Settings marked with "*1" cannot be imported or exported.
Settings marked with "*2" may not be displayed depending on the model you are using, options, or other setting items.
<Select Wired/Wireless LAN>
When switching the machine from Wireless LAN to Wired LAN, you need to specify the setting. Conversely, when switching the machine from Wired LAN to Wireless LAN, you do not need to specify this setting (You can switch using the following <Wireless LAN Settings>). Selecting Wired LAN or Wireless LAN
<Wired LAN>
<Wireless LAN>
<Wireless LAN Settings>
Wireless LAN routers that can access the machine are automatically located, so you can select from the list. You must manually enter a network key, such as a WEP key or a PSK. Setting Up Connection by Selecting a Wireless Router
<Other Connections>
Select to configure the settings your wireless router is equipped with Wi-Fi Protected Setup (WPS) or you want to manually specify authentication and encryption settings.
<Manually Enter Network Name>
Select to configure a wireless connection by manually entering the network name. By using this method, you can specify authentication and encryption settings in detail. Setting Up Connection by Specifying Detailed Settings
Set whether to connect directly. By enabling this function, connecting directly with the machine is possible even in an environment without an access point or wireless LAN router. Connecting Directly (Access Point Mode)
<Use Direct Connection>
<Off>
<On>
<Time Until Direct Connection Termination>
Specify the time to automatically disconnect after Direct Connection is established.
0 (Do not terminate session automatically)
1 to 60 (min.)
<Menu> <Preferences> <Network> <Direct Connection Settings> <Time Until Direct Connection Termination> Enter the time
<Access Point Mode Settings>
Configure the SSID/network key arbitrarily. If you want to connect multiple mobile devices to the machine at the same time, you need to configure both SSID and network key arbitrarily.
<Use Custom SSID>
<Off>
<On>
<SSID>
<Use Custom Network Key>
<Off>
<On>
<Network Key>
<Menu> <Preferences> <Network> <Direct Connection Settings> <Access Point Mode Settings> <Use Custom SSID>/<Use Custom Network Key> <On> Enter the SSID/network key <Apply>
<Keep Enabled If SSID/Ntwk Key Spcfd> *2
Specify whether to keep the machine waiting for Direct Connection.
<Off>
<On>
<Menu> <Preferences> <Network> <Direct Connection Settings> <Keep Enabled If SSID/Ntwk Key Spcfd> Select <Off> or <On> Restart the machine
When setting this item to <On>, configure in advance a custom SSID or network key using <Access Point Mode Settings>.
<Config. IP Address For Direct Conn.>
Manually enter the machine's IP address at the time of Direct Connection.
192.168.22.1
<Menu> <Preferences> <Network> <Direct Connection Settings> <Config. IP Address For Direct Conn.> Enter an arbitrary IP address
<Easy Connection via PC>
Start the procedure for Easy Connection via PC (cableless setup mode). You can use Canon Laser NW Device Setup Utility to configure network settings via a computer.
<Menu> <Preferences> <Network> <Easy Connection via PC> <Yes> () The connection process starts
Download Canon Laser NW Device Setup Utility from the Canon website (https://global.canon/).
<TCP/IP Settings>
Specify settings for using the machine in a TCP/IP network, such as IP address settings.
<IPv4 Settings>
Specify settings for using the machine in an IPv4 network.
<IP Address Settings>
Configure the IP address, which is used for identifying devices, such as computers and printers, on a TCP/IP network. Setting IPv4 Address
Specify settings for Domain Name System (DNS), which provides a host name for IP address resolutions. Configuring DNS
<DNS Server Settings>
<Primary DNS Server>: 0.0.0.0
<Secondary DNS Server>: 0.0.0.0
<DNS Host Name/Domain Name Settings>
<Host Name>
<Domain Name>
<DNS Dynamic Update Settings>
<Off>
<On>
<DNS Dyn. Updt. Intrvl.>
0 to 24 to 48 (hr.)
<mDNS Settings>
Specify settings for using DNS functions without DNS servers. Configuring DNS
<Off>
<On>
<mDNS Name>
<DHCP Option Settings>
If DHCP is enabled, use these settings to select whether to use the DHCP optional functions to acquire the DNS server address or the domain name. Configuring DNS
<Acquire Host Name>
<Off>
<On>
<DNS Dynamic Update>
<Off>
<On>
<Acquire DNS Server Address>
<Off>
<On>
<Acquire Domain Name>
<Off>
<On>
<Acquire WINS Server Address>
<Off>
<On>
<Acquire POP Server Address>
<Off>
<On>
<IPv6 Settings>
Specify settings for using the machine in an IPv6 network.
<Use IPv6>
Enable or disable IPv6 in the machine. You can also view the current settings. Setting IPv6 Addresses
Enable or disable the stateful address that is acquired via DHCPv6. Setting IPv6 Addresses
<Off>
<On>
<Check Settings>
<Stateful Address>
<Prefix Length>
<DNS Settings>
Specify settings for Domain Name System (DNS), which provides a host name for IP address resolutions. Configuring DNS
<DNS Host Name/Domain Name Settings>
<Use IPv4 Host/Domain>
<Off>
<Host Name>
<Domain Name>
<On>
<DNS Dynamic Update Settings>
<Off>
<On>
<Regist. Manual Addr.>
<Off>
<On>
<Regist. Stateful Addr.>
<Off>
<On>
<Regist Stateless Addr.>
<Off>
<On>
<DNS Dynamic Update Interval>
0 to 24 to 48 (hr.)
<mDNS Settings>
Specify settings for using DNS functions without DNS servers. Configuring DNS
<Off>
<On>
<Use IPv4 Name for mDNS>
<Off>
<mDNS Name>
<On>
<DHCP Option Settings>
If DHCP is enabled, use these settings to select whether to use the DHCP optional functions to acquire the DNS server address or the domain name. Configuring DNS
<Acquire DNS Server Address>
<Off>
<On>
<Acquire Domain Name>
<Off>
<On>
<WINS Settings>
Specify settings for Windows Internet Name Service (WINS), which provides a computer name for IP address resolutions in a mixed network environment of NetBIOS and TCP/IP. Configuring WINS
<WINS Resolution>
<Off>
<On>
<WINS Server Address>: 0.0.0.0
<LPD Settings>
Enable or disable LPD, a printing protocol that can be used on any hardware platform or operating system. You can also set the reception timeout period after which printing is canceled if print data reception is interrupted. Configuring Printing Protocols and WSD Functions
<LPD Print Settings>
<Off>
<On>
<RX Timeout>
1 to 5 to 60 (min.)
<RAW Settings>
Enable or disable RAW, a Windows specific printing protocol. You can also set the reception timeout period after which printing is canceled if print data reception is interrupted. Configuring Printing Protocols and WSD Functions
Enable or disable HTTP, which is required for communications with a computer, such as when using the Remote UI or WSD printing. Disabling HTTP Communication
<Off>
<On>
<Use IPSec> *1
Select whether to perform encrypted communication by establishing a virtual private network (VPN) via IPSec. Configuring IPSec Settings
<Off>
<On>
<Menu> <Preferences> <Network> <TCP/IP Settings> <Use IPSec> Select <Off> or <On> Restart the machine
<Port Number Settings>
Change port numbers for protocols according to the network environment. Changing Port Numbers
Enable or disable SNMPv1. When enabling SNMPv1, specify a community name and access privileges to Management Information Base (MIB) objects.
<Off>
<On>
<Menu> <Preferences> <Network> <SNMP Settings> <SNMPv1 Settings> Select <Off> or <On> Restart the machine
<SNMPv3 Settings>
Enable or disable SNMPv3. Use the Remote UI to specify detailed settings that are applied when SNMPv3 is enabled.
<Off>
<On>
<Menu> <Preferences> <Network> <SNMP Settings> <SNMPv3 Settings> Select <Off> or <On> Restart the machine
<Acquire Printer Mngt. Info. from Host>
Enable or disable the monitoring of printer management information from a networked computer running SNMP-compatible software.
<Off>
<On>
<Menu> <Preferences> <Network> <SNMP Settings> <Acquire Printer Mngt. Info. from Host> Select <Off> or <On> Restart the machine
<Format Host Rsrcs. MIB to RFC2790>
Specify whether to conform to the advanced specifications (RFC2790) of the protocol when monitoring the machine status from the SNMP-compatible software.
<Off>
<On>
<Menu> <Preferences> <Network> <SNMP Settings> <Format Host Resources MIB to RFC2790> Select <Off> or <On> Restart the machine
<Dedicated Port Settings>
Enable or disable the dedicated port. The dedicated port is used when printing from the computer and when browsing or specifying the machine settings over the network.
<Off>
<On>
<Menu> <Preferences> <Network> <Dedicated Port Settings> Select <Off> or <On> Restart the machine
<Dedicated Port Authentication Method>
Specify whether to limit the authentication method specifically to the secure one when using the dedicated port. If <Mode 2> is selected, the authentication method is limited specifically to the secure one.
<Mode 1>
<Mode 2>
<Menu> <Preferences> <Network> <Dedicated Port Authentication Method> Select <Mode 1> or <Mode 2>
If <Mode 2> is selected, you cannot establish a connection from the device management software or driver in some cases.
Select the Ethernet type (10BASE-T/100BASE-TX/1000BASE-T) and the communication mode of Ethernet (half-duplex/full-duplex). You can also view the MAC address for wired LAN.
<Auto Detect>
Select whether to automatically detect or manually select the communication mode and the Ethernet type. Configuring Ethernet Settings
<Off>
<Communication Mode>
<Half Duplex>
<Full Duplex>
<Ethernet Type>
<10BASE-T>
<100BASE-TX>
<1000BASE-T>
<On>
When <Communication Mode> is set to <Half Duplex>, you cannot select <1000BASE-T>.
<Menu> <Preferences> <Network> <IEEE 802.1X Settings> Select <Off> or <On> Restart the machine
<Firewall Settings>
Without proper security, unauthorized third parties can access computers and other communication devices that are connected to a network. To prevent this unauthorized access, specify the settings for packet filter, a feature that restricts communication to devices with specified IP addresses or MAC addresses.
<Menu> <Preferences> <Network> <Firewall Settings> <MAC Address Filter> Select <Outbound Filter> or <Inbound Filter> Select <Off> or <On> Restart the machine
<Device Settings Management On/Off>
Specify whether to use imageWARE Enterprise Management Console plug-ins to manage machine data such as settings. For detailed information on imageWARE Enterprise Management Console, contact your dealer or service representative. Configuring Settings for Communication between the Machine and Plug-ins
<Off>
<On>
<Monitoring Service> *1
Enable communication with a remote monitoring server. Execution of this item enables information about the machine to be periodically sent to the remote monitoring server connected to the machine.
This site uses cookies to provide its contents and functions and improve their qualities etc. You can find out more about our use of the cookies here. If you select "Reject", only cookies necessary to provide the contents and functions of the site are recorded and stored.