Monitoring Preparation

To monitor the status of the printer or its printer/fax jobs using Desktop Browser, Printer Monitor, or Quick Printing Tool, the device must be configured as a monitoring target in Desktop Monitor Setup.
To configure a device to be monitored, create an application-enabled port of the printer.
When the standard TCP/IP port are specified to the printer that prints/faxes, it is possible to automatically respecify the application-enabled port with the same IP address to the printer.
By selecting the appropriate check box in the [imageRUNNER ADVANCE Desktop Quick Printing Tool Settings] dialog box, the port is automatically changed to an application-enabled port.
Configuring the Print/Fax Send Job Status Display Settings
Configuring the Device Status Display
You can change the properties of the printer and the port. For more information, see the following.
Preparing Printer/Fax Monitoring in Desktop Monitor Setup
Note
For more information on how to specify a new application-enabled port, see the following.
Creating Ports
For more information on how to convert between the standard TCP/IP port and the application-enabled port, see the following.
Selecting the Printer Port Auto-Convert Method
For more information on how to change the properties of the printer, see the following.
Editing Printer Settings
For more information on how to change the properties of the port, see the following.
Editing Port Settings
In addition, refer to the following as necessary.
Cautions and Restrictions