Check the location of the paper jam on the touch panel display, and remove it. Paper jam locations are indicated by numbers such as F-A1 or F-B1, which are shown in the illustration below. The Staple Finisher-X is optional. Optional Equipment
* Entrance guide
Confirm before handling
Close any covers that are open.
1
Open the front cover of the finisher.
2
If the Puncher Unit-BF or Puncher Unit-BG (for the 230 V machine only) is attached, slide the guide (F-A1) to align it with the mark.
* Slide the guide in or out to align the nearest with the mark ().
3
Open the guide (F-A2).
4
Check whether paper is jammed.
If paper is jammed, gently pull it out in the direction of the arrow.
Close the guide (F-A2).
5
Open the guide (F-B1).
6
Check whether paper is jammed.
If paper is jammed, gently pull it out in the direction of the arrow.
Close the guide (F-B1).
7
Turn the dial (F-B2) in the direction of the arrow.
8
Check whether paper is jammed in the guide (F-B3).
Open the guide (F-B3).
If paper is jammed, gently pull it out in the direction of the arrow.
Close the guide (F-B3).
9
Close the front cover of the finisher.
Continue following the instructions on the screen to proceed with the interrupted operation or continue clearing paper jams.
This site uses cookies to provide its contents and functions and improve their qualities etc. You can find out more about our use of the cookies here. If you select "Reject", only cookies necessary to provide the contents and functions of the site are recorded and stored.