* Depending on the usage condition of the machine, the actual remaining amount of toner may be lower than indicated or the parts may be deteriorated. If the condition persists even after replacing the toner cartridge indicated to have a low amount of toner, it is recommended to replace the other toner cartridges as well.
Step 3: Checking the Originals
Are You Copying an Original with a Colored or Stained Background or an Original with Text or Images Showing Through the Back Side?
Adjusting the density of the background may solve the problem.
[Home] screen on the operation panel [Copy] [Density] [Adjust Background Density] [Adjust (Manual)] adjust the background density.
* Press [Density by Color] to adjust the density of the background by color. * Parts other than the background may also be affected depending on the color of the original.
Step 4: Checking the Maintenance Status
Have You Cleaned the Fixing Assembly?
These symptoms may occur when the fixing assembly is dirty. In this case, clean the fixing assembly. Cleaning the Fixing Assembly
Have You Cleaned the Transfer Belt?
These symptoms may occur when the transfer belt is dirty. In this case, clean the transfer belt. Cleaning the Transfer Belt
This site uses cookies to provide its contents and functions and improve their qualities etc. You can find out more about our use of the cookies here. If you select "Reject", only cookies necessary to provide the contents and functions of the site are recorded and stored.
Portal Top
[Copy] 