Configuring the Machine for Scanning to E-mail

Before configuring the machine for scanning to e-mail, check the setup flow shown below.
Make sure that the machine and the computer are correctly connected.
Make sure that you have the following information:
The IP address of the machine Viewing Network Settings
Information about the e-mail server, including the SMTP server name, port numbers, whether authentication is required, and the user name and password for authentication.
E-mail addresses to be registered as destinations
For more information about the e-mail server settings, contact your Internet service provider or Network Administrator.
Set the machine configuration.
You can configure the e-mail settings via the Remote UI.
Register the e-mail destinations in the Address Book.