Function Settings

Function Settings: Common

Item	Setting Description	Default Setting	Can be set in Remote UI	Device Information Delivery Available
[Paper Feed Settings]
[Paper Drawer Auto Selection On/Off] (See "Enabling Paper Drawer Auto Selection.")	Copy, Printer, Access Stored Files, Receive 2/Fax1, Other	-	Yes	No
	MP Tray: On, Off	Off	Yes	No
	Other: On, Off	On	Yes	No
	Copy: Consider Paper Type: On, Off	On	Yes	No
[Feed Method Switch] (See "Matching the Print Side for 1-Sided and 2-Sided Printing.")	MP Tray, Other: Speed Priority, Print Side Priority	Speed Priority	Yes	No
[Suspended Job Timeout] (See "Enabling Timeout for Suspended Jobs.")	On, Off	Off	Yes	Yes
	0 to 999 minutes	5 mins	Yes	Yes
[Paper Output Settings]
[Output Tray Settings]*1 (See "Output Tray Designation.")	Tray A: Copy, Access Stored Files, Printer, Receive2, Other, Fax11 Tray B: Copy, Access Stored Files, Printer, Receive2, Other, Fax11 Tray C: Copy, Access Stored Files, Printer, Receive2, Other, Fax11 The Output Tray Settings are displayed in the following cases: If the Inner 2 Way Tray-F1 and Copy Tray-J1 are attached: If the Inner Finisher-C1, Inner Finisher Additional Tray-A1, and Copy Tray-J1 are attached: Tray Home Position: Tray A, Tray B, Off	If the Tray C is not attached: Tray A: Copy, Access Stored Files Tray B: Printer, Receive, Fax, Other If the Inner Finisher-C1 and Copy Tray-J1 are attached: Tray A: Copy, Access Stored Files, Printer Tray B: Receive, Fax, Other If the Tray C is attached: Tray A: Copy, Access Stored Files Tray B: Printer Tray C: Receive, Fax, Other Tray Home Position: Tray A	Yes	No*3
[Offset Jobs]*1 (See "Alternating the Print Output (Offset Jobs).")	On, Off	On	Yes	Yes
[Job Separator Between Jobs] (See "Inserting a Job Separation Sheet between Print Jobs.")	On, Off	Off	Yes	Yes
	Change (Select Paper)	-	Yes	Yes
[Job Separator Between Copies] (See "Inserting a Job Separation Sheet between Copy Sets.")	On, Off	Off	Yes	No
	Copies (1 to 9999)	10	Yes	No
	Change (Select Paper)	-	Yes	No
[Print Settings]
[Print Priority] (See "Setting the Printing Priority.")	Copy: 1, 2, 3	1	Yes	Yes
	Printer: 1, 2, 3	2	Yes	Yes
	Access Strd Files, Receive2/ Fax1, Other: 1, 2, 3	3	Yes	Yes
[Text/Photo Priority When ACS Is Set to Black] (See "Text/Photo Priority in a Black-and-White Original.")	Text Priority, Photo Priority	Text Priority	Yes	Yes
[Output Report Default Settings] (See "Outputting Reports with Two-Sided Printing.")	2-Sided Printing: On, Off	Off	Yes	Yes
[Register Characters for Page No./Watermark] (See "Registering/Editing/Deleting User-Defined Text for Page Numbers and Watermarks.")	Register, Edit, Delete	-	Yes	Yes
[Copy Set Numbering Option Settings] (See "Copy Set Numbering Options.")	On, Off	Off	Yes	Yes
	Select Option ID/User Name: On, Off; Date: On, Off; Text: On, Off	Off	Yes	Yes
	Copy Set Numbering: Date Settings (mm/dd/yyyy, yyyy/mm/dd, dd/mm/yyyy, yyyy.mm.dd, mm.dd.yyyy, dd.mm.yyyy)	dd/mm/yyyy	Yes	Yes
	Set Characters	-	Yes	Yes
	Alignment Settings (Align Left, Align Center, Align Right)	Align Left	Yes	Yes
[Secure Watermark Settings] *1
[Forced Secure Watermark] (See "Specifying Secure Watermark.")	Copy, Access Stored Files, Printer: Set, Do Not Set	Do Not Set	Yes	Yes
	Select Type Watermark (COPY, INVALID, CONFIDENTIAL, FILE COPY, TOP SECRET, Custom)	CONFIDENTIAL	Yes	Yes
	Select Type Date: yyyy/mm/dd, mm/dd/yyyy, dd/mm/yyyy, yyyy.mm.dd, mm.dd.yyyy, dd.mm.yyyy	dd/mm/yyyy	Yes	Yes
	Select Type Copy Set Numbering: Starting Number (1 to 9999)	-	Yes	Yes
	Select Type Serial Number: display only	-	Yes	Yes
	Select Type ID/User Name: display only	-	Yes	Yes
	Set Details Background Pattern: None, Arabesque, Fans, Polka Dots, Stars, Mesh, Clouds, Cherry Blossoms, Leaves	None	Yes	Yes
	Set Details Color: Cyan, Magenta, Black	Black	Yes	Yes
	Set Details Size: 36.0 pt, 54.0 pt, 72.0 pt	54.0 pt	Yes	Yes
	Set Details Print Vertically: On, Off	Off	Yes	Yes
	Set Details White Letters on Colored Background: On, Off	Off	Yes	Yes
[Printer Driver Secure Watermark] (See "Printer Driver Secure Watermark.")	Set, Do Not Set	Do Not Set	Yes	Yes
	Select Type Watermark (COPY, INVALID, CONFIDENTIAL, FILE COPY, TOP SECRET, Custom)	CONFIDENTIAL	Yes	Yes
	Select Type Date: yyyy/mmdd, mm/dd/yyyy, dd/mm/yyyy, yyyy.mm.dd, mm.dd.yyyy, dd.mm.yyyy	dd/mm/yyyy	Yes	Yes
	Select Type Copy Set Numbering: Starting Number (1 to 9999)	-	Yes	Yes
	Select Type Serial Number: display only	-	Yes	Yes
	Select Type ID/User Name: display only	-	Yes	Yes
	Set Details Background Pattern: None, Arabesque, Fans, Polka Dots, Stars, Mesh, Clouds, Cherry Blossoms, Leaves	None	Yes	Yes
	Set Details Color: Cyan, Magenta, Black	Black	Yes	Yes
	Set Details Size: 36.0 pt, 54.0 pt, 72.0 pt	54.0 pt	Yes	Yes
	Set Details Print Vertically: On, Off	Off	Yes	Yes
	Set Details White Letters on Colored Background: On, Off	Off	Yes	Yes
[Adjust Background/Character Contrast] (See "Adjusting the Secure Watermark Contrast.")
[Standard]	Black, Cyan, Magenta	Black	No	No
	Relative Contrast (-7 to +7)	Black: -1 Cyan: 0 Magenta: 2	No	No
	Standard Value Set. (1 to 64)	Black: 12 Cyan: 16 Magenta: 8	No	No
	Latent Area Density (1 to 36)	Black: 6 Cyan: 9 Magenta: 7	No	No
	Print Settings Background Pattern: None, Arabesque, Fans, Polka Dots, Stars, Mesh, Clouds, Cherry Blossoms, Leaves	None	No	No
	Print Settings Size: 36.0 pt, 54.0 pt, 72.0 pt	54.0 pt	No	No
	Print Settings Print Vertically :On, Off	Off	No	No
	Print Settings White Letters on Colored Background: On, Off	Off	No	No
	Sample Print	-	No	No
	Initialize	-	No	No
[For Printer 1200 dpi]	Black, Cyan, Magenta	Black	No	No
	Relative Contrast (-7 to +7)	Black: 2 Cyan: 0 Magenta: 0	No	No
	Standard Value Set. (1 to 64)	Black: 12 Cyan: 20 Magenta: 16	No	No
	Latent Area Density (1 to 36)	Black: 6 Cyan: 9 Magenta: 9	No	No
	Print Settings Background Pattern: None, Arabesque, Fans, Polka Dots, Stars, Mesh, Clouds, Cherry Blossoms, Leaves	None	No	No
	Print Settings Size: 36.0 pt, 54.0 pt, 72.0 pt	54.0 pt	No	No
	Print Settings Print Vertically: On, Off	Off	No	No
	Print Settings White Letters on Colored Background: On, Off	Off	No	No
	Sample Print	-	No	No
	Initialize	-	No	No
[Scan Settings]
[LTRR/STMT Original Selection] (See "Distinguishing LTRR and STMT Originals.")	Select Manually, Use LTRR Format, Use STMT Format	Use LTRR Format	Yes	Yes
[Remote Scan Gamma Value] (See "Setting the Gamma Value for Remote Scans.")	Gamma 1.0, Gamma 1.4, Gamma 1.8, Gamma 2.2	Gamma 1.8	Yes	Yes
[Auto Online] (See "Automatically Enabling the Remote Scanner Function.")	On, Off	Off	No	Yes
[Auto Offline] (See "Auto Offline.")	On, Off	Off	No	Yes
[Generate File]
[High Compression Image Quality Level] (See "High Compression Image Quality Level.")	Image Level in Text/Photo Mode or Photo Mode: Data Size Priority, Normal, Quality Priority	Normal	Yes	Yes
	Image Level in Text Mode: Data Size Priority, Normal, Quality Priority	Normal	Yes	Yes
[OCR (Text Searchable) Settings]*1 (See "Settings for Creating Searchable PDF.")	Smart Scan: On, Off	On	Yes	Yes
	No. of OCR File Name Characters: 1 to 24 characters	24 Char	Yes	Yes
[Trace & Smooth Settings]*1 (See "Trace & Smooth Settings.")	Outline Graphics: On, Off	On	Yes	Yes
	Graphics Recognition Level: Normal, Moderate, High	Normal	Yes	Yes
	Background Image Level: Data Size Priority, Normal, Quality Priority	Normal	Yes	Yes
[Format PDF to PDF/A] (See "Format PDF as PDF/A.")	On, Off	Off	Yes	Yes
[Optimize PDF for Web]*2 (See "Optimize PDF for Web.")	On, Off	Off	Yes	Yes

*1	Indicates items that appear only when the appropriate optional equipment is available for use.
*2	If you are using the imageRUNNER ADVANCE C2020, depending on the region, these items appear only when the appropriate optional product is available for use.
*3	Sends if the number of output trays is the same for the machine that is sending device information and the device receiving the information.

Function Settings: Copy

Item	Setting Description	Default Setting	Can be set in Remote UI	Device Information Delivery Available
[Register/Edit Favorite Settings] (See "Registering/Editing/Deleting Favorite Settings Buttons.")	Register, Rename, Delete, Check Content (M1 to M9)	-	No	No
[Change Default Settings] (See "Changing/Initializing the Default Settings for the Copy Function.")	Register, Initialize	-	No	No
[Register Options Shortcuts] (See "Storing Shortcut Keys.")	Shortcut 1: Each mode, Unassigned	Finishing	No	No
	Shortcut 2: Each mode, Unassigned	2-Sided	No	No
	Shortcut 3: Each mode, Unassigned	Density	No	No
	Shortcut 4: Each mode, Unassigned	Original Type	No	No
	Shortcut 5: Each mode, Unassigned	Favorite Settings	No	No
[Auto Collate] (See "Enabling Auto Collating.")	On, Off	On	No	Yes
[Auto Orientation] (See "Enabling Auto Orientation.")	On, Off	On	No	Yes
[Select Color Settings for Copy]
[Use Auto (Color/Black)] (See "Restricting Use of Auto-Colour Select.")	On, Off	On	Yes	Yes
[Use Full Color] (See "Restricting the Use of Full Colour.")	On, Off	On	Yes	Yes

Function Settings: Printer

Item	Setting Description	Default Setting	Can be set in Remote UI	Device Information Delivery Available
[Output Report]
[PCL] *1
[Configuration Page]	Print	-	Yes	No
[Font List]	Print	-	Yes	No
[PS] *1
[Configuration Page]	Print	-	Yes	No
[Font List]	Print	-	Yes	No
[RGB Test Print]	Print	-	Yes	No
[CMYK Test Print]	Print	-	Yes	No
[RGB Color Chart]	Print	-	Yes	No
[CMYK Color Chart]	Print	-	Yes	No
[Printer Settings] (See "Setting the Machine (PS/PCL/UFR II Printer).")	[Custom Settings], [Utility]	-	Yes	Yes
[PDL Selection (Plug-n-Play)] (See "PDL Selection (Plug-n-play).")	UFR II, PCL5c1, PCL61, PS31, FAX 1, UFR II(XPS)	UFR II	Yes	No

*1	Indicates items that appear only when the appropriate optional equipment is available for use.

Function Settings: Send *2

Item	Setting Description	Default Setting	Can be set in Remote UI	Device Information Delivery Available
[Output Report]
[TX/RX User Data List] (See "Output Report.")	Print	-	Yes	No
[Fax User Data List]*1 (See "Output Report.")	Print	-	Yes	No
[Common Settings]
[Register Favorite Settings] (See "Registering/Editing/Deleting Favorite Settings Buttons.")	Confirm Settings, Select Location: M1 to M18	-	No	Yes
	Show Comment: On, Off	Off	No	Yes
	Name, Comment	-	No	Yes
[Edit Favorite Settings](See "Registering/Editing/Deleting Favorite Settings Buttons.")	Delete, Check Content, Rename (Name, Comment): M1 to M18	-	No	Yes
	Show Comment: On, Off	Off	No	Yes
[Display Confirmation for Favorite Settings] (See "Displaying a Confirmation Screen when Recalling Favorite Settings.")	On, Off	On	No	No
[Default Screen] (See "Changing the Default Screen for Send.")	Standard, One-Touch, Favorite Settings, Address Book	Standard	No	No
[Change Default Settings] (See "Changing the Default Settings for Send.")	Register, Initialize	-	No	No
[Register Options Shortcuts] (See "Storing Shortcut Keys.")	Shortcut 1: Each mode, Unassigned	2-Sided Original	No	No
	Shortcut 2: Each mode, Unassigned	Different Size Originals	No	No
[TX Report] (See "Send TX Report.")	For Error Only, On, Off	For Error Only	Yes	Yes
	Report with TX Image: On, Off	On	Yes	Yes
[Communication Management Report] (See "Communication Management Report.")	Auto Print (100 Transmissions): On, Off	On	Yes	Yes
	Specify Print Time: On, Off	Off	Yes	Yes
	Timer Setting: 00:00 to 23:59	00:00	Yes	Yes
	Send/Receive Separate: On, Off	Off	Yes	Yes
[TX Terminal ID] (See "Printing the TX Terminal ID.")	Print, Do Not Print	Print	Yes	Yes
	Print Position: Inside, Outside	Outside	Yes	Yes
	Display Destination Unit Name: On, Off	On	Yes	Yes
	Telephone # Mark *1: Fax, TEL	Fax	Yes	Yes
[Delete Failed TX Jobs] (See "Automatically Deleting Failed Jobs.")	On, Off	On	Yes	Yes
[Retry Times] (See "Number of Retry Attempts.")	0 to 5 times	3 times	Yes	Yes
[Data Compression Ratio] (See "Data Compression Ratio.")	High Ratio, Normal, Low Ratio	Normal	Yes	Yes
[YCbCr TX Gamma Value] (See "Gamma Value for YCbCr Send Jobs.")	Gamma 1.0, Gamma 1.4, Gamma 1.8, Gamma 2.2	Gamma 1.8	Yes	Yes
[Use Divided Chunk Send for WebDav TX] (See "Dividing Data Into Chunks When Sending With WebDAV.")	On, Off	On	Yes	Yes
[Limit New Destination] (See "Restricting Sending to New Addresses.")	Fax*1: On, Off	Off	Yes	Yes
	E-Mail: On, Off	Off	Yes	Yes
	I-Fax: On, Off	Off	Yes	Yes
	File: On, Off	Off	Yes	Yes
[Always Add Device Signature to Send]*1 (See "Adding a Device Signature to Sent PDF or XPS Documents.")	On, Off	Off	Yes	Yes
	Restrict File Formats: On, Off	Off	Yes	Yes
[E-Mail/I-Fax Settings]
[Register Unit Name]	Unit Name	(NULL)	Yes	No
[Communication Settings] (See "Common Communication Settings for E-Mail/I-Fax.")
<Communication Settings: Basic Settings>	E-Mail Address	(NULL)	Yes	No
	SMTP server name or IP address	(NULL)	Yes	No
	Use POP RX: On, Off	On	Yes	Yes
	Use SMTP RX: On, Off	Off	Yes	Yes
<Communication Settings: POP Server Settings>	POP Server (Name or IP address)	(NULL)	Yes	No
	POP Address	(NULL)	Yes	No
	POP Password	(NULL)	Yes	No
	POP Interval: 0 to 99 (If the interval is set to '0', the incoming e-mail is not checked automatically.)	0 mins	Yes	No
<Communication Settings: Allow SSL>	SMTP TX: On, Off	Off	Yes	No
	SMTP RX: Always SSL, On, Off	Off	Yes	No
	POP: On, Off	Off	Yes	No
<Communication Settings: Authentication Settings>	POP AUTH Method: Standard/APOP/POP AUTH	Standard	Yes	Yes
	SMTP Authentication (SMTP AUTH): On, Off	Off	Yes	No
	User Name	(NULL)	Yes	No
	Password	(NULL)	Yes	No
	POP Authentication Before Send: On, Off	Off	Yes	No
	Display Auth. Screen When Send: On, Off	Off	Yes	No
[Maximum Data Size for Sending] (See "Maximum Data Size for Send.")	0 (Off), 1 to 99 MB	3MB	Yes	Yes
[Default Subject] (See "Default Subject.")	Default Subject	Attached Image	Yes	Yes
[Use SMTP Authentication for Each User] (See "Using SMTP Authentication for Each User.")	On, Off	On	Yes	No
[Specify Authentication User Dest. to Reply] (See "Setting an Authorized User E-Mail Address as the Reply-to Destination.")	On, Off	Off	Yes	No
[Set Authorized User Destination to Sender] (See "Setting an Authorized User E-Mail Address as the Sender.")	On, Off	On	Yes	No
[Allow Sending to Unregistered Destinations] (See "Allowing Users without Registered E-Mail Addresses to Send.")	On, Off	Off	Yes	Yes
[Full Mode TX Timeout] (See "Full Mode TX Timeout.")	1 to 99 hrs	24 hrs	Yes	Yes
[Print MDN/DSN upon Receipt] (See "Printing MDN/DSN upon Receipt.")	On, Off	Off	Yes	Yes
[Use Send via Server] (See "Use Send Via Server.")	On, Off	Off	Yes	Yes
[Allow MDN Not via Server] (See "Allow MDN Not Via Server.")	On, Off	On	Yes	Yes
[Restrict TX Destination Domain] (See "Restricting the Domains to Which E-mail/I-Fax Documents Can Be Sent.")	Restrict Sending to Domains; On, Off	Off	Yes	Yes
	Permitted Domains: Register, Details/Edit, Delete	-	Yes	Yes*8
	Domain Name Send to Subdomain: Allow, Reject	(NULL)	Yes	Yes
[Autocomplete for Entering E-mail Addresses] (See "Setting Autocomplete for E-mail Address Entry.")	On, Off	On	No	Yes
[Fax Settings] *1
[Default Screen] (See "Changing the Default Screen for Fax.")	Standard, One-Touch, Address Book	Standard	No	No
[Change Default Settings] (See "Changing the Default Settings for the Fax Function.")	Register, Initialize	-	No	No
[Register Options Shortcuts] (See "Storing Shortcut Keys.")	Shortcut 1: Each mode, Unassigned	Density	No	No
	Shortcut 2: Each mode, Unassigned	Original Type	No	No
	Shortcut 3: Each mode, Unassigned	2-Sided Original	No	No
	Shortcut 4: Each mode, Unassigned	Different Size Originals	No	No
[Register Sender Name (TTI)] (See "Registering/Editing/Deleting Sender Names.")	01 to 99: Register/Edit, Delete	-	Yes	No
[ECM TX] (See "Enabling ECM Transmission.")	On, Off	On	Yes	Yes
[Set Pause Time] *4(See "Pause Time.")	1 to 15 seconds	2 sec	Yes	Yes
[Auto Redial] (See "Enabling Auto Redial.")	On, Off	On	Yes	Yes
	Set Details: Redial Times *4 (1 to 10 times)	2 times	Yes	Yes
	Set Details: Redial Interval *4 (2 to 99 minutes)	2 mins	Yes	Yes
	Set Details: Redial When TX Error (Error and 1st Page, All Pages, Off)	Error and 1st Page	Yes	Yes
[Check Dial Tone Before Sending]*5 (See "Checking the Dial Tone before Sending.")	On, Off	Off	Yes	Yes
[Fax TX Report] (See "Fax TX Report.")	For Error Only, On, Off	For Error Only	Yes	Yes
	Report with TX Image: On, Off	On	Yes	Yes
[Fax Activity Report] (See "Fax Activity Report.")	Auto Print (40 Transmissions): On, Off	On	Yes	Yes
	Specify Print Time: On, Off	Off	Yes	Yes
	Timer Setting: 00:00 to 23:59	00:00	Yes	Yes
	Send/Receive Separate: On, Off	Off	Yes	Yes
[Set Line] (See "Fax Line Settings.")
[Line (1 to 2)]
	If the Super G3 FAX Board is installed: Line 1	-	Yes	No
	If the Super G3 FAX Board and Super G3 2nd Line Fax Board are installed: Line 2	-	Yes	No
[Register Unit telephone Number]	Unit telephone Number	(NULL)	Yes	No
[Register Unit Name]	Unit Name	(NULL)	Yes	No
[Select Line Type]*4	Pulse, Tone	Tone	Yes	No
[Select TX Line] (See "Setting the Line to Use when Sending.")	If the Super G3 FAX Board is installed: Line 1: Priority TX, Prohibit TX	Line 1: Priority TX	Yes	No
	If the Super G3 FAX Board and Super G3 2nd Line Fax Board are installed: Line 1: Priority TX, Prohibit TX Line 2: Priority TX, Prohibit TX	Line 1: Priority TX	Yes	No
[TX Start Speed] (See "Send Start Speed.")	33600 bps, 14400 bps, 9600 bps, 7200 bps, 4800 bps, 2400 bps	33600 bps	Yes	Yes
[R-Key Setting] (See "R-key Setting.")	PSTN, PBX	PSTN	Yes	Yes
	PBX: Prefix (20 digits maximum), Hooking	Prefix (NULL)	Yes	Yes
[Confirm Entered Fax Number] (See "Setting to Confirm Entered Fax Numbers.")	On, Off	Off	Yes	Yes
[Allow Fax Driver TX] (See "Allowing Sending from the Fax Driver.")	On, Off	On	Yes	Yes
[Remote Fax TX Settings]*1 (See "Remote Fax TX Settings.")
[Remote Fax Server Address]	Host name or the IP address (48 characters maximum)	(NULL)	Yes	No
[TX Timeout]	1 to 99 hrs	24 hrs	Yes	Yes
[No. of TX Lines]	1 to 4 lines	1	Yes	No
[Select Priority Line]	Auto, Line 1, Line 26, Line36, Line 4*6	Auto	Yes	No

*1	Indicates items that appear only when the appropriate optional equipment is available for use.
*2	If you are using the imageRUNNER ADVANCE C2020, depending on the region, these items appear only when the appropriate optional product is available for use.
*4	Indicates items with setting range and default setting that may differ, depending on the region.
*5	Indicates items that may not be displayed on the Settings/Registration screen or that may have different default setting, depending on the region.
*6	Displays according to the number of lines set in [No. of TX Lines].
*8	Indicates item that is not delivered as device information. Details/Edit, Delete

Function Settings: Receive/Forward *2

Item	Setting Description	Default Setting	Can be set in Remote UI	Device Information Delivery Available
[Output Report]
[TX/RX User Data List] (See "Output Report.")	Print	-	Yes	No
[Fax User Data List]*1 (See "Output Report.")	Print	-	Yes	No
[Common Settings]
[Print on Both Sides] (See "2-Sided Printing.")	On, Off	Off	Yes	Yes
[Select Drawer] (See "Paper Drawer Selection.")	Switch A: On, Off	On	Yes	Yes
	Switch B: On, Off	On	Yes	Yes
	Switch C: On, Off	On	Yes	Yes
	Switch D: On, Off	On	Yes	Yes
[Reduce Fax RX Size] (See "Reducing a Received Document.")	On, Off	On	Yes	Yes
	Reduction Mode: Auto, Fixed	Auto	Yes	Yes
	Reduction %: 75 to 97%	90%	Yes	Yes
	Reduction Direction: Vertical & Horizontal, Vertical Only	Vertical Only	Yes	Yes
[2 on 1 Log] (See "Printing Received Images with the 2 On 1 Layout.")	On, Off	Off	Yes	Yes
[Received Page Footer] (See "Printing Footer Information on a Received Document.")	Print, Do Not Print	Do Not Print	Yes	Yes
[Handle Files with Forwarding Errors] (See "Handling Files That Fail to Be Forwarded.")	Always Print, Store/Print, Off	Always Print	Yes	Yes
[Forwarding Settings] (See "Forwarding Settings.")	Receive Method, Validate/Invalidate, Delete, Register, Other Operations, (Forward w/o Conditions, Details/Edit, E-Mail Priority, Print List), Search	-	Yes	Yes*7
[Set Fax/I-Fax Inbox] (See "Specifying the Fax/I-Fax Inbox Settings.")
[Set/Register Confidential Fax Inboxes]	Box No.: 00 to 49	-	Yes	Yes
	Register Box Name	(NULL)	Yes	Yes
	PIN	(NULL)	Yes	Yes
	URL Send Settings	(NULL)	Yes	Yes
	Initialize	-	Yes	No
[Memory RX Inbox PIN]	Set: PIN, Confirm	(NULL)	Yes	No
[Use Fax Memory Lock]*1	On, Off	Off	Yes	Yes
[Use I-Fax Memory Lock]	On, Off	Off	Yes	Yes
[Memory Lock Start Time]	Everyday (1 to 5), Specify Days (Sun to Sat, 1 to 5), Off	Off	Yes	Yes
[Memory Lock End Time]	Everyday (1 to 5), Specify Days (Sun to Sat, 1 to 5), Off	Off	Yes	Yes
[Divided Data RX Timeout]	0 to 99 hrs	24 hrs	Yes	Yes
[Always Send Notice for RX Errors] (See "Always Send Notice for RX Errors.")	On, Off	On	Yes	Yes
[Fax Settings]*1
[ECM RX] (See "Enabling ECM Reception.")	On, Off	On	Yes	Yes
[Fax RX Report] (See "Fax RX Report.")	For Error Only, On, Off	Off	Yes	Yes
[Confidential Fax Inbox RX Report] (See "Confidential Fax Inbox RX Report.")	On, Off	On	Yes	Yes
[RX Start Speed] (See "Setting the Receive Start Speed.")	33600 bps, 14400 bps, 9600 bps, 7200 bps, 4800 bps, 2400 bps	33600 bps	Yes	Yes
[RX Password] (See "Setting the Receive Password.")	Set: Password, Confirm	(NULL)	Yes	No

*1	Indicates items that appear only when the appropriate optional equipment is available for use.
*2	If you are using the imageRUNNER ADVANCE C2020, depending on the region, these items appear only when the appropriate optional product is available for use.
*7	Indicates item that is not delivered as device information. Receive Type, Details/Edit, Delete, Print List, E-Mail Priority

Function Settings: Store/Access Files

Item	Setting Description	Default Setting	Can be set in Remote UI	Device Information Delivery Available
[Common Settings]
[Scan and Store Settings] (See "Specifying the Scan and Store Settings.")	Register/Edit Favorite Settings: Register, Rename, Delete, Check Content (M1 to M9)	-	No	No
	Change Default Settings: Register, Initialize	-	No	No
[Access Stored Files Settings] (See "Specifying the Stored File Settings.")	Register/Edit Favorite Settings: Register, Rename, Delete, Check Content (M1 to M9)	-	No	No
	Change Default Settings: Register, Initialize	-	No	No
[Network Settings] *2
[Network Place Settings] (See "Network Settings/Management when Using an Advanced Space.")	Register (Name, Location, Protocol), Details, Delete	-	Yes	No
[Protocol for External Reference] (See "Setting the Protocol for External Reference.")	SMB: On, Off	On	Yes	No
	WebDAV: On, Off	On	Yes	No

*2	If you are using the imageRUNNER ADVANCE C2020, depending on the region, these items appear only when the appropriate optional product is available for use.

Function Settings: Encrypted Secure Print *1

Item	Setting Description	Default Setting	Can be set in Remote UI	Device Information Delivery Available
[Only Allow Encrypted Print Jobs] (See "Accepting Only Encrypted Secured Printing.")	On, Off	Off	No	Yes

*1	Indicates items that appear only when the appropriate optional equipment is available for use.

NOTE
The names may be different on the Remote UI.