When an Error Message Appears

If you cannot send a fax or the memory is full, or you encounter operation problems, a message appears on the display. Find out more information about messages in the following list.

Amount remaining in the cartridge cannot be displayed correctly.

Cannot export. An error has been detected during file creation.

Cannot find the access point.

Cannot import. A file error has been detected.

Cannot print RX data.

Cannot receive the fax. Make sure the fax was sent correctly by the sender.

Cannot send because more than one destination is specified.

Cannot specify a group.

Cannot use Google Cloud Print. Server authentication failed.

Cannot use Google Cloud Print. Server communication error.

Cleaning failed.

Could not connect. Check the PSK settings.

Could not connect using the wireless LAN. Turn the main power OFF and ON, then configure the settings again.

Could not connect using WPS. Wait a moment, then configure the settings again.

No Paper: XXXX*

No response from the host.

Paper jammed.

Prepare a cartridge.

Shared Key authentication failed. Check the WEP settings.

Size/Settings Mismatch

Specifying and registering new destinations is restricted.

The amount remaining in the cartridge is very low.

The connection with the PC has been lost. Check the connection.

The memory is full.

The memory is full. Scanning will be canceled. Do you want to print?

The number of entered characters is incorrect or invalid characters are used.

The WEP key is not set correctly. Check the WEP settings.

0KCY-0AX