Parts and Their Functions

Retains the media in an optimal state and feeds it. You can connect up to three PIMs. PIM (Paper Input Module)

Indicates the press status. Status Indicators

Ejects ink onto the media for printing. PM (Print Module)

Attaches the media to the primary fixing belt with suction, then dries the ink with the heated primary fixing belt and blown air. The media is pressed against the primary fixing belt with strong suction to prevent the media from deformation when the ink and media are dried.

Transports the media held between the upper and lower fixing belts while heating it with heaters.

Cools the media by blowing outside air onto it.

Inverts the media for appropriate transport.

Aligns the printed media and stacks it in the stack tray. When stacking the media in the stack tray is complete, the stack tray is passed to a dolly for removal. You can connect up to three STMs with the delivery path kit. STM (Stacking Module)

Enables you to operate the press.

A controller for managing the performance, workflow, and print quality of the press.