Settings/Registration] 
[Function Settings] [Printer][Printer]
Configure the settings for the printer.
* Values in red text indicate the default setting for each item.
[ Settings/Registration] [Function Settings] [Printer]
Settings/Registration] [Function Settings] [Printer]Print the Personality settings, font list, and other details. Printing the Registration Information and Settings
[PCL]*1 [Configuration Page] [Font List] [PS]*1 [Configuration Page] [Font List] [RGB Test Page] [CMYK Test Page] [RGB Color Chart] [CMYK Color Chart] |
*1This item may not be displayed depending on the installed option and other settings.
[ Settings/Registration] [Function Settings] [Printer]
Settings/Registration] [Function Settings] [Printer]Configure the settings related to the specifications of the printer functions, or initialize the printer function settings.
[ Settings/Registration] [Function Settings] [Printer]
Settings/Registration] [Function Settings] [Printer]Set whether to restrict printing from the printer driver. Prohibiting Printing from a Computer
[On], [Off] [Select Jobs to Allow] [Reserved Jobs] |
[ Settings/Registration] [Function Settings] [Printer]
Settings/Registration] [Function Settings] [Printer]Set the type of Page Description Language device that the machine is detected as being, when a computer is connected to the machine.
[UFR II], [PCL6]*1, [PS3]*1, [Fax]*1 |
*1This item may not be displayed depending on the installed option and other settings.
[ Settings/Registration] [Function Settings] [Printer]
Settings/Registration] [Function Settings] [Printer]Set whether to give priority to the paper settings of the printer driver or the paper settings of the machine when you print from the multi-purpose tray.
When you give priority to the paper settings of the printer driver, priority is given to the paper size and type settings. If you want to give priority only to the paper type, select [Prioritize Paper Type Only] in [Mode A (Prioritize Printer Driver Settings)].
To give priority to the paper settings of the machine, select either of the settings described below, depending on the operation to be performed when Free Size is set for the multi-purpose tray.
When you give priority to the paper settings of the printer driver, priority is given to the paper size and type settings. If you want to give priority only to the paper type, select [Prioritize Paper Type Only] in [Mode A (Prioritize Printer Driver Settings)].
To give priority to the paper settings of the machine, select either of the settings described below, depending on the operation to be performed when Free Size is set for the multi-purpose tray.
Select [Mode B (Flexible If Free Is Size Selected)] to enable the machine to feed both standard and custom size paper.
Select [Mode C (Feed Only If Paper Settings Match)] to enable the machine to feed only custom size paper.
[Mode A (Prioritize Printer Driver Settings)] [Prioritize Paper Type Only] [Mode B (Flexible If Free Is Size Selected)] [Mode C (Feed Only If Paper Settings Match)] |
IMPORTANT
When [Mode A (Prioritize Printer Driver Settings)] Is Selected
If the paper loaded in the multi-purpose tray does not match the paper settings of the printer driver, a paper jam or printing error may occur.
When you set Free Size for the multi-purpose tray, specify the paper type in the printer driver. If you do not specify the paper type, printing may not be performed, or a paper jam or printing error may occur.
NOTE
An error message appears if the paper size specified in the printer driver differs significantly from the size of paper loaded in the multi-purpose tray.
[ Settings/Registration] [Function Settings] [Printer]
Settings/Registration] [Function Settings] [Printer]Set the envelope flap length when you print on Nagagata 3 and Nagagata 4 envelopes from the multi-purpose tray according to the printer driver settings. This setting is enabled when envelopes are loaded vertically in the multi-purpose tray.
* You can change this setting if [Paper Feed Mode for Printer Driver Jobs with MP Tray] is set to [Mode A (Prioritize Printer Driver Settings)]. [Paper Feed Mode for Printer Driver Jobs with MP Tray]
0.0 to 30.0 (mm) |
[ Settings/Registration] [Function Settings] [Printer]
Settings/Registration] [Function Settings] [Printer]Configure the settings for the password that is entered when using PS printer control commands.
[SystemParamsPassword] [StartJobPassword] |
NOTE
[SystemParamsPassword] is a password that allows changes to the system parameters, and [StartJobPassword] is a password that allows the startjob and exitserver operators to be performed. For details, see the PostScript language specifications.
[ Settings/Registration] [Function Settings] [Printer]
Settings/Registration] [Function Settings] [Printer]Register frequently used print settings, such as the paper type and 2-sided printing settings, as a virtual printer. Preparing to Use a Virtual Printer
* This item can only be configured using Remote UI.
[ Settings/Registration] [Function Settings] [Printer]
Settings/Registration] [Function Settings] [Printer]Register IPP print settings as presets. Registering the IPP Print Settings
* This item can only be configured using Remote UI.
[ Settings/Registration] [Function Settings] [Printer]
Settings/Registration] [Function Settings] [Printer]You can add a "hot folder," which enables printing simply by copying a file, to a shared folder in the Advanced Box on the machine. Adding a Hot Folder
* This item can only be configured using Remote UI.
[ Settings/Registration] [Function Settings] [Printer]
Settings/Registration] [Function Settings] [Printer]Set the mode for using the PaperSource command with PCL5.
The PaperSource command specifications are shown in the table below.
The PaperSource command specifications are shown in the table below.
Paper Source | Mode 0 | Mode 1 | Mode 2 |
Auto | {ec}&l7H | {ec}&l7H | {ec}&l7H |
Manual Feed | {ec}&l2H | {ec}&l2H | {ec}&l2H |
Multi-Purpose Tray | {ec}&l4H | {ec}&l8H | |
Cassette 1 or Right Deck | {ec}&l1H | {ec}&l1H | {ec}&l1H |
Cassette 2 or Left Deck | {ec}&l5H | {ec}&l4H | {ec}&l4H |
Cassette 3 | {ec}&l8H or {ec}&l20H | {ec}&l5H | {ec}&l5H or {ec}&l8H |
Cassette 4 | {ec}&l9H or {ec}&l21H | {ec}&l20H | {ec}&l9H or {ec}&l20H |
Cassette 5 | {ec}&l10H or {ec}&l23H | {ec}&l21H | |
Optional Deck | {ec}&l22H | {ec}&l21H |
* This table includes some paper sources that may not be available depending on the model.
* If a PaperSource command not included in the table is specified, "Auto" is selected for the paper source.
[Mode 0], [Mode 1], [Mode 2] |
[ Settings/Registration] [Function Settings] [Printer]
Settings/Registration] [Function Settings] [Printer]Set whether to use JDF when printing.
When [Store JDF Jobs in Hold] is set to [On], the machine temporarily holds the JDF print data without printing it immediately.
When [Store JDF Jobs in Hold] is set to [On], the machine temporarily holds the JDF print data without printing it immediately.
[On], [Off] [Store JDF Jobs in Hold] [On], [Off] |
NOTE
For details on how to create JDF and JMF files and send them to the printer, see the JDF File Customization Manual.