Configuring FTP PASV Mode
PASV mode is an FTP communication mode. You must configure PASV mode when there is a firewall between the FTP server and the machine.
This section describes how to configure the settings using Remote UI from a computer.
On the control panel, select [
Settings/Registration] in the [Home] screen or other screen, and then select [Preferences] to configure the settings. [Use FTP PASV Mode]
Administrator or NetworkAdmin privileges are required.
On the control panel, select [
Settings/Registration] in the [Home] screen or other screen, and then select [Preferences] to configure the settings. [Use FTP PASV Mode]Administrator or NetworkAdmin privileges are required.
Required Preparations
Check that PASV mode has been configured on the FTP server.
1
Log in to Remote UI as an administrator. Starting Remote UI
2
On the Portal page of Remote UI, click [Settings/Registration]. Remote UI Portal Page
3
Click [Network Settings] 
[FTP PASV Mode Settings].
[FTP PASV Mode Settings].The [FTP PASV Mode Settings] screen is displayed.
4
Select the [Use FTP PASV Mode] checkbox, and click [OK].
The settings are applied.
5
Log out from Remote UI.