Feeder

This section describes the name and use of each part of the feeder.
The feeder is standard-equipped for the imageRUNNER 2425i.

Feeder cover

Open this cover when removing paper jammed in the feeder. Paper Jams in the Feeder

Original supply tray

Originals placed here are automatically fed into the feeder. When two or more sheets are loaded, originals can be scanned continuously. Placing Originals

Slide guides

Adjust these guides according to the width of an original.

Document feed scanning area

Originals placed in the feeder are scanned in this area.

Platen glass

When scanning books, thick originals, thin originals, and other originals that cannot be scanned using the feeder, place them on the platen glass. Placing Originals

Original output tray

Scanned originals are output here.
If a thick original such as a book or magazine is placed on the platen glass, do not press down hard on the feeder.
Do not place any objects in the original output area. Doing so may cause damage to the originals.
Regularly clean the feeder and platen glass in order to obtain proper print results. Regular Cleaning
6ECF-01F