Front Side

USB port (for USB devices) (front side of the main unit)
You can connect a commercial USB memory device or USB keyboard.
* Supports USB 2.0.

Control panel
Use the touch panel display to operate the machine and check its status.
Control Panel
Toner replacement cover
Open this cover when replacing the toner cartridge.
Replacing the Toner Cartridges
Front cover of the main unit

Glass cleaning cloth storage receptacle
Stores the glass cleaning cloth.

Platen glass
Place books, thick paper, thin paper, and other originals that cannot be placed in the feeder on the platen glass. Placed originals are scanned in a stationary state.
Placing Originals
Feeder
You can place several sheets of originals in the feeder. Placed originals are fed and scanned one by one automatically.
2-Sided Single Pass Feeder
Power switch
Turn ON and OFF the power of the machine.
Turning ON and OFF the Machine
Front-left cover
Open this cover when a paper jam occurs or when replacing the waste toner container.

Paper deck 1 and paper deck 2
Load frequently used paper.
Paper Deck and Drawer
Paper drawer
Load frequently used paper. You can also load paper of a size that cannot be loaded in the paper decks.
Paper Deck and Drawer
Toner Code
This code indicates the type of genuine toner that can be used with the machine. Use toner with a code that includes the same letters as the code on the front cover of the machine.

Right cover of the main unit
Open the cover when a paper jam occurs.

Multi-purpose Tray
To temporarily use paper not loaded in the paper drawer, load it in the multi-purpose tray.
Multi-Purpose Tray
Ventilation slots
Air inside the machine is released through the ventilation slots to cool down the inside of the machine.
Do not place objects next to the ventilation slots, as this can prevent ventilation.
IMPORTANT
If you connect a device that exceeds the following power supply capacity provided by the machine to the USB port (for USB devices), the machine may be damaged.
Front right side: 5 V 500 mA
Rear right side: 5 V 900 mA
Do not forcefully push the feeder to close when placing a book, magazine, or other thick original on the platen glass.
NOTE
For details about the configuration of the machine when options are installed and the part names of the optional equipment units, see the following.
To ensure efficient use of the machine, clean the surface of the machine and platen glass regularly.
Originals become dirty
Originals frequently jam
Printouts appear smudged after scanning, copying, or sending faxes
Original size is not detected correctly