If You Use the Printer by Direct Connection

You can use this printer as a printer directly connected to a network.
Because the printer is configured to obtain the IP address automatically, you can use the network without making any special settings, and you may be able to change the network settings to suit your environment.

 Basic Network Settings
Switching Between Wireless LAN and Wired LAN for the Connection (LBP7110Cw Only)
Specifying the Connection Settings
Setting a Port and Installing the Printer Driver

 Changing the Network Settings for the Printer
Configuring the Protocol Settings
Specifying the Wired LAN Communication Mode and Transmission Speed
Specifying the Waiting Time Until Connected to the Network
Initializing the System Settings

 Checking the Wireless LAN Information (LBP7110Cw Only)

 Checking the MAC Address of the Printer

 Configuring and Changing the Port
Changing the Port Configuration
NOTE
When installing the printer driver
It is recommended that normally the printer driver be installed using "Easy Installation" on the supplied CD-ROM (CD-ROM Setup).
You can specify the printer connection settings and install the printer driver using "Easy Installation" as a series of operations. The e-Manual is also installed simultaneously.
"Easy Installation"
If you changed the IP address after installing the printer driver
When you use MFNP Port, the port does not have to be changed because a new IP address is detected automatically when the printer and computer are on the same subnet.
When you use Standard TCP/IP Port, the port to be used with the printer driver should be changed.
"Configuring and Changing the Port"
If you do not know which port you are using, see "Basic Operations/Various Information for Windows."
0F5J-051