Preparing to Send Faxes
To send faxes with the machine, you need to configure the initial fax settings, such as the fax number of the machine and the type of telephone line.
If you configured the fax settings on the screen that appeared when you started the machine for the first time (Setup Guide), you do not need to configure the initial fax settings.
Configuring the Default Settings (Setup Guide)When Initial Fax Settings Have Not Been Configured or You Want to Change the Settings
If you did not configure the fax settings with the Setup Guide, configure the initial fax settings in the [Settings/Registration] menu.
You can also change the settings configured with the Setup Guide individually.
When Sending Faxes from a Computer
You need to make preparations on each computer used to send faxes.
NOTE
Sender information, such as the send date and time and the fax number of the machine, is printed together with the fax content at the destination. You can change the print position and the mark added to the fax number, or choose not to print the sender information.
[TX Terminal ID]