[Paper Output]

Configure the finishing settings for printing.
* Values in red text indicate the default setting for each item.
[Finishing]
[Punch]
[Fold]
[Finishing]
[ Settings/Registration] [Function Settings] [Printer] [Printer Settings] [Custom Settings] [Paper Output]
Configure the settings for sorting and stapling the printed paper. Options with Finishing Functions
[Finishing]
[Off], [Collate], [Group], [Rotate+Collate]*1, [Rotate+Group]*1, [Offset+Collate]*1, [Offset+Group]*1, [Staple + Collate]*1, [Staple + Group]*1, [Eco(Stpl-Fr) + Collate]*1*2, [Eco (Stpl-Fr) + Group]*1*2
[Offset Copies]*3
1 to 9999 (copies)
[Binding Position]
[Corner (Upper-L)], [Double (Top)], [Corner (Upper-R)], [Double (Right)], [Corner (Lower-R)], [Double (Bottom)], [Corner (Lower-L)], [Double (Left)]
*1This item may not be displayed depending on the installed option.
*2Only a corner binding position can be set when using this item.
*3Set this item when you select [Offset+Collate].
IMPORTANT
You may not be able to perform printing if the print data has a large number of pages.
NOTE
When you select a "Rotate" setting, load the same size paper into the paper source in the portrait or landscape orientation. You can use the A4, B5, or Letter paper size.
The positions in [Binding Position] correspond to the positions when a portrait image is printed on paper in portrait orientation. For a landscape image printed on paper in the landscape orientation, the staple position when the image is viewed upright is different from the specified binding position.
When you select a "Staple" or "Eco (Staple-Free)" setting, the number of sheets that can be bound varies depending on the paper to be used. Supported Options
When you configure the settings to perform stapling and hole punching at the same time, you need to configure the same setting for [Binding Position] and [Punch Position]. If the positions do not match, both settings will be disabled and the machine will not perform stapling and hole punching. [Punch]
* The settings are enabled when you set [Binding Position] to "Upper Left" and [Punch Position] to "Left."
[Punch]
[ Settings/Registration] [Function Settings] [Printer] [Printer Settings] [Custom Settings] [Paper Output]
Set whether to punch holes in the printed paper.
When you set the machine to punch holes, also set the position and number of holes to punch.
* This setting is displayed only when the finisher and puncher unit are installed.
[Punch]
[On], [Off]
[Punch Position]
[Left], [Right], [Top], [Bottom]
[Punch Type]
[Finisher (2 Hole)], [Finisher (3 Hole)]*1, [Finisher (4 Hole)]
*1For Asia/Oceania and Americas only
NOTE
When you configure the settings to perform stapling and hole punching at the same time, you need to configure the same setting for [Binding Position] and [Punch Position]. If the positions do not match, both settings will be disabled and the machine will not perform stapling and hole punching. [Finishing]
* The settings are enabled when you set [Binding Position] to "Upper Left" and [Punch Position] to "Left."
[Fold]
[ Settings/Registration] [Function Settings] [Printer] [Printer Settings] [Custom Settings] [Paper Output]
Set whether the machine folds the printed paper when the paper is output.
When you set the machine to fold and output paper, set the type of fold and other settings.
* This item is displayed only when the booklet finisher is installed.
[Fold]
[On], [Off]
[Fold Type]
[Z-Fold]*1, [Saddle Fold], [Saddle C-Fold]
[Saddle Fold Sheet Together]
1 to 5 (sheets)
[Saddle C-Fold Sheets Together]
1 to 6 (sheets)
*1This item may not be displayed depending on the installed option.
NOTE
You can adjust the position where the paper is folded. [Adjust Fold Position]
A08C-221