Network

All the settings about the network are listed with short descriptions. Default settings are marked with a dagger ().
If <Network> is not displayed
If <Network> under <Interface Selection> is set to <Off>, <Network> is not displayed in the Setup menu. Interface Selection
Asterisks (*)
Settings marked with an asterisk (*) may not be displayed depending on the model you are using, options, or other setting items.
TCP/IP Settings
Mopria
Google Cloud Print
SMB
SNMP Settings
Spooler
Receive in Parallel
Wait Time at Startup
Remote UI Settings
 
Software Regist/Updt
Ethernet Driver
Sleep Mode Priority
IEEE802.1X
Address Filter
MAC Address
E-Mail Print Set.
Monitoring Service
Init. Network Set.

TCP/IP Settings

Specify settings for using the machine in a TCP/IP network, such as IP address settings.
IPv4 Settings
Specify settings for using the machine in an IPv4 network.
IPv4
Enable or disable IPv4 in the machine.
Off
On
IP Mode
Select how to set the IP address. Setting IPv4 Address
Auto
Manual
Protocol *
Select the protocol to use when <IP Mode> is set to <Auto>. If you set the selected protocol to <On>, the other two protocols are automatically set to <Off>. Setting IPv4 Address
Use DHCP
Off
On
Use BOOTP
Off
On
Use RARP
Off
On
Auto IP *
Select whether to automatically obtain an IP address. Specify <On> when <IP Mode> is set to <Auto>. Setting IPv4 Address
Off
On
IP Address Settings
Configure the IP address, which is used for identifying devices, such as computers and printers, on a TCP/IP network. Setting IPv4 Address
IP Address
0.0.0.0 to 255.255.255.255
Subnet Mask
0.0.0.0 to 255.255.255.255
Gateway Address
0.0.0.0 to 255.255.255.255
DNS
Specify settings for the server address of the Domain Name System (DNS), which provides a host name for IP address resolutions. Use / to move the cursor, and use the numeric keys to specify the address. Use the Remote UI to specify other settings for DNS. Configuring DNS
Primary Address
0.0.0.0 to 255.255.255.255
Secondary Address
0.0.0.0 to 255.255.255.255
mDNS Settings *
Specify settings for using DNS functions without DNS servers. Configuring DNS
mDNS
Off
On
mDNS Name *
When <mDNS> is set to <On>, set this item.
DHCP Option
When DHCP is enabled, select whether to acquire the host name and whether to perform dynamic update of the DNS using the DHCP options.
Acquire Host Name
Off
On
DNS Dynamic Update
Off
On
IPv6 Settings
Select whether to use the machine in an IPv6 network. Use the Remote UI to specify the IPv6 address settings. Setting IPv6 Addresses
IPv6
Enable or disable IPv6 in the machine.
Off
On
mDNS Settings *
Specify settings for using DNS functions without DNS servers. Configuring DNS
mDNS
Off
On
Use IPv4 Name (mDNS) *
Off
On
mDNS Name *
When <Use IPv4 Name (mDNS)> is set to <Off>, set this item.
WINS Resolution
Select whether to use Windows Internet Name Service (WINS), which provides a NetBIOS name for IP address resolutions in a mixed network environment of NetBIOS and TCP/IP. Use the Remote UI to specify detailed settings that are applied when WINS is enabled. Configuring WINS
Off
On
FTP
Select whether to change the settings for printing and those configured in the machine from FTP.
FTP Print
Select whether to print from FTP. Use the Remote UI to set the user name and password that are used to print from FTP. Preparing for Using the FTP Server
Off
On
Allow Set. via FTP
Select whether to change the settings configured in the machine from FTP.
Off
On
LPD Settings
Enable or disable LPD, a printing protocol that can be used on any hardware platform or operating system. Also, set the time period after which the print job automatically ends when print data cannot be received due to a communication error or some other problem. Use the Remote UI to specify settings for banner page printing when LPD is enabled. Configuring Printing Protocols and WSD Functions
LPD Print
Off
On
RX Timeout *
1 to 60 (min.)
RAW Settings
Enable or disable RAW, a Windows specific printing protocol. Also, set the time period after which the print job automatically ends when print data cannot be received due to a communication error or some other problem. Use the Remote UI to specify settings for bidirectional communication.Configuring Printing Protocols and WSD Functions
RAW Print
Off
On
RX Timeout *
1 to 60 (min.)
IPP Print
Enable or disable IPP, which enables printing from an external network via Internet. Use the Remote UI to specify settings for TLS encryption of data to send and user authentication. Configuring Printing Protocols and WSD Functions
Off
On
WSD
Enable or disable automatic browsing and acquiring information for the machine by using the WSD protocol. Configuring Printing Protocols and WSD Functions
WSD Print
Select whether to print with the machine by using WSD.
Off
On
WSD Browsing *
Select whether to acquire information of the machine from a computer by using WSD. If <WSD Print> is set to <On>, <WSD Browsing> is fixed to <On> and is not displayed in the setting menu.
Off
On
Multicast Discovery
Select whether to set the machine to reply to multicast discovery messages.
Off
On
If <Multicast Discovery> is set to <Off>, the machine stays in sleep mode even when multicast discovery messages are flowing on the network.
HTTP
Enable or disable HTTP. HTTP is required for communications with a computer, such as when using the Remote UI and performing WSD printing. Disabling HTTP Communication
Off
On
Proxy Settings
Specify settings for using the proxy server that relays HTTP communications. Setting a Proxy
Proxy
Enable or disable the proxy server when the machine performs HTTP communications.
Off
On
Server Address *
Set the address of the proxy server to use. Specify the IP address, domain name, and other necessary information that suit your operational environment. Use / to move the cursor, and use the numeric keys to enter the address (Entering Text).
Port Number *
Specify the port number of the proxy server to use.
1 to 80 to 65535
Same Domain *
Enable or disable the proxy server even for performing HTTP communications with devices in the same domain.
Use Proxy
Do Not Use Proxy
Proxy Authentication *
Enable or disable the authentication function of the proxy server.
Off
On
User Name *
To enable the proxy authentication, enter up to 24 alphanumeric characters for the user name to authenticate. Use the numeric keys to enter the user name. (Entering Text)
Password *
To set the password for the proxy authentication, enter up to 24 alphanumeric characters. Use the numeric keys to enter the password. (Entering Text)
SNTP
Select whether to acquire time from a network time server. Use the Remote UI to specify the server address settings. Configuring SNTP
Off
On
Discovery Response
Select whether to set the machine to respond to multicast discovery packets on the network. Use the Remote UI to specify the scope name that is used to include the machine into a specific scope. Configuring Settings for Device Management Software
Off
On
IPSec
Select whether to perform encrypted communication by establishing a virtual private network (VPN) via IPSec. Use the Remote UI to register and specify the security policies. Configuring IPSec Settings
Off
On
Sleep Notif. Set.
Specify settings for SLP communication to notify imageWARE of the power status of the machine. If you set <Sleep Mode Notif.> to <On>, you can expect the machine to avoid unnecessary communication during sleep mode and reduce the total power consumption. Configuring Settings for Device Management Software
Sleep Mode Notif.
Enable or disable SLP communication. If you select <On>, the power status of the machine is notified to imageWARE.
Off
On
Port Number *
Enter the port number for SLP communications with management software.
1 to 11427 to 65535
Routers to Traverse *
Specify how many routers the notification packets can pass.
0 to 3 to 254
Notif. Interval *
Specify how often the machine notifies imageWARE of its power status.
60 to 600 to 65535

Mopria

Select whether to use Mopria®. Printing by Mopria®
Off
On

Google Cloud Print

Enable or disable Google Cloud Print. Changing Google Cloud Print Settings
Use Cloud Print
Off
On
Registration Status

SMB *

Select whether to use the machine as a shared printer on the SMB network. Use the Remote UI to specify other SMB settings including the server name and the workgroup name. Configuring SMB
SMB Server
Select whether to display the machine as an SMB Server on the SMB network configuration screen.
Off
On
SMB Print *
Enable or disable SMB Print.
Off
On

SNMP Settings

Specify the settings for monitoring and controlling the machine from a computer running SNMP-compatible software. Monitoring and Controlling the Machine with SNMP
SNMPv1 Settings
Specify settings for using SNMPv1. Use the Remote UI to specify a community name and access privileges to Management Information Base (MIB) objects.
SNMPv1
Enable or disable SNMPv1.
Off
On
Dctd. Community Set.
Dedicated Community is a preset community, intended exclusively for administrators using Canon software, such as iW Management Console. Select the access privilege to Management Information Base (MIB) objects.
Dctd. Community
Off
Read/Write
Read Only
SNMPv3 Settings
Specify settings for using SNMPv3. Use the Remote UI to specify detailed settings that are applied when SNMPv3 is enabled.
SNMPv3
Enable or disable SNMPv3.
Off
On
User Settings N (N=1, 2, 3, 4, 5) *
Specify the authentication password and encryption password as the user information used on SNMPv3. Use the Remote UI to register the user information. Monitoring and Controlling the Machine with SNMP
Auth. Password/Encryption Password
Enter 6 to 16 alphanumeric characters for each password. Use the numeric keys to enter the password.
Rjct Packet in Sleep
Select whether to discard SNMP packets received during sleep mode.
Off
On
If you select <On>, applications that use the SNMP protocol, such as Canon software imageWARE Series, may be disabled to access the machine.

Spooler *

Select whether to include the SD card in the storage locations of received print data. If you select <On>, the machine capacity of receiving print data is increased.
Off
On

Receive in Parallel

Specifies whether to print jobs in the order received when print data for several jobs are sent to the printer from one computer. If you select <Off>, jobs are printed in the order received but printing speed may be slower.
Off
On
Even if you select <Off>, jobs may not be saved in the order received in some cases, for example when the Stored Job Print function is being executed.

Wait Time at Startup

Specify a wait time for connecting to a network. Select the setting depending on the network environment. Setting a Wait Time for Connecting to a Network
0 to 300 (sec.)

Remote UI Settings

Specify settings for using the Remote UI. You can use the Remote UI to specify settings for the machine from a Web browser.
Remote UI
Enable or disable the Remote UI. Disabling Remote UI
Off
On
RUI Access Sec. Set.
Set a PIN of up to 7 digits for access to the Remote UI. All users use a common PIN. Setting a Remote UI PIN
Off
 
On
Remote UI Access PIN
TLS *
Enable or disable TLS for Remote UI communications. To use TLS for encrypted communications, you need to set key pairs by using the Remote UI (Using TLS for Encrypted Communications), respectively.
Off
On

Software Regist/Updt *

When you register or update a MEAP application, you can check for communication with a distribution server to connect to.
Software Mngt. Set.
Communication Test

Ethernet Driver

Specify the Ethernet communication mode (half duplex/full duplex) and Ethernet type (10 Base-T/100 Base-TX/1000 Base-T). Configuring Ethernet Settings
Auto Detect
Select whether to automatically detect or manually select the communication mode and the Ethernet type.
Off
On
Communication Mode *
If <Auto Detect> is set to <Off>, select the Ethernet communication mode.
Half Duplex
Full Duplex
Ethernet Type *
If <Auto Detect> is set to <Off>, select the Ethernet type.
10 Base-T
100 Base-TX
1000 Base-T

Sleep Mode Priority

Select whether to give priority to rapid returning from sleep mode or greater energy saving effect of sleep mode.
Optimal Balance
Exit Speed
Energy Saving
This item is available when <Sleep Mode> is set to <High (Deep Sleep)>. Entering Sleep Mode

IEEE802.1X

Enable or disable IEEE 802.1X authentication. Use the Remote UI to specify detailed settings that are applied when IEEE802.1X authentication is enabled. Configuring IEEE 802.1X Authentication
Off
On

Address Filter

Enable or disable communication restricted with the IP address and MAC address. Use the Remote UI to specify the address to restrict. Restricting Communication by Using Firewalls
Off
On

MAC Address

Check the MAC address of the machine, which is a number unique to each communication device.
(Display only)

E-Mail Print Set.

Specify settings for using the E-Mail Print function. Use the Remote UI to specify other settings for E-Mail Print including the mail server settings. Printing Received E-mail (E-Mail Print)
POP3 RX Interval
Specify the interval for automatically connecting to the mail server in minutes. New e-mails in the mailbox of the mail server are automatically received and printed at the specified time intervals.
0 to 90 (min.)
If you select "0," e-mails are not automatically received. In this case, receive e-mails manually. Manually Receiving E-Mails
POP3 RX
Enable or disable E-Mail Print for the POP3 mail server.
Off
On
SMTP RX
Enable or disable E-Mail Print for the SMTP protocol.
Off
On

Monitoring Service

Enable communication with a remote monitoring server and display of communication logs.
Comm. Test
Enable communication with a remote monitoring server. Execution of this item enables information about the machine to be periodically sent to the remote monitoring server connected to the machine.
Comm. Log
Display communication logs including error information generated with <Comm. Test>.
(Display only)

Init. Network Set.

Select to return the Network Settings to the factory defaults. Initializing the Network Settings
5XRS-04F