imagePASS Connection Restrictions and Precautions
When imagePASS is connected to the machine, some functions are restricted or unavailable. In addition, precautions are required when using Advanced Space and Remote UI.
For more information, see the manual supplied with imagePASS.
For more information, see the manual supplied with imagePASS.
Restrictions
Functions Not Available When Connected to imagePASS
Wired LAN connection (sub line)
Wireless LAN connection (main line and sub line)
Direct Connection
Setup Guide
Security Policy Settings
[Print] on the [Home] screen (including Forced Hold prints)
Encrypted Secure Print
Direct Print (PDF, JPEG, TIFF)
WSD Scan
Mopria
Hold
Virtual Printer
IPSec
AirPrint
Universal Print
uniFLOW Online
Sending using the FTPs protocol
Scheduled Print from the printer driver
The following settings of the printer driver:
Secure Watermark printing and Page Number printing at the same time
Booklet printing and Page Layout other than 1in1 (standard) at the same time
Print Function Restrictions
imagePASS cannot be used at the same time as the following print function:
The standard print function on the machine
PS Printer Kit 
Other Restrictions
Reception always times out in five minutes regardless of the reception timeout setting on the machine.
The IP address is not printed even when the user information is specified to be printed. Adding User Information (Forced Print of Recognition Information)
The machine must be restarted after performing DNS Dynamic Update.
The address of the SIP server cannot be acquired automatically using DHCP.
The machine does not enter sleep status to enable immediate response to inquiries via the network.
Precautions When Using Advanced Space
When imagePASS Is Connected to the Machine
Advanced Space cannot be opened as an SMB server. To open externally, open as a WebDAV server. Preparations for Using Advanced Space
To configure the settings to send an e-mail notification when a file is stored to Advanced Space, specify the path to the target folder while including the port number (when TLS is disabled: 18080, when TLS is enabled: 18443) as shown below. Sending Notification by E-mail When a File Is Saved
When TLS is disabled
http://<IP address or host name>:18080/<share or users>/<folder name> |
When TLS is enabled
http://<IP address or host name>:18443/<share or users>/<folder name> |
Example: When specifying a Shared Space [documents] folder with TLS enabled
https://192.168.1.21:18443/share/documents
https://192.168.1.21:18443/share/documents
When using a proxy to send data to Advanced Space via [Scan and Send] on the [Home] screen, the data may not be sent even if a loopback address is specified for the destination. In this case, specify the IP address of imagePASS for the destination. Specifying Destinations
When Connecting to Advanced Space on Another Device Connected to imagePASS
When sending or saving data to Advanced Space on another device connected to imagePASS, specify the destination and connection destination using the following procedure:
In [Protocol], select [WebDAV].
In [Host Name], specify an IP address or host name including the port number as shown below (when TLS is disabled: 18080, when TLS is enabled: 18443).
When TLS is disabled
http://<IP address or host name>:18080 |
When TLS is enabled
http://<IP address or host name>:18443 |
Precautions When Using Remote UI
On the control panel, configure the [Network Settings] item in the [Print Server] screen in advance.
To start Remote UI, enter the following URL in a Web browser on a computer.
http://<IP address of imagePASS>/ |
Click [Launch Remote UI] on the displayed WebTools screen to start Remote UI.