Changing the Port Configuration

Use the following procedure to change the port configuration (printing protocol).
1
Open the printer folder.
"Basic Operations/Various Information for Windows"
2
Right-click the icon for this printer, and then select [Printer properties] or [Properties] from the pop-up menu.
3
Perform the following procedure.
(1)
Display the [Ports] sheet.
(2)
Click [Configure Port].
4
Change the port configuration information.
(1)
Configure the printing protocol settings.
(2)
Click [OK].
For MFNP Port
[Protocol Type]
Select the printing protocol (RAW or LPR).
[Port Number]
Enter the port number of the printing protocol configured on the printer.
For Standard TCP/IP Port
[Protocol]
Select the printing protocol (RAW or LPR).
[Raw Settings]
Enter the port number for RAW configured on the printer in [Port Number].
[LPR Settings]
Enter "lp" in [Queue Name].

NOTE
About printing protocols
RAW (RAW printing):
Printing protocol to use with Windows XP/Vista/7/Server 2003/Server 2008. Enables faster printing than with LPR (LPD printing).
LPR (LPD printing):
Printing protocol normally used with TCP/IP.
Setting the printer port number
"Other Protocol Settings"
5
Click [Close].
0F5J-05S