Configuring and Changing the Port

Use the following procedure to manually configure and change the port.
To change the port configuration (printing protocol), see "Changing the Port Configuration."
1
Open the printer folder.
"Basic Operations/Various Information for Windows"
2
Right-click the icon for this printer, and then select [Printer properties] or [Properties] from the pop-up menu.
3
Perform the following procedure.
(1)
Display the [Ports] sheet.
(2)
Click [Add Port].
4
Select the port type.
(1)
Select [Canon MFNP Port] or [Standard TCP/IP Port].
(2)
Click [New Port].
[Canon MFNP Port]
The port that can automatically detect the IP address of the printer.
Even if the IP address of the printer changes, the port does not have to be changed because a new IP address is detected automatically when the printer and computer are on the same subnet.
MFNP Port only supports IPv4. (It does not support IPv6.)
This option does not appear if you install the printer driver using a method other than Easy Installation. (You cannot specify MFNP Port.)
[Standard TCP/IP Port]
TCP/IP Port that is standard with Windows.
If the IP address of the printer is changed, the port to be used should be changed.
5
Operation procedures vary depending on the type of port to be configured.
When configuring MFNP Port
When configuring Standard TCP/IP Port

When configuring MFNP Port

1.
Select the printer with Auto Detect.
(1)
Select [Auto Detect].
(2)
Select the printer to configure a port.
 
 When a port cannot be detected automatically
Enter the IP address or MAC address of the printer.
If you are not sure about the IP address or MAC address of the printer, see "Checking the IP Address of the Printer" or "Checking the MAC Address of the Printer."
2.
Click [Next].
3.
Click [Add].
4.
Click [Finish].
5.
Proceed to Step 6.

When configuring Standard TCP/IP Port

1.
Click [Next].
2.
Enter the IP address or name of the printer.
(1)
Enter the new IP address or name* of the printer.
* The DNS name to be registered on the DNS server (up to 78 characters)
(2)
Click [Next].
 
 If you are not sure about the value to be entered in [Printer Name or IP Address]
The value to be entered varies depending on how the IP address of the printer was set.
For more details, see "Basic Operations/Various Information for Windows" or ask your network administrator.
 If the printer is not detected
Follow the on-screen instructions and search again for the printer, or see "Basic Operations/Various Information for Windows" and specify [Device Type].
3.
Click [Finish].
4.
Proceed to Step 6.
6
Click [Close].
7
Click [Apply].
8
Click [OK].
NOTE
When changing the port configuration (printing protocol)
"Changing the Port Configuration"
When deleting an unnecessary port
Select the port you want to delete on the [Ports] sheet, and then click [Delete Port].
0F5J-05R