Specifying Destinations
This section describes how to specify fax destinations.
See the following sections to specify destinations:
When you are sending the same fax to multiple destinations simultaneously, see the following.
|
For the instructions on how to send a fax, see "Basic Procedures for Sending Faxes."
|
|
NOTE
|
|
If <Method to Specify Dest for TX w/PIN Code> is set to <Do Not Restrict>, you can specify a destination by the one-touch keys, coded dialing codes or address book after entering a PIN code.
|
Specifying Destinations by Entering the Fax Number
Specify the fax number using the numeric keys, [
] (Tone), and [
] (Symbols).
] (Tone), and [] (Symbols).
To modify destinations:
To cancel the entered destination
Press and hold [
] (Clear).
Press and hold [
] (Clear).To delete the last character of the entered destination
Press [] (Clear).
Press [
] (Clear).Specifying Destinations with One-Touch Keys
Press the one-touch key (01 to 30)* in which the destination is registered.
|
*
|
On the FAX-L150 model, the one-touch keys are available from 01 to 15.
|
To select a destination from the one-touch keys, you need to register destinations in these keys in advance.
If you press an incorrect key:
|
(1)
|
Press [
] (Clear). |
|
(2)
|
Press [
 ] to highlight <Yes>, and then press [OK]. |
 |
To clear all the scan settings specified, press [
 ] (Reset). |
Specifying Destinations Using Coded Dialing Codes
Press [
] (Coded Dial), and then enter the three-digit registration number (001 to 100) with the numeric keys.
] (Coded Dial), and then enter the three-digit registration number (001 to 100) with the numeric keys.
To select a destination from the coded dialing codes, you need to register destinations in these codes in advance.
If you press an incorrect key:
|
(1)
|
Press [
] (Clear). |
|
(2)
|
Press [
] to highlight <Yes>, and then press [OK]. |
|
|
To clear all the scan settings specified, press [
] (Reset). |
Specifying Destinations Using Group Addresses
If group addresses are registered to a one-touch keys:
Press the one-touch key (01 to 30)* in which the group address that you want to select is registered.
|
*
|
On the FAX-L150 model, the one-touch keys are available from 01 to 15.
|
If group addresses are registered to coded dialing codes:
Press [] (Coded Dial), and then enter the three-digit registration number (001 to 100) with the numeric keys.
] (Coded Dial), and then enter the three-digit registration number (001 to 100) with the numeric keys.To select a destination from the coded dialing codes, you need to register group addresses in these codes in advance.
If you press an incorrect key:
|
(1)
|
Press [
] (Clear). |
|
(2)
|
Press [
] to highlight <Yes>, and then press [OK]. |
|
|
To clear all the scan settings specified, press [
] (Reset). |
Specifying Destinations Using the Address Book
When you type an alphanumeric character from the operation panel or search for an alphanumeric character in the address book screen, fax numbers with the matched letter or number are displayed. You can select your destination from the displayed numbers.
To select a destination from the address book, you need to register destinations in the address book in advance.
1
Press [
] (FAX/COPY) to switch to the Fax mode screen.
] (FAX/COPY) to switch to the Fax mode screen.2
Press [
] (Address Book).
] (Address Book).3
Press [] or [
] to search for your destination.
] or [] to search for your destination.Select <All> to display all destinations.
Select <
> at the bottom of the screen to add or edit destinations.
> at the bottom of the screen to add or edit destinations.
4
Press [
] or [
] to highlight the destination, and then press [OK].
] or [] to highlight the destination, and then press [OK].