When an Error Message Appears

If you cannot send a fax or the memory is full, or you encounter operation problems, a message appears on the display. Find out more information about messages in the following list.

Cannot analyze the authentication server certificate.

Cannot change the destination type of destinations registered to a group.

Cannot find the access point.

Cannot print RX data.

Cannot receive the fax. Make sure the fax was sent correctly by the sender.

Cannot send because more than one destination is specified.

Cannot specify a group.

Cannot use Google Cloud Print. Server authentication failed.

Cannot use Google Cloud Print. Server communication error.

Cannot use these settings. Sending to the specified destination is restricted.

Cart. communication error. Use of non-Canon cartridges is not covered by the warranty. Amount remaining in the cartridge cannot be displayed correctly.

Cartridge has reached end of lifetime. Rplcmt. recommended.

Change the authentication password.

Check the authentication settings.

Connection failed. Check the PSK settings.

Copying is restricted.

Could not connect using Access Point Mode.

Could not connect using the wireless LAN.

Could not connect using the wireless LAN. Turn the main power OFF and ON, then configure the settings again.

Could not connect using WPS. Wait a moment, then configure the settings again.

Could not connect. The maximum number of devices that can connect to the access point has been reached.

Could not detect any connections from wireless devices.

Could not perform cleaning.

Could not perform correction.

Could not perform Open System authentication. Check the WEP settings.

Could not perform Shared Key authentication. Check the WEP settings.

Direct Connection terminated.

Faxing is restricted.

Insert the toner cartridge.

Memory full. Check error info. using the Status Monitor key.

Memory Media Print is restricted.

No Paper

No reply from the destination.

No response from the host.

Paper jammed.

Paper Size & Settings Mismatch

Prepare a cartridge.

Printing is restricted.

Remote scanning is restricted.

Scanning is restricted.

Set the correct authentication information.

Set the information necessary for authentication.

Specifying and registering new destinations is restricted.

The authentication server certificate has expired.

The authentication server certificate is incorrect.

The cartridge needs to be replaced soon.

The computer is restricted.

The image cannot be recognized.

The memory is full.

The memory is full. Enter the original type settings again.

The memory is full. Process secure print jobs.

The memory is full. Scanning will be canceled. Do you want to print?

The number of entered characters is incorrect or invalid characters are used.

The USB memory is restricted.

The WEP key is not set correctly. Check the WEP settings.

Use of non-Canon cartridges is not covered by the warranty. The amount remaining in the cartridge cannot be displayed correctly.

Use Remote UI to set the information necessary for authentication.

0UWY-0C0