Checking the MAC Address
You need the MAC address of the printer to set the IP address using NetSpot Device Installer or the ARP/PING command. There are the following three methods for checking MAC addresses.
Checking the Network Ethernet Driver Screen from a Remote UI
1
Start the Remote UI, and then log in as Administrator.
2
Click [Settings/Registration].
3
Select [Network] from the [Preferences] menu.
4
Click [Ethernet Driver Settings].
5
Click [Edit].
6
Check the MAC address.
Printing a Network Status Print from the Printer's Control Panel and Checking It
NOTE |
Loading A4 size paperThe Network Status Print is designed to be printed on A4 size paper. Be sure to load A4 size paper when printing the Network Status Print. |
1
Load A4 size paper in the multi-purpose tray or paper drawer.
2
Press [ 
] (
Utility).
] (Utility).3
Select [Network Status Print] using [ 
] and [ 
], and then press [OK].
] and [ ], and then press [OK].
4
Select [Yes] using [ ], and then press [OK].
], and then press [OK]. 
 | Network Status Print is printed. The MAC address (A) is indicated in [Ethernet Driver Settings] on the upper left of the Network Status Print. |
