Setting Menu List

This section describes the menu items that can be set using the Remote UI. Default settings are marked with a dagger ().
[Preferences] Menu
 
[Adjustment/Maintenance] Menu
 
[System Management Settings] Menu

Display Settings

Select the display language used for the Remote UI screens.
Remote UI Language
Chinese (Simplified)
English
French
German
Italian
Japanese
Spanish
 

Timer Settings

Make settings related to time, such as the time zone.
Time Zone
UTC-12:00 to UTC 0:00 to UTC+12:00
Use Daylight Saving Time
Off
On
Start
January to March to December
1st to Last
Monday to Sunday
End
January to October to December
1st to Last
Monday to Sunday
Auto Sleep Time
Off
After 1 minute
After 5 minutes
After 10 minutes
After 15 minutes
After 30 minutes
After 60 minutes
Auto Shutdown Time
Off
After 1 hour
After 2 hours
After 3 hours
After 4 hours
After 5 hours
After 6 hours
After 7 hours
After 8 hours
 

Utility Menu

You can clean the fixing unit inside the machine.
Cleaning
Clean the fixing unit if black spots or streaks appear on printouts. Note that you cannot clean the fixing unit when the machine has documents waiting to be printed. To clean the fixing unit, you need plain A4 size paper. Before starting, load A4 size paper in the multi-purpose tray. (Loading Paper in the Multi-Purpose Tray)
 

System Management

You can specify that a PIN (system manager password) is required when logging in to the Remote UI in System Manager Mode, and you can register information about the system manager, such as name and contact information. You can also register a name to identify this machine, and register its location.
System Manager Information
System Manager PIN
System Manager Name
Contact Information
E-Mail Address
System Manager Comment
Device Information
Device Name
Location
Support Link
 

Security Settings

Enable or disable encrypted communication via SSL and IP address packet filtering.
Remote UI Settings
Select whether to use SSL encrypted communication. Enabling SSL Encrypted Communication for the Remote UI
Use SSL
Off
On
Key and Certificate Settings
Register key pairs, or generate them on the machine. You can check and verify registered key pairs. Configuring Settings for Key Pairs and Digital Certificates
CA Certificate Settings
Register a CA certificate. One CA certificate is preinstalled. You can check and verify registered CA certificates. Configuring Settings for Key Pairs and Digital Certificates
IP Address Filter
Specify whether to allow or reject packets sent to or received from devices with specified IP addresses.
IPv4 Address: Outbound Filter
Do not allow the machine to send data to a computer with a specified IPv4 address. Restricting Communication by Using Firewalls
Use Filter
Off
On
Default Policy
Reject
Allow
IPv4 Address: Inbound Filter
Reject data received by the machine from a computer with a specified IPv4 address. Restricting Communication by Using Firewalls
Use Filter
Off
On
Default Policy
Reject
Allow
IPv6 Address: Outbound Filter
Do not allow the machine to send data to a computer with a specified IPv6 address. Restricting Communication by Using Firewalls
Use Filter
Off
On
Default Policy
Reject
Allow
IPv6 Address: Inbound Filter
Reject data received by the machine from a computer with a specified IPv4 address. Restricting Communication by Using Firewalls
Use Filter
Off
On
Default Policy
Reject
Allow
 

Network Settings

Make settings related to network functions.
TCP/IP Settings
Specify settings for using the machine in a TCP/IP network, such as IP address settings.
IPv4 Settings
Specify settings for using the machine in an IPv4 network. Setting IPv4 Address  Configuring DNS
IP Address Settings
Auto Acquire
Select Protocol
Off
DHCP
BOOTP
RARP
Auto IP
On
Off
IP Address
Subnet Mask
Gateway Address
DNS Settings
Primary DNS Server Address
Secondary DNS Server Address
Host Name
Domain Name
DNS Dynamic Update
Off
On
DNS Dynamic Update Interval: 0 to 24 to 48 (hours)
mDNS Settings
Use mDNS
Off
On
mDNS Name
DHCP Option Settings
Acquire Host Name
Off
On
DNS Dynamic Update
Off
On
IPv6 Settings
Specify settings for using the machine in an IPv6 network. Setting IPv6 Addresses  Configuring DNS
IP Address Settings
Use IPv6
Off
On
Stateless Address
Off
On
Use Manual Address
Off
On
IP Address
Prefix Length: 0 to 64 to 128
Default Router Address
Use DHCPv6
Off
On
DNS Settings
Primary DNS Server Address
Secondary DNS Server Address
Use Same Host Name/Domain Name as IPv4
Off
On
Host Name
Domain Name
DNS Dynamic Update
Off
On
Register Manual Address
Off
On
Register Stateful Address
Off
On
Register Stateless Address
Off
On
DNS Dynamic Update Interval: 0 to 24 to 48 (hours)
mDNS Settings
Use mDNS
Off
On
Use Same mDNS Name as IPv4
Off
On
mDNS Name
WINS Settings
Specify settings for Windows Internet Name Service (WINS), which provides a NetBIOS name for IP address resolutions in a mixed network environment of NetBIOS and TCP/IP. Configuring WINS
WINS Resolution
Off
On
WINS Server Address
Scope ID
LPD Print Settings
Enable or disable LPD, a printing protocol that can be used on any hardware platform or operating system. Configuring Printing Protocols and Web Services
Use LPD Printing
Off
On
NetBIOS Settings
Set a NetBIOS name and a workgroup name, which must be set to register this machine with a WINS server. Configuring NetBIOS
NetBIOS Name
Workgroup Name
RAW Print Settings
Enable or disable RAW, a Windows specific printing protocol. Configuring Printing Protocols and Web Services
Use RAW Printing
Off
On
WSD Settings
Enable or disable automatic browsing and acquiring information for the machine by using the WSD protocol that is available on Windows Vista/7/8/Server 2008/Server 2012. Configuring Printing Protocols and Web Services
Use WSD Printing
Off
On
Use WSD Browsing
Off
On
Use Multicast Discovery
Off
On
SSL Settings
Specify the key pair to use when conducting SSL encrypted communication with the Remote UI. Enabling SSL Encrypted Communication for the Remote UI
Multicast Discovery Settings
Specify whether the machine should respond to discovery packets when multicast discovery is performed on the network using Service Location Protocol (SLP). Configuring SLP Communication with imageWARE
Respond to Discovery
Off
On
Scope Name
Port Number Settings
Change port numbers for protocols according to your network environment. Changing Port Numbers
LPD
1 to 515 to 65535
RAW
1 to 9100 to 65535
HTTP
1 to 80 to 65535
SNMP
1 to 161 to 65535
WSD Multicast Discovery
1 to 3702 to 65535
Multicast Discovery
1 to 427 to 65535
MTU Size Settings
Select the maximum size of packets the machine sends or receives. Changing the Maximum Transmission Unit
MTU Size
1300
1400
1500
SNTP Settings
Specify whether to acquire the time from a time server on the network. Configuring SNTP
Use SNTP
Off
On
NTP Server Name
Polling Interval: 1 to 24 to 48 (hours)
SNMP Settings
Specify the settings for monitoring and controlling the machine from a computer running SNMP-compatible software. Monitoring and Controlling the Machine with SNMP
SNMPv1 Settings
Use SNMPv1
Off
On
Community Name 1
MIB Access Permission 1
Read/Write
Read Only
Community Name 2
MIB Access Permission 2
Read/Write
Read Only
Dedicated Community Settings
Off
Read/Write
Read Only
SNMPv3 Settings
Use SNMPv3
Off
On
User Settings 1/User Settings 2/User Settings 3
Context Settings
Printer Management Information Acquisition Settings
Acquire Printer Management Information from Host
Off
On
Dedicated Port Settings
Enable or disable the dedicated port. The dedicated port is used when using the Printer Status Window to make machine settings and acquire information about the machine.
Use Dedicated Port
Off
On
Waiting Time for Connection at Startup
Specify a wait time for connecting to a network. Select the setting depending on your network environment. Setting a Wait Time for Connecting to a Network
Waiting Time
0 to 300 (seconds)
Wireless LAN Settings
You can check wireless LAN settings and status information. Wireless LAN settings cannot be changed from the Remote UI. Make wireless LAN settings from the computer using the MF/LBP Network Setup Tool. (Connecting to a Wireless LAN)
 

Initialize Setting Information

Initializes settings and returns the machine to the factory default state.
Initialize Menu
Returns the settings in the [Preferences] Menu to the factory default settings. Initializing Preferences Settings
Initialize System Management Settings
Returns the settings in the [System Management Settings] Menu to the factory default settings. Initializing System Management Settings
Initialize Key and Certificate
Returns key and certificate settings to the factory default settings. Initializing Key and Certificate Settings
0HWJ-039