x 15.35 |
The available regional paper types depend on your device.
[Page Options] > [Page Options] Dialog Box
Specifies layout options such as borders, date, page numbers, etc. and overlay printing settings.
This also enables a document name, computer name, and print time to be inserted. The display format for dates and times depends on the settings of the operating system.
[Format Settings] > [Format Settings] Dialog Box
Enables you to configure font settings when printing the date, user name, and/or page numbers.
[Restore Defaults]
Returns all the settings to their default values.