<Network Settings>

22EJ-09F
All the settings related to the network are listed with descriptions. Default settings are marked with a dagger ().
<Select Wired/Wireless LAN>
<Wireless LAN Settings>
<Direct Connection Settings>
<Easy Connection via PC>
<TCP/IP Settings>
<SNMP Settings>
<Dedicated Port Settings>
<Waiting Time for Connection at Startup>
<Ethernet Driver Settings>
<IEEE 802.1X Settings>
<Initialize Network Settings>
Asterisks (*)
Settings marked with an asterisk (*) may not be displayed depending on the model you are using or other setting items.

<Select Wired/Wireless LAN>

When switching the machine from Wireless LAN to Wired LAN, you need to specify the setting. Conversely, when switching the machine from Wired LAN to Wireless LAN, you do not need to specify this setting (You can switch using the following <Wireless LAN Settings>). Selecting Wired LAN or Wireless LAN
<Wired LAN>
<Wireless LAN>

<Wireless LAN Settings>

Specify settings for connecting the machine to a wireless LAN. You can also view the current settings or specify the setting for saving power consumption.
<SSID Settings>
Select to configure a wireless connection by specifying information including an SSID or a network key by inputting manually from the operation panel.
<Select Access Point>
Wireless LAN routers that can access the machine are automatically located, so you can select from the list. You must manually enter a network key, such as a WEP key or a PSK. Setting Up Connection by Selecting a Wireless Router
<Enter Manually>
Select to configure a wireless connection by manually entering an SSID. By using this method, you can specify authentication and encryption settings in detail. Setting Up Connection by Specifying Detailed Settings
<Security Settings>
<None>
<WEP>
<Open System>
WEP Key 1 to 4
<Shared Key>
WEP Key 1 to 4
<WPA/WPA2-PSK>
<Auto>
<AES-CCMP>
<WPS Push Button Mode>
Select to automatically configure a wireless connection by using the button on a WPS wireless router. Setting Up Connection Using WPS Push Button Mode
<WPS PIN Code Mode>
Select to configure a wireless connection by entering a PIN code for a WPS wireless router. Setting Up Connection Using WPS PIN Code Mode
<Power Save Mode>
Select whether or not the machine enters Power Save Mode based on signals emitted from the wireless router.
<Off>
<On>
<Wireless LAN Information>
Select to view the current wireless LAN settings. Viewing Network Settings
<MAC Address>
<Wireless LAN Status>
<Latest Error Information>
<Channel>
<SSID Settings>
<Security Settings>
<Power Save Mode>

<Direct Connection Settings>

Set whether to connect directly. By enabling this function, connecting directly with the machine is possible even in an environment without an access point or wireless LAN router. Connecting Directly (Access Point Mode)
<Use Direct Connection>
<Off>
<On>
<Direct Connection Only>*
<Wireless LAN/Direct Conn. (Auto Switch)>*
<Time Until Direct Connection Termination>
Specify the time to automatically disconnect after Direct Connection is established.
0 (Do not terminate session automatically)
1 to 10 to 60 (min.)
<Access Point Mode Settings>
Configure the SSID/network key arbitrarily. If you want to connect multiple mobile devices to the machine at the same time, you need to configure both SSID and network key arbitrarily.
<Use Custom SSID>
<Off>
<On>
<SSID>
 
<Use Custom Network Key>
<Off>
<On>
<Network Key>

<Easy Connection via PC>

Start Easy Connection via PC (cableless setup mode). This allows you to use Canon Laser NW Device Setup Utility on your PC to configure network settings.
"Canon Laser NW Device Setup Utility" is available on the Canon website (http://www.canon.com/).

<TCP/IP Settings>

Specify settings for using the machine in a TCP/IP network, such as IP address settings.
<IPv4 Settings>
Specify settings for using the machine in an IPv4 network.
<IP Address Settings>
Configure the IP address, which is used for identifying devices, such as computers and printers, on a TCP/IP network. Setting IPv4 Address
<Auto Acquire>
<Select Protocol>
<Off>
<DHCP>
<BOOTP>
<RARP>
<Auto IP>
<Off>
<On>
 
<Manually Acquire>
<IP Address>: 0.0.0.0
<Subnet Mask>: 0.0.0.0
<Gateway Address>: 0.0.0.0
 
<Check Settings>
<Auto Acquire>*
<IP Address>
<Subnet Mask>
<Gateway Address>
<PING Command>
Select to check that the machine is connected to a computer over a network. Testing the Network Connection
<DNS Settings>
Specify settings for Domain Name System (DNS), which provides a host name for IP address resolutions. Configuring DNS
<DNS Server Settings>
<Primary DNS Server>: 0.0.0.0
<Secondary DNS Server>: 0.0.0.0
 
<DNS Host Name/Domain Name Settings>
<Host Name>
<Domain Name>
 
<DNS Dynamic Update Settings>
<Off>
<On>
<DNS Dyn. Updt. Intrvl.>
0 to 24 to 48 (hr.)
<DHCP Option Settings>
If DHCP is enabled, use these settings to select whether to use the DHCP optional functions to acquire the host name and to use the dynamic update function. Configuring DNS
<Acquire Host Name>
<Off>
<On>
 
<DNS Dynamic Update>
<Off>
<On>
<IPv6 Settings>
Specify settings for using the machine in an IPv6 network.
<Use IPv6>
Enable or disable IPv6 in the machine. You can also view the current settings. Setting IPv6 Addresses
<Off>
 
<On>
 
<Check Settings>
<Link-Local Address>
<Prefix Length>
<Stateless Address Settings>
Enable or disable stateless addresses. Setting IPv6 Addresses
<Off>
 
<On>
 
<Check Settings>
<Stateless Address>
<Prefix Length>
<Use DHCPv6>
Enable or disable the stateful address that is acquired via DHCPv6. Setting IPv6 Addresses
<Off>
 
<On>
 
<Check Settings>
<Stateful Address>
<Prefix Length>
<DNS Settings>
Specify settings for Domain Name System (DNS), which provides a host name for IP address resolutions. Configuring DNS
<DNS Host Name/Domain Name Settings>
<Use IPv4 Host/Domain>
<Off>
<Host Name>
<Domain Name>
<On>
 
<DNS Dynamic Update Settings>
<Off>
<On>
<Register Manual Address>
<Off>
<On>
<Register Stateful Address>
<Off>
<On>
<Register Stateless Address>
<Off>
<On>
<DNS Dynamic Update Interval>
0 to 24 to 48 (hr.)
<LPD Print Settings>
Enable or disable LPD, a printing protocol that can be used on any hardware platform or operating system. Configuring Printing Protocols and WSD Functions
<Off>
<On>
<RAW Print Settings>
Enable or disable RAW, a Windows specific printing protocol. Configuring Printing Protocols and WSD Functions
<Off>
<On>
<WSD Settings>
Enable or disable automatic browsing and acquiring information for the printer or scanner by using the WSD protocol. Configuring Printing Protocols and WSD Functions
<WSD Print Settings>
<Use WSD Print>
<Off>
<On>
<Use WSD Browsing>
<Off>
<On>
 
<WSD Scan Settings>
<Use WSD Scan>
<Off>
<On>
<Use Computer Scan>
<Off>
<On>
 
<Use Multicast Discovery>
<Off>
<On>
<Use HTTP>
Enable or disable HTTP, which is required for communications with a computer, such as when using the Remote UI, WSD printing, or printing with Google Cloud Print. Disabling HTTP Communication
<Off>
<On>
<Port Number Settings>
Change port numbers for protocols according to the network environment. Changing Port Numbers
<LPD>
1 to 515 to 65535
 
<RAW>
1 to 9100 to 65535
 
<WSD Multicast Discovery>
1 to 3702 to 65535
 
<HTTP>
1 to 80 to 65535
 
<SNMP>
1 to 161 to 65535
<MTU Size>
Select the maximum size of packets the machine receives. Changing the Maximum Transmission Unit
<1300>
<1400>
<1500>

<SNMP Settings>

Specify the settings for monitoring and controlling the machine from a computer running SNMP-compatible software. Monitoring and Controlling the Machine with SNMP
<SNMPv1 Settings>
Enable or disable SNMPv1. When enabling SNMPv1, specify a community name and access privileges to Management Information Base (MIB) objects.
<Off>
<On>
<SNMPv3 Settings>
Enable or disable SNMPv3. Use the Remote UI to specify detailed settings that are applied when SNMPv3 is enabled.
<Off>
<On>
<Acquire Printer Mngt. Info. from Host>
Enable or disable the monitoring of printer management information from a networked computer running SNMP-compatible software.
<Off>
<On>

<Dedicated Port Settings>

Enable or disable the dedicated port. The dedicated port is used when printing or scanning uses MF Scan Utility and when browsing or specifying the machine settings over the network.
<Off>
<On>

<Waiting Time for Connection at Startup>

Specify a wait time for connecting to a network. Select the setting depending on the network environment. Setting a Wait Time for Connecting to a Network
0 to 300 (sec.)

<Ethernet Driver Settings>

Select the Ethernet type (10BASE-T/100BASE-TX) and the communication mode of Ethernet (half-duplex/full-duplex). You can also view the MAC address for wired LAN.
<Auto Detect>
Select whether to automatically detect or manually select the communication mode and the Ethernet type. Configuring Ethernet Settings
<Off>
<Communication Mode>
<Half Duplex>
<Full Duplex>
<Ethernet Type>
<10BASE-T>
<100BASE-TX>

<On>
<MAC Address>
Check the MAC address of the machine, which is a number unique to each communication device. Viewing the MAC Address for Wired LAN

<IEEE 802.1X Settings>

Enable or disable IEEE 802.1X authentication. Configuring IEEE 802.1X Authentication Settings
<Off>
<On>

<Initialize Network Settings>

Select to return the Network Settings to the factory defaults. <Initialize Menu>

Find manuals for other products
imageCLASS MF113w
User's Guide (Product Manual)
USRMA-3129-012019-12Copyright CANON INC. 2019