[Finishing] Pane
You can set finishing options such as two-sided printing, stapling, booklet printing, etc.
[Print Style]
Specifies printing methods such as two-sided printing, booklet printing, etc.
[1-sided Printing]
Prints on one side of the paper.
[2-sided Printing]
Prints on both sides of the paper.
[Booklet Printing]
Prints with the pages of a document arranged so that it can be folded in half to create a booklet.
NOTESelect the finished size of the booklet for [Paper Size] in the [Print] dialog.
When A4 is selected for [Paper Size], the A3 paper that is output is folded into two to make an A4 size booklet.
[Perfect Binding]
Applies glue to the gutter side of the contents and encloses them in a cover to create a booklet.
[Binding Location]
Specifies the binding location.
[Gutter]
Sets the gutter width.
When gutters are set, the printable region of the page is reduced only by the amount equivalent to the set width. In such cases, part of the data that cannot fit within the printable region may not be printed.
[Saddle Stitch Settings]
Sets saddle stitching and trimming methods when creating booklets.
[Trim Settings]
Sets a width when setting a finished width and/or height and trimming the edges of the paper.
[Fore]
Sets the trim width of the opening edge (fore) of a booklet.
[Top/Bottom]
Sets the trim width of the upper edge (top) and lower edge (bottom) of a booklet.
[Booklet]
Sets details required for booklet printing such as opening direction, gutter width, etc.
[Booklet] Dialog
[Book Opening]
Enables you to select whether a document opens to the right or left when creating a booklet.
[Use Creep (Displacement) Correction]
Corrects the offsetting that occurs between outer and inner pages during booklet printing. Select a correction method from [Displacement Correction Method]. If you want to correct offsetting manually, specify the amount of correction in [Correction Width].
[Saddle Press]
Performs saddle press processing when creating a saddle stitched booklet. You can specify the pressing force in [Saddle Press Adjustment].
[Perfect Binding Settings]
Applies glue to the gutter side of the contents and encloses them in a cover to create a booklet.
[Perfect Binding Settings] Dialog
[Book Opening]
Enables you to select whether a document opens to the right or left when creating a booklet.
[Perfect Bound Cover Settings]
Sets the size of a cover and the paper source to be used for the cover.
[Content Page Size]
Sets the paper size to be used for the contents.
[Specify Finishing by]
Selects a method for specifying the finished size of a booklet.
[Finishing Size]
Sets the finished size when creating a booklet.
[Staple]
Staples the pages together.
[Position]
Specifies stapling locations.
The available staple locations vary depending on the output paper size, paper feed direction, and paper source method.
[Misc. Finishing Modes]
Offsets stacks output pages, punches holes in printed pages, etc.
[Misc. Finishing Modes] Dialog
[Offset]
Offsets each stack of output pages.
[Number of Copies for Offset]
Offsets each specified number of output pages.
[Rotate]
Rotates and outputs each print job at 90 degrees.
[Hole Punch]
Outputs printed pages with holes for binding. This function can only be used when enabled at the device.
[Fold Type]
Enable this when outputting pages folded into one of a variety of forms, and specify the type of fold.
 |  |  |  |  |
C-fold (Saddle C-fold) | Z-fold | Saddle Fold | Accordion Z-fold | Double Parallel Fold |
[Fold Details]
When selecting [C-fold], [Saddle C-fold], [Half Fold], [Saddle Fold], [Accordion Z-fold], or [Double Parallel Fold] for the fold type, specify the fold pattern.
NOTEIf Z-fold and stapling are specified together, the fold direction of the Z-fold changes depending on the stapling location.
[Paper Output]
Selects an output destination for printed paper.
[Finishing Details]
Specifies whether pages are output face up or face down, rotates the printing orientation, etc. You can also set watermark printing, copy set numbering, etc.
[Finishing Details] Dialog
[Rotate Print Data 180 Degrees]
Rotates the orientation of the paper when printing paper that must be supplied in a specific direction, such as tab paper, envelopes, etc.
[Calibrate]
Sets color adjustment. Set this if documents are not printed in the specified colors etc.
[Job Note]
Displays a comment regarding the print data. You can check the comment information that has been input in each set of data from the control panel of the device or the Remote UI.
[Glossy Plain Paper Processing]
When printing on normal paper, sets to output it with a glossy appearance.
[Face Up/Face Down]
Specifies whether the printed side is output face up or face down.
[Transparency Printing]
Prints using the method appropriate to the type of transparency that has been set.
[Postcard Printing]
Sets the print method when printing postcards.
[Use Secure Watermark Function of Device]/[Use Secure Printing Function of Device]
Embeds restriction and tracking information into the print data as a dot pattern. This is useful when printing confidential documents etc.
[Copy Set Numbering]
Prints serial numbers when printing multiple sets. This is a useful function when printing confidential documents etc.
[Advanced Settings]
Sets special print adjustment, the position to start printing, etc.
[Image Special Process]
Set this when printing dark letters or when the central parts of lines are not printed.
[Level 2] performs special processing of images at a higher level than [Level 1].
[Fixing Mode]
Improves the fixing state of toner. Try the settings in order, starting with [Mode 1].
[Blurry Image Correction]/[Special Print Adjustment]/[Special Print Adjustment A]
Thins out the dots when printing. Try the settings in order, starting with [Mode 1].
[Special Print Adjustment B]
Prints with high toner fixing. Try the settings in order, starting with [Mode 1].
[Quiet Mode]/[Special Print Adjustment C]
Slows down the printing speed to improve printing conditions.
[Special Print Mode (Plain Paper)]/[Special Print Adjustment V]
Corrects paper curling when using plain paper.
[Special Smoothing Mode]
Corrects the contours of characters and lines, and smoothes gradations.
[Printer Default]: Follows the device setting.
[Mode 1]: Smoothes the contours of dark letters and lines.
[Mode 2]: Smoothes the contours of dark letters and halftones within lines.
[Mode 3]: Smoothes dark letters and lines over halftone backgrounds.
[Mode 4]: Smoothes the contours of various letters and lines.
[Mode 5]: Corrects non-uniformity in photographic images and halftone objects.
[Mode 6]: Smoothes print data as a whole.
[Small-size Curl Adjustment]
Adjusts the fixing temperature so that paper of smaller sizes does not curl due to heat.
[Curl Adjustment]
Corrects curling of paper due to the pressure applied during toner fixing.
[Wrinkle Adjustment]
Improves printing so that the paper does not wrinkle. Try [Mode 1] first. Depending on the printer model, [Mode 1] corrects wrinkles when printing with envelopes, and [Mode 2] when printing with paper whose edges are moist.
[Print Mixed Color/B&W Documents at High Speed]
Automatically switches between color and black-and-white when printing data containing a mixture of color and black-and-white pages.
[Increase Print Speed for Forms]
Improves the print result on long narrow pages such as report forms etc.
[Prevent Postcard Fogging]
If the printed image is entirely or partially fogged when printing to postcards, select [Mode 1]. If this does not solve the problem, you can select [Mode 2], but this may affect the printed image itself.
[Print Last Page in 1-sided in 2-sided Printing]
Prints faster than normal two-sided printing if the last page during two-sided printing is one-sided.
However, when performing two-sided printing on hole-punched paper, the orientation of the last page may be different to that of the other pages. If this is the case, cancel this setting.
[Print on Back with Special Mode in 2-sided Printing]
Processes the paper so that the other side of the paper does not wrinkle and the print result does not become pale in places when performing two-sided printing.
[Special Fine Line Processing]
Corrects thinly lined sections to thicken them during printing.
[Barcode Adjustment Mode]
Adjusts the line thickness when printing barcodes so that they are not blurred or broken.
[Offset the Position to Start Printing]
Prints with the start position for printing offset in the up and down or left and right directions. This is useful when the widths of the up, down, left and right margins are printed out of alignment or when using the booklet printing function.