<Fax Settings>

Specify the fax send settings.
 
For information on the items ("A", "B", "C", and "No") in the "Import All Function" column, see Import All Function.

<Register Favorite Settings>/<Edit Favorite Settings>

 (Settings/Register)  <Function Settings>  <Send>  <Fax Settings>
You can register frequently used settings in a button of the machine for later use when sending a fax. You can also assign a name to a button and enter a comment. You can also delete or rename registered settings.Registering a Combination of Frequently Used Functions
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Import All Function
Name of Item When Exporting with the Remote UI
<Register Favorite Settings>
Confirm Settings
Yes
Yes
No
C
Favorite Settings
Select Location: <M1> to <M18>
Yes
Yes
No
C
Favorite Settings
<Show Comments>: <On>, <Off>
Yes
Yes
No
C
Settings/Registration Basic Information
<Name>, <Comment>
Yes
Yes
No
C
Favorite Settings
<Edit Favorite Settings>
Select the Button: <M1> to <M18>
Yes
Yes
No
C
Favorite Settings
Settings/Registration Basic Information
<Show Comments>: <On>, <Off>
<Delete>, <Check Content>, <Rename>

<Display Confirmation for Favorite Settings>

 (Settings/Register)  <Function Settings>  <Send>  <Fax Settings>
You can select whether to display a confirmation screen when recalling "Favorite Settings."
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Import All Function
Name of Item When Exporting with the Remote UI
<Display Confirmation for Favorite Settings>
<On>, <Off>
Yes
Yes
No
C
Settings/Registration Basic Information

<Default Screen>

 (Settings/Register)  <Function Settings>  <Send>  <Fax Settings>
You can specify the screen to display when <Fax> or  (Reset) is pressed.
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Import All Function
Name of Item When Exporting with the Remote UI
<Default Screen>
<Standard>, <One-Touch>, <Favorite Settings>, <Address Book>
Yes
Yes
No
C
Settings/Registration Basic Information
*1 Indicates items that appear only when the appropriate optional products are available for use.

<Restrict Address Book Use>

 (Settings/Register)  <Function Settings>  <Send>  <Fax Settings>
You can select whether to hide the Address Book and one-touch buttons on the Fax Basic Features screen, etc., as well as whether to restrict use of the Address Book.
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Import All Function
Name of Item When Exporting with the Remote UI
<Restrict Address Book Use>
<On>, <Off>
Yes
Yes
No
C
Settings/Registration Basic Information

<Change Default Settings>

 (Settings/Register)  <Function Settings>  <Send>  <Fax Settings>
You can change the settings registered as default for the <Fax> function.
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Import All Function
Name of Item When Exporting with the Remote UI
<Change Default Settings>
<Register>, <Initialize>
Yes
Yes
No
C
Favorite Settings

<Register Options Shortcuts>

 (Settings/Register)  <Function Settings>  <Send>  <Fax Settings>
You can register modes in the shortcut keys displayed on the <Fax> screen.Customizing the Basic Features Screen
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Import All Function
Name of Item When Exporting with the Remote UI
<Register Options Shortcuts>
<Shortcut 1>:
<Density>, Each mode, <Unassigned>
Yes
Yes
No
C
Favorite Settings
<Shortcut 2>:
<Original Type>, Each mode, <Unassigned>
<Shortcut 3>:
<2-Sided Original Settings>, Each mode, <Unassigned>
<Shortcut 4>:
<Preview>, Each mode, <Unassigned>

<Register Sender Name (TTI)>

 (Settings/Register)  <Function Settings>  <Send>  <Fax Settings>
You can register any name as the sender name, such as the section or department's name, or an individual's name, and edit/delete registered names. The registered name is printed on paper at the recipient as the sender information when you send a fax.
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Import All Function
Name of Item When Exporting with the Remote UI
<Register Sender Name (TTI)>
<Register/Edit>, <Delete>
Yes
Yes
Yes
C
Settings/Registration Basic Information
You can store up to 99 sender names (01 to 99).

<Use Authentication User Name as Sender Name>

 (Settings/Register)  <Function Settings>  <Send>  <Fax Settings>
If logging in with personal authentication management, the login name appears in <100> on the <Sender Name (TTI)> screen. If <On> is selected, the login name in <100> is used as the default setting for the sender name.
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Import All Function
Name of Item When Exporting with the Remote UI
<Use Authentication User Name as Sender Name>
<On>, <Off>
Yes
No
No
C
Settings/Registration Basic Information
If this setting is set to <Off>, the user name in <0> is used as the default setting for the sender name. For instructions on registering a user name, see Fax Line Settings.

<Off-Hook Alarm>

 (Settings/Register)  <Function Settings>  <Send>  <Fax Settings>
If the telephone handset is not returned to the machine correctly after sending or receiving a fax, the user is notified with an alarm.
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Import All Function
Name of Item When Exporting with the Remote UI
<Off-Hook Alarm> *1
<On>, <Off>
Yes
Yes
Yes
C
Settings/Registration Basic Information
*1 Indicates items that can be selected only when a telephone handset is connected to the machine.

<ECM TX>

 (Settings/Register)  <Function Settings>  <Send>  <Fax Settings>
You can set whether to use ECM in the fax transmission protocol. ECM checks for fax data errors and corrects them.
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Import All Function
Name of Item When Exporting with the Remote UI
<ECM TX>
<On>, <Off>
Yes
Yes
Yes
C
Settings/Registration Basic Information
If the communication speed appears to be extremely slow, you may be able to improve the speed by setting to <Off>.
Even when you set ECM, errors can sometimes occur due to a poor telephone line connection.
The conditions for successful ECM transmission are indicated below.
ECM transmission is enabled with this setting
The destination supports ECM
<ECM TX> was set to <On> when registering the destination address to the Address Book Registering Destinations in the Address Book

<Set Pause Time>

 (Settings/Register)  <Function Settings>  <Send>  <Fax Settings>
You can set the number of seconds to pause when sending faxes. Some overseas dialing may not be successful when dialing the international access code, country code, and the destination's telephone number all at once. In such cases, inserting a pause after the international access code can make it easier to connect.
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Import All Function
Name of Item When Exporting with the Remote UI
<Set Pause Time>
1 to 2 to 15 sec.
Yes
Yes
Yes
C
Settings/Registration Basic Information
Pauses entered at the end of dialed fax numbers are always 10 seconds long.

<Auto Redial>

 (Settings/Register)  <Function Settings>  <Send>  <Fax Settings>
Auto Redial enables the machine to automatically redial the recipient's fax number if the recipient cannot be reached due to a busy line, or if a sending error occurs. If you activate this setting, you can set how many times the machine redials, the redial interval, and whether the document should be resent when there is an error.
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Import All Function
Name of Item When Exporting with the Remote UI
<Auto Redial>
<On>, <Off>
Yes
Yes
Yes
C
Settings/Registration Basic Information
<Set Details>:
<Number of Redials>: 1 to 2 to 10 times
<Redial Interval>: 2 to 99 minutes
<Redial When TX Error>: <Error and 1st Page>, <All Pages>, <Off>

<Check Dial Tone Before Sending>

 (Settings/Register)  <Function Settings>  <Send>  <Fax Settings>
If you are sending a fax from your machine at the same time another fax machine (made by a company other than Canon) is trying to send you a fax, your fax may end up being redirected to that fax machine, instead of the original destination you had intended. Activating this setting enables you to avoid such sending problems.
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Import All Function
Name of Item When Exporting with the Remote UI
<Check Dial Tone Before Sending>*1
<On>, <Off>
Yes
Yes
Yes
C
Settings/Registration Basic Information
*1 Indicates items that may not be displayed on the Settings/Registration screen or that may have different default setting, depending on the region.

<Fax TX Result Report>

 (Settings/Register)  <Function Settings>  <Send>  <Fax Settings>
A Fax TX Report is a report that enables you to check whether faxes were sent correctly to their intended destinations. The machine can be set to print this report automatically after documents are sent or only when a transmission error occurs. You can also specify the setting to print the first part of the document as part of the report to remind you of the document's content. Fax TX Result Report
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Import All Function
Name of Item When Exporting with the Remote UI
<Fax TX Result Report>
<For Error Only>, <On>, <Off>
Yes
No
Yes
C
Settings/Registration Basic Information
When <For Error Only> is selected:
<Report with TX Image>: <On>, <Off>
When <On> is selected:
<Report with TX Image>: <On>, <Off>

<Fax Activity Report>

 (Settings/Register)  <Function Settings>  <Send>  <Fax Settings>
You can print or send fax document sending/receiving logs as a report. The machine can be set to print or send this report when a specified number of communications (40 to 1,000) is reached or at a specified time. The send/receive reports can also be printed or sent separately. Fax Activity Report
When the report is sent as data, it is sent in the CSV file format.
 
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Import All Function
Name of Item When Exporting with the Remote UI
<Fax Activity Report>
<Print/Send for Each Specified No. of Transm.>: <Print>, <Send>, <Off>
Yes
No
Yes
C
Settings/Registration Basic Information
Number of transmissions: 40 to 1000
<Print/Send at Specified Time>: <Print>, <Send>, <Off>
Specify Print Time: 00:00 to 23:59
<Print Send/Receive Jobs Separately>: On, Off
<Destination>

<Set Line>

 (Settings/Register)  <Function Settings>  <Send>  <Fax Settings>
Specify the fax line settings.

<TX Start Speed>

 (Settings/Register)  <Function Settings>  <Send>  <Fax Settings>
You can change the send start speed. This setting is useful when there is difficulty initiating the sending of a document due to a poor line condition.
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Import All Function
Name of Item When Exporting with the Remote UI
<TX Start Speed>
<33600 bps>, <14400 bps>, <9600 bps>, <7200 bps>, <4800 bps>, <2400 bps>
Yes
No
Yes
C
Settings/Registration Basic Information
If your document transmission is slow in starting, this may mean that the telephone lines in your area are in poor condition. Select a slower speed. You can select <33600 bps>, <14400 bps>, <9600 bps>, <7200 bps>, <4800 bps>, or <2400 bps>.
Set <Auto Adjust Communication Speed When Using VoIP> to <On> to send and receive faxes more accurately when the line or other party is prone to errors. The communication speed is limited to <14400 bps> or slower, which reduces errors. If <Auto Adjust Communication Speed When Using VoIP> is set to <Off>, the speed returns to the value displayed in <TX Start Speed>.

<R-Key Setting>

 (Settings/Register)  <Function Settings>  <Send>  <Fax Settings>
If your machine is connected through a PBX (Private Branch Exchange), it is necessary to set the access method. You can set the PBX type to <Prefix> or <Hooking>. If you register the outside line access number in the R-key, you can easily access the outside line.
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Import All Function
Name of Item When Exporting with the Remote UI
<R-Key Setting>
<PSTN>, <PBX>
When <PBX> is selected:
<Prefix> (20 digits maximum), <Hooking>
Yes
No
Yes
C
Settings/Registration Basic Information

<Confirm Entered Fax Number>

 (Settings/Register)  <Function Settings>  <Send>  <Fax Settings>
To prevent sending a fax to an incorrect destination, you can select whether to display an entry confirmation screen when entering a fax number.
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Import All Function
Name of Item When Exporting with the Remote UI
<Confirm Entered Fax Number>
<On>, <Off>
Yes
No
Yes
C
Settings/Registration Basic Information

<Allow Fax Driver TX>

 (Settings/Register)  <Function Settings>  <Send>  <Fax Settings>
You can select whether to allow sending a fax from a computer.
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Import All Function
Name of Item When Exporting with the Remote UI
<Allow Fax Driver TX>
<On>, <Off>
Yes
No
Yes
C
Settings/Registration Basic Information

<Confirm Before Sending When Fax Dest. Included>

 (Settings/Register)  <Function Settings>  <Send>  <Fax Settings>
You can select whether to display a destination confirmation screen when sending to destinations containing faxes. This helps prevent you from sending a fax to an incorrect destination.
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Import All Function
Name of Item When Exporting with the Remote UI
<Confirm Before Sending When Fax Dest. Included>
<On>, <Off>
No
No
Yes
C
Settings/Registration Basic Information
When <On> is selected:
<Only for Seq. Broadcast>, <All>

<Restrict Sequential Broadcast When Fax Dest. Included>

 (Settings/Register)  <Function Settings>  <Send>  <Fax Settings>
You can select whether to restrict sending to multiple destinations containing faxes at the same time.
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Import All Function
Name of Item When Exporting with the Remote UI
<Restrict Sequential Broadcast When Fax Dest. Included>
<On>, <Off>
No
No
Yes
C
Settings/Registration Basic Information

<Remote Fax Settings>

 (Settings/Register)  <Function Settings>  <Send>  <Fax Settings>
Specify the settings on the server machine for the Remote Fax function.

<Auto Adjust Communication Speed When Using VoIP>

 (Settings/Register)  <Function Settings>  <Send>  <Fax Settings>
You can send and receive faxes more accurately when the line or other party is prone to errors.
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Import All Function
Name of Item When Exporting with the Remote UI
<Auto Adjust Communication Speed When Using VoIP>
<On>, <Off>
Yes
Yes
Yes
C
Settings/Registration Basic Information
If you set this to <On>, the communication speed is limited to <14400 bps> or slower in the following settings, which reduces errors. If you set this to <Off>, the speeds return to their original values.
 <Sending Speed> for destinations registered in the Address Book or one-touch buttons Registering Destinations in the Address Book
 The transmission speed set in <TX Start Speed> <TX Start Speed>
 The reception speed set in <RX Start Speed> <RX Start Speed>
A04E-0J5