Overview of Printer Settings

The following table lists all settings of the Printer Settings menu.

Printer Menu

: Available - : Unavailable
Item
Settings
Default Settings
Device Information
Delivery Available
[PDL Selection (Plug-n-play)]
UFR II, PCL5c, PCL6, PS3, UFR II (XPS), Fax
N/A
-

Settings Menu (Common Settings)

: Available - : Unavailable
Item
Settings
Default Settings
Device Information
Delivery Available
[Copies]
1 to 9999
1
[2-Sided Printing]
On, Off
Off
[Paper Feed]
[Default Paper Size]
Letter, Legal, A4, B5, A3, B4, A5, 11x17, Executive, Statement, Env.
KAKUGATA 2, Env. NAGAGATA 3, Env. YOGATANAGA3, Envelope Monarch, Env. No. 10, Envelope ISO-B5, Envelope ISO-C5, Envelope DL, 320x450 mm(SRA3), 305x457 mm
A4
-
[Default Paper Type]
Thin, Plain 1, Plain 2, Plain 3, Recycled, Color, Pre-punched, Bond, Heavy 1, Heavy 2, Heavy 3, Transparency, Tracing, 1-Side Coated 1, 1-Side Coated 2, 2-Side Coated 1, 2-Side Coated 2, Labels, Envelope
Plain 1*1
-
[Paper Size Override]
On, Off
Off
[Print Quality]
[Density]*2
Cyan: -8 to +8
0
Magenta: -8 to +8
Yellow: -8 to +8
Black: -8 to +8
[Toner Save]
On, Off
Off
[Gradation]
Standard, High 1, High 2
High 1
[Resolution]
1200 dpi, 600 dpi
600 dpi
[Special Smoothing Mode]
Mode 1, Mode 2, Mode 3, Mode 4, Mode 5, Mode 6
Mode 1
[Toner Volume Adjustment]
Normal, Gradation, Text
Normal
[Line Control]
Resolution, Gradation
Resolution
[Layout]
[Binding Location]
Long Edge, Short Edge
Long Edge
[Gutter]
-50.0 mm to +50.0 mm
0.0
[Offset Short Edge (Front)]
-50.0 mm to +50.0 mm
0.0
[Offset Long Edge (Front)]
-50.0 mm to +50.0 mm
0.0
[Offset Short Edge (Back)]
-50.0 mm to +50.0 mm
0.0
[Offset Long Edge (Back)]
-50.0 mm to +50.0 mm
0.0
[Auto Continue]
On, Off
Off
[Job Securing Time]
1 hour, 2 hours, 3 hours, 6 hours, 12 hours, 24 hours
1 hour
[Timeout]
Timeout (5 to 300 seconds), Off
15 seconds
[Print After Completing RIP]
On, Off
Off
[Finishing]
Off, Collate, Rotate+Collate, Rotate+Group, Offset+Collate, Copies, Offset+Group, Staple+Collate, Staple+Group
Copies to Offset (Offset+Collate): 1 to 9999
Staple Position (Staple+Collate):
Corner (Upper-L), Double (Top), Corner (Upper-R), Double (Right), Corner (Lower-R), Double (Bottom), Corner (Lower-L), Double (Left)
Staple Position (Staple+Group):
Grp Upp L-Corner, Grp Double(Top), Grp Upp R-Corner, Grp Double(R), Grp Lwr R-Corner, Grp Double(Btm), Grp Lwr L-Corner, Grp Double(L)
Off
Copies to Offset: 1
[Transparency Interleaving]*3
Off, Blank, Printed
Off
[Copy Set Numbering]*4
[Copy Set Numbering]
On, Off
Off
[Print Position]
5 Locations, Top Left, Bottom Left, Top Right, Bottom Right, Full Surface
5 Locations
[Starting Number]
1 to 9999
1
[Number Size]
Small(12 point), Medium(24 point), Large(36 point)
Large(36 Point)
[Density]
1 to 5
3
[Color]
Yellow, Magenta, Cyan, Black
Black
[Number Position Vertical]
-8 mm to +8 mm
0
[Number Position Horizontal]
-8 mm to +8 mm
0
[Personality]*5
Auto, PS, PCL, Imaging, PDF
Auto
-
[Mode Priority]*5
None, PS, PCL, PDF
None
-
[Color Mode]
Auto (Color/B&W), Color, Black and White
Auto (Color/B&W)
[Gradation Settings]
Gradation: Off, Smooth 1, Smooth 2
Off
Graphics: On, Off
On
Image: On, Off
On
[Compressed Image Output]
Output, Display Error
Output
[Initialize]
Yes, No
-
*1
Depending on the region, the default setting is 'Plain 2'.
*2
Indicates a menu that appears only when you set [Toner Save] to 'Off'.
*3
Indicates a menu that appears only when you set [Copy Set Numbering] to 'Off'.
*4
Indicates a menu that appears only when you set [Transparency Interleaving] to 'Off'.
*5
Settings are not applicable for the UFR II mode.

UFR II Settings

: Available - : Unavailable
Item
Settings
Default Settings
Device Information
Delivery Available
[Halftones]
Err Diffusion(600dpi only): On, Off
Off
Text: Resolution, Gradation
Resolution
Graphics: Resolution, Gradation
Gradation
Image: Resolution, Gradation
Gradation
[RGB Source Profile]
Text: sRGB, Gamma 1.5, Gamma 1.8, Gamma 2.4, Download Profile
sRGB
-
Graphics: sRGB, Gamma 1.5, Gamma 1.8, Gamma 2.4, Download Profile
Image: sRGB, Gamma 1.5, Gamma 1.8, Gamma 2.4, Download Profile
[Output Profile]
Text: Normal, Photo
Normal
-
Graphics: Normal, Photo
Normal
Image: Normal, Photo
Photo
[Matching Method]
Text: Perceptual, Saturation, Colorimetric
Saturation
Graphics: Perceptual, Saturation, Colorimetric
Perceptual
Image: Perceptual, Saturation, Colorimetric
[Gray Compensation]
Text: On, Off
On
Graphics: On, Off
Image: On, Off
[CMS (Matching) Selection]
Printer, Host
Printer
[CMS (Matching)/Gamma]
Text: Gamma, CMS
Gamma
Graphics: Gamma, CMS
Image: Gamma, CMS
[Gamma]
Text: 1.0, 1.4, 1.8, 2.2
1.4
Graphics: 1.0, 1.4, 1.8, 2.2
Image: 1.0, 1.4, 1.8, 2.2
[Paper Save]
On, Off
On
[Advanced Smoothing]
Advanced Smoothing: Off, Smooth 1, Smooth 2
Smooth 1
Graphics: On, Off
Off
Text: On, Off
On

PCL Settings (PCL or PS Printer only)

: Available - : Unavailable
Item
Settings
Default Settings
Device Information
Delivery Available
[Paper Save]
On, Off
Off
[Orientation]
Portrait, Landscape
Portrait
[Font Number]
0 to 104
0
-
[Point Size]*6
4.00 to 999.75 point
12.00 point
-
[Pitch]*7
0.44 to 99.99 cpi
10.00 cpi
-
[Form Lines]
5 to 128 lines
64 lines
-
[Symbol Set]
ARABIC8, DESKTOP, GREEK8, HEBREW7, HEBREW8, ISO4, ISO6, ISO11, ISO15, ISO17, ISO21, ISO60, ISO69, ISOCYR, ISOGRK, ISOHEB, ISOL1, ISOL2, ISOL5, ISOL6, LEGAL, MATH8, MCTEXT, MSPUBL, PC775, PC8, PC850, PC851, PC852, PC862, PC864, PC866, PC8DN, PC8GRK, PC8TK, PC1004, PIFONT, PSMATH, PSTEXT, ROMAN8, VNINTL, VNMATH, VNUS, WIN30, WINARB, WINBALT, WINCYR, WINGRK, WINL1, WINL2, WINL5
PC8
[Custom Paper]
On, Off
Off
-
[Unit of Measure]
Millimeters, Inches
Millimeters
-
[X dimension]
139.7 mm to 1,200 mm
457.2 mm
-
[Y dimension]
99.0 mm to 320 mm
320 mm
-
[Append CR to LF]
Yes, No
No
[Enlarge A4 Print Width]
On, Off
Off
[Halftones]
Err Diffusion(600dpi Only): On, Off
Off
Text: Resolution, Gradation
Resolution
Graphics: Resolution, Gradation
Gradation
Image: Resolution, Gradation
Gradation
[RGB Source Profile]
Text: sRGB, Gamma 1.5, Gamma 1.8, Gamma 2.4, Download Profile
sRGB
-
Graphics: sRGB, Gamma 1.5, Gamma 1.8, Gamma 2.4, Download Profile
Image: sRGB, Gamma 1.5, Gamma 1.8, Gamma 2.4, Download Profile
[Output Profile]
Text: Normal, Photo
Normal
-
Graphics: Normal, Photo
Normal
Image: Normal, Photo
Photo
[Matching Method]
Text: Perceptual, Saturation, Colorimetric
Saturation
Graphics: Perceptual, Saturation, Colorimetric
Perceptual
Image: Perceptual, Saturation, Colorimetric
[Gray Compensation]
Text: On, Off
On
Graphics: On, Off
Image: On, Off
[CMS (Matching) Selection]
Printer, Host
Printer
[CMS (Matching)/Gamma]
Text: Gamma, CMS
Gamma
Graphics: Gamma, CMS
Image: Gamma, CMS
[Gamma]
Text: 1.0, 1.4, 1.8, 2.2
1.4
Graphics: 1.0, 1.4, 1.8, 2.2
Image: 1.0, 1.4, 1.8, 2.2
[Advanced Smoothing]
Advanced Smoothing: Off, Smooth 1, Smooth 2
Smooth 1
Graphics: On, Off
Off
Text: On, Off
On
*6
Indicates a menu that appears only if [Font Number] is specified from '1' to '78'.
*7
Indicates a menu that appears only if [Font Number] is specified from as '0' or as from '79' to '104'.

PS Settings (PS Printer only)

: Available - : Unavailable
Item
Settings
Default Settings
Device Information
Delivery Available
[Job Timeout]
0 to 3600 seconds
0
[Print PS Errors]
On, Off
Off
[Pure Black Text]
On, Off
On
[Black Overprint]
On, Off
On
[RGB Source Profile]
sRGB, Gamma 1.5, Gamma 1.8, Gamma 2.4, None, Download Profile
sRGB
-
[CMYK Simulation Profile]
JapanColor(Canon), US Web Ctd(Canon), Euro Standard, None, Download Profile
None
-
[Use Grayscale Profile]
On, Off
Off
-
[Output Profile]
Normal, Photo, TR Normal, TR Photo, Download Profile
TR Normal
-
[Matching Method]
Perceptual, Saturation, Colorimetric
Perceptual
[RGB Pure Black Process]
On, Off
On
[CMYK Pure Black Process]
On, Off
On
[Halftones]
Err Diffusion(600dpi Only): On, Off
Off
Text: Resolution, Gradation
Resolution
Graphics: Resolution, Gradation
Gradation
Image: Resolution, Gradation
Gradation
[Brightness]
85 to 115%
100%
[Composite Overprint]
On, Off
Off
[Advanced Smoothing]
Advanced Smoothing: Off, Smooth 1, Smooth 2
Smooth 1
Graphics: On, Off
Off
Text: On, Off
On
[Grayscale Conversion]
sRGB, NTSC, Uniform RGB
NTSC

Imaging Settings*8

: Available - : Unavailable
Item
Settings
Default Settings
Device Information
Delivery Available
[Image Orientation]
Auto, Vertical, Horizontal
Auto
[Zoom]
Off, Auto
Off
[Print Position]
Auto, Center, Top Left
Auto
[Show Warnings]
On, Off
On
[Enlarge Print Area]
On, Off
Off
[ICC Profile Settings]
[RGB Source Profile]
sRGB, Gamma 1.5, Gamma 1.8, Gamma 2.4, Download Profile
sRGB
-
[CMYK Simulation Profile]
JapanColor(Canon), US Web Ctd(Canon), Euro Standard, Download Profile
JapanColor(Canon)
-
[Output Profile]
Normal, Photo
Photo
-
[Matching Method]
Perceptual, Saturation, Colorimetric
Perceptual
[Photo Correct (Color Only)]
[Photo Optimizer PRO]
On, Off
Off
-
[Red-Eye Correction]
Red-Eye Correction: On, Off
Off
-
Red-Eye Correction Level: Weak, Standard, Strong
Standard
[Face Brightener]
Face Brightener: On, Off
Off
-
Face Brightener Level: Weak, Standard, Strong
Standard
[Halftones]
Resolution, Gradation, Error Diffusion
Gradation
[Gray Compensation]
On, Off
On
[Grayscale Conversion]
sRGB, NTSC, Uniform RGB
NTSC
*8
Settings are applicable only for the Imaging mode of Direct Print.

PDF Settings (PS Printer or PDF Direct Print Printer only)

: Available - : Unavailable
Item
Settings
Default Settings
Device Information
Delivery Available
[Enlarge/Reduce to Fit Size]
On, Off
Off
[Enlarge Print Area]
On, Off
Off
[N on 1]
Off, 2 on 1, 4 on 1, 6 on 1, 8 on 1, 9 on 1, 16 on 1
Off
[Comment Print]
Off, Auto
Auto
[Pure Black Text]
On, Off
On
[Black Overprint]
On, Off
On
[RGB Source Profile]
sRGB, Gamma 1.5, Gamma 1.8, Gamma 2.4, None, Download Profile
sRGB
-
[CMYK Simulation Profile]
JapanColor(Canon), US Web Ctd(Canon), Euro Standard, None, Download Profile
None
-
[Use Grayscale Profile]
On, Off
Off
-
[Output Profile]
Normal, Photo, TR Normal, TR Photo, Download Profile
TR Normal
-
[Matching Method]
Perceptual, Saturation, Colorimetric
Perceptual
[RGB Pure Black Process]
On, Off
On
[CMYK Pure Black Process]
On, Off
On
[Halftones]
Err Diffusion(600dpi Only): On, Off
Off
Text: Resolution, Gradation
Resolution
Graphics: Resolution, Gradation
Gradation
Image: Resolution, Gradation
Gradation
[Brightness]
85 to 115 %
100 %
[Composite Overprint]
On, Off
Off
[Advanced Smoothing]
Advanced Smoothing: Off, Smooth 1, Smooth 2
Smooth 1
Graphics: On, Off
Off
Text: On, Off
On
[Grayscale Conversion]
sRGB, NTSC, Uniform RGB
NTSC

Utility Printer Settings

Item
Settings
[Initialize PCL Hard Disk]*9
-
[Initialize PS Hard Disk]*10
-
[Reset Printer]
-
*9
Settings are applicable only for the PCL mode.
*10
Settings are applicable only for the PS mode.