Setting Output Paper Size for the Entire Document

This section describes how to configure the output paper size for the entire document.

Note
The output paper size setting is saved together with the binder document as the layout setting information of the binder document. If 1-sided printing is configured for the entire document but the following print settings and paper settings are not configured, you can configure the different output paper size only for the specified chapter. Setting Output Paper Size on a Chapter Basis Staple Hole Punch Cover Back Cover Inserted Sheet Tab Paper For details on how to set 1-sided printing, see the following. Configuring 1-Sided/2-Sided Printings for the Entire Document

Note

The output paper size setting is saved together with the binder document as the layout setting information of the binder document.

If 1-sided printing is configured for the entire document but the following print settings and paper settings are not configured, you can configure the different output paper size only for the specified chapter.

Setting Output Paper Size on a Chapter Basis

Staple

Hole Punch

Cover

Back Cover

Inserted Sheet

Tab Paper

For details on how to set 1-sided printing, see the following.

Configuring 1-Sided/2-Sided Printings for the Entire Document

In addition, refer to the following as necessary.

Cautions and Restrictions

Select the output paper size from [Output Size] in the [Print Settings] tab in the Print Settings Pane.

The Preview Pane is updated according to the selected output paper size.

Note
The Status Bar shows the specified output paper size for the entire document. The setting items in [Output Size] vary depending on the printer selected in [Printer Name]. When [Auto] is selected in [Output Size], [Output Size] changes when the following items are set. Anything other than [1 on 1] in [Page Layout] [Print Style] > [2-Sided Printing] [Print Style] > [Booklet Printing] [Staple] [Hole punch] [Sheet for Insertion] [Fold] [Secure Printing Function] If you set [Output Size] to something other than [Auto] for a document including different page orientations or sizes, pages of which the orientation/size is different from the orientation/size of the current paper are automatically enlarged or reduced to fit the paper width (they are not automatically rotated). When [Auto] is selected in [Output Size], the output paper sizes for each page are automatically selected according to the sizes of each page of the original. When [Auto] is selected in [Output Size], operations will vary depending on the settings in [Select Paper Size]. For more information, see the following. [Settings] > [System Settings] > [Common Settings] > [Print/Fax] > [Select Paper Size] Desktop System Settings

Note

The Status Bar shows the specified output paper size for the entire document.

The setting items in [Output Size] vary depending on the printer selected in [Printer Name].

When [Auto] is selected in [Output Size], [Output Size] changes when the following items are set.

Anything other than [1 on 1] in [Page Layout]

[Print Style] > [2-Sided Printing]

[Print Style] > [Booklet Printing]

[Staple]

[Hole punch]

[Sheet for Insertion]

[Fold]

[Secure Printing Function]

If you set [Output Size] to something other than [Auto] for a document including different page orientations or sizes, pages of which the orientation/size is different from the orientation/size of the current paper are automatically enlarged or reduced to fit the paper width (they are not automatically rotated).

When [Auto] is selected in [Output Size], the output paper sizes for each page are automatically selected according to the sizes of each page of the original.

When [Auto] is selected in [Output Size], operations will vary depending on the settings in [Select Paper Size]. For more information, see the following.

[Settings] > [System Settings] > [Common Settings] > [Print/Fax] > [Select Paper Size]

Desktop System Settings