Loading Preprinted Paper
When you use paper that has been preprinted with a logo, pay attention to the orientation of the paper when loading. Load the paper properly so that printing is performed on the correct side of the paper with a logo.
|
|
|
This section mainly describes how to load preprinted paper with the proper facing and orientation. For a description of the general procedure for loading paper in the paper drawer or multi-purpose tray, see the corresponding section shown below.
|
Making 1-Sided Printouts on Paper with Logos
Printing on Paper with Logos in Portrait Orientation
In the Paper Drawer
Load the paper with the logo side (the side to print the document) face down.
In the Multi-Purpose Tray
Load the paper with the logo side (the side to print the document) face up.
Printing on Paper with Logos in Landscape Orientation
In the paper drawer
Load the paper with the logo side (the side to print the document) face down.
In the multi-purpose tray
Load the paper with the logo side (the side to print the document) face up.
Making 2-Sided Printouts on Paper with Logos
When a document to print consists of an odd number of pages, set <Alternative Method> to <Off> in the setting menu of the operation panel. Alternative Method
Printing on Paper with Logos in Portrait Orientation
In the paper drawer
Load the paper with the front logo side (the side to print the first page of the document) face up.
In the multi-purpose tray
Load the paper with the front logo side (the side to print the first page of the document) face down.
Printing on Paper with Logos in Landscape Orientation
In the paper drawer
Load the paper with the front logo side (the side to print the first page of the document) face up.
In the multi-purpose tray
Load the paper with the front logo side (the side to print the first page of the document) face down.
|
|
The <Paper Feed Method> settingWhen you print on preprinted paper, you need to change the facing of the paper to load each time you perform 1-sided and 2-sided printing. However, if <Paper Feed Method> is set to <Print Side Priority> in the setting menu of the operation panel, the facing that you use for loading preprinted paper for 2-sided printing (logo side face down) can also be used for 1-sided printing. This setting is especially useful if you frequently perform both 1-sided and 2-sided printing. Paper Feed Method
|