[Hold]

Configure the settings for holding the print data.
* Values in red text indicate the default setting for each item.
[Use Hold Function]
[Time Until Hold Job Auto Delete]
[Store PS/PDF Data to Hold]
[Default Settings for Job Deletion After Printing]
[Use Hold Function]
[ Settings/Registration] [Function Settings] [Hold]
Set whether to use the Hold function.
[On], [Off]
[Time Until Hold Job Auto Delete]
[ Settings/Registration] [Function Settings] [Hold]
Set the amount of time until the machine deletes the held print data.
0 hr. (Off), 1 hr., 2 hr., 3 hr., 6 hr., 12 hr., 1 day, 2 days, 3 days, 7 days, 30 days
NOTE
The elapsed time is reset when an operation is performed on the print data or a job ticket is edited.
[Store PS/PDF Data to Hold]
[ Settings/Registration] [Function Settings] [Hold]
Set whether the machine can hold PS or PDF data sent using the LPR protocol.
[On], [Off]
[Default Settings for Job Deletion After Printing]
[ Settings/Registration] [Function Settings] [Hold]
Change the default setting for whether the machine automatically deletes the held data after it is printed.
* You can change this setting in [Delete After Printing] on the Hold screen.
[On], [Off]
A0YC-210