Is the Data Indicator on the Control Panel Lit or Blinking?
If so, data is being processed. Data is sent after the data indicator turns off. Control Panel
Is the Telephone Cord Connected Correctly?
Check that the supplied telephone cord is connected correctly to the telephone line jack (LINE) on the machine and the telephone line connector on the wall, and fix the connection, as needed. For details about the connection method, see the procedure for connecting to the telephone line. Step 4: Connecting to Telephone Line
Are You Talking on a Telephone Connected to the Machine?
Change the set resolution to a lower resolution when scanning the original.
[Home] screen on the control panel [Fax] [TX/RX Settings] [Resolution] select the resolution.
Step 3: Checking the Send Status
Did You Specify a Correct Destination?
A telephone number may have been specified, or the fax number may be incorrect. Check that the specified destination is correct, and send again.
Are You Sending a Fax via Optical Line
The machine conforms to analog line standards, and sending of faxes via optical line cannot be guaranteed. You may be able to perform operations via optical line, so see the following. Cannot Send or Receive a Fax via Optical Line
Is the Type of Telephone Line Configured Correctly?
The type of telephone line may not be automatically configured correctly. Configure the type of telephone line manually.
Log in to Remote UI [Settings/Registration] [TX Settings] [Fax TX Settings] [Edit] in [Select Line Type], select [Manual] in [Line], select the type of telephone line [OK]
On the control panel, select [Menu] in the [Home] screen, and then select [Function Settings] to configure the settings. [Select Line Type]
* If you do not know the type of telephone line, contact your telephone company.
Did You Specify an Overseas Destination?
If so, you may not have been able to connect correctly to the destination. After entering the international access number or country code, enter the wait time (pause) and lower the communication start speed before sending the fax. Cannot Send a Fax to an International Destination
Is the Send Destination Ready to Receive a Fax?
The power of the receiving device may not be turned on, or the RX Mode may not be configured correctly. Have the other party check these.
This site uses cookies to provide its contents and functions and improve their qualities etc. You can find out more about our use of the cookies here. If you select "Reject", only cookies necessary to provide the contents and functions of the site are recorded and stored.