Specifying a PS Password

6FA8-04C
You can specify the password that restricts the use of the control command prepared by the PS printer.
NOTE
[SystemParamsPassword] is a password that allows changes to the system parameter, and [StartJobPassword] is a password that allows startjob, exitserver operator to perform. For more information, check PostScript language specifications.
1
Press (Settings/Registration).
2
Press [Function Settings] → [Printer] → [PS Password Settings].
3
Press [SystemParamsPassword] or [StartJobPassword] → enter each password.
If [StartJobPassword] is set but [SystemParamsPassword] is not set, password check will not be performed while performing startjob, exitserver operator.
Press [OK] → enter the same password to confirm that you have not incorrectly entered the password.
4
Press [OK].

Find manuals for other products
Setting the Machine (PS/PCL/UFR II Printer)
User's Guide (Product Manual)
USRMA-1441-072019-12Copyright CANON INC. 2019