Preparations for Using a USB Memory Device
This enables saving of scanned data to a USB memory device and printing of files in a USB memory device.
By default, saving and printing are not allowed.
This section describes how to configure the settings using Remote UI from a computer.
On the control panel, select [

Settings/Registration] in the [Home] screen or other screen, and then select [Function Settings] to configure the settings.
[Use Scan/Print Function]Administrator or DeviceAdmin privileges are required. The machine must be restarted to apply the settings.
1
Log in to Remote UI as an administrator.
Starting Remote UI2
On the Portal page of Remote UI, click [Settings/Registration].
Remote UI Portal Page3
Click [Store/Access Files]

[Memory Media Settings].
The [Memory Media Settings] screen is displayed.
4
Select the [Use Scan Function] or [Use Print Function] checkbox, and click [OK].
5
The settings are applied.
NOTE
If a USB Memory Device Is Not Displayed or Recognized
On the control panel, configure the settings to display [Memory Media] in [Scan and Store] or [Access Stored Files] in the [Home] screen.
[Store Location Display Settings]