اقدام مناسب برای هر پیام

Cannot change the destination type of any destination that is registered to a group.

Cannot connect using Direct Connection.

Cannot connect using Direct Connection. Check the network connection.

Cannot find the access point.

Cannot print RX data.

Cannot receive the fax. Make sure the fax was sent correctly by the sender.

Cannot send because more than one destination is specified.

Cannot specify a group.

Cannot use Google Cloud Print. Server authentication failed.

Cannot use Google Cloud Print. Server communication error.

Cannot use these settings. Sending to the specified destination is restricted.

Check the authentication settings.

Copying is restricted.

Could not connect.

Could not connect.

Could not connect. Check the PSK settings.

Could not connect using the wireless LAN. Turn the main power OFF and ON, then configure the settings again.

Could not connect using WPS. Wait a moment, then configure the settings again.

Could not detect any connections from wireless devices.

Could not perform cleaning.

Could not perform Open System authentication. Check the WEP settings.

Could not perform Shared Key authentication. Check the WEP settings.

Direct Connection terminated.

Direct Connection terminated. Check the network connection.

Easy Connection via PC ended because the session timed out.

Faxing is restricted.

Insert the drum unit.

Maximum number of wireless devices connected using Direct Connection has been reached. To connect other devices, terminate some of the current connections.

No Paper: XXXX*

No reply from the destination.

No response from the host.

Paper jammed.

Paper Size & Settings Mismatch

Prepare the toner cartridge.

Remote scanning is restricted.

Replace the toner cartridge.

Scanning is restricted.

Set the correct authentication information.

Specifying and registering new destinations is restricted.

The computer is restricted.

The connection with the PC has been lost. Check the connection.

The memory is full.

The memory is full. Process secure print jobs.

The memory is full. Scanning will be canceled. Do you want to print?

The number of entered characters is incorrect or invalid characters are used.

The WEP key is not set correctly. Check the WEP settings.

Turn the main power OFF and ON. If the device does not recover, contact your dealer or service representative.

Turn the main power OFF and ON. If the problem persists, change the drum unit.

Use Remote UI to set the information necessary for authentication.

3Y79-08E