Procedure for Configuring the Local Device Authentication Settings
To use local device authentication, configure the settings using the following procedure:
Step 1 | Check that the login service is set to User Authentication. |
Step 2 | Register the user information. |
Step 3 | Specify the login method and authentication system, and start user authentication. Configure the login screen display method and applicable range of user authentication, as needed. Disable the personalization function if not needed. |
Step 4 | When you use User Authentication for printing, scanning, and sending faxes from a computer, configure the user information for each computer using the machine. |
When Using Department ID Management
After configuring the above settings, you must configure the system manager information settings, register and specify the Department ID, and then enable Department ID Management. Department ID Management Procedure