Set which functions use each output tray as the output destination. Also specify the output tray priority when multiple trays are to be used for the output of the same function. Output Destination Settings
* This item is displayed only on machines with the option installed.
Configure the settings to sort by inserting paper between each specified number of copies. The machine inserts paper when you print using the Collate (Page Order), Offset, or Staple settings.
[On], [Off]
[Change]
Paper source selection
[Number of Copies]
1 to 10 to 9999
NOTE
Paper is not inserted in the following cases:
When the Group (Same Pages), Group Sort, Booklet, Saddle Stitch, or Fold settings are configured
When you are using tab paper
* The available functions and usable paper vary depending on the model and options.
Set whether to forcibly output excess tab paper, when using tab paper. When you select [On], the machine forcibly outputs the excess tab paper for each copy.
Example: If you are using sets of tab paper that each consist of five sheets, and one copy requires seven sheets of tab paper, load two sets of tab paper in the paper source. In this case, a total of 10 sheets of tab paper are loaded in the paper source. However, since only seven sheets of tab paper are required, the machine will output the remaining three sheets of tab paper.
This site uses cookies to provide its contents and functions and improve their qualities etc. You can find out more about our use of the cookies here. If you select "Reject", only cookies necessary to provide the contents and functions of the site are recorded and stored.