Additional Copying Features (5 Lines LCD Model)

In addition to basic copy settings, the machine also has settings for 2-sided copying, image quality adjustment, and other settings according to your original and purpose. Use the copy screen to configure these settings.
* To make copies using the ID Card Copy function, you can simply adjust the density and image quality.
Making 2-sided Copies
Copying Multiple Originals onto One Sheet (N on 1)
Collating Copies by Page (Collate)
Adjusting the Density
Adjusting the Image Quality
Changing the Default Settings
You can also change the default copy settings. Changing the Default Settings
Basic Copy Operations
For the basic operations when copying, see the following:
Copy Operations

Making 2-sided Copies

You can copy two 1-sided originals on both sides of one sheet of paper.
* 2-sided copying may not be available with some sizes and types of paper. Usable Paper
1
Press [2-Sided] on the copy screen  .
The [2-Sided] screen reappears.
2
Press [1->2-Sided]  .
The copy screen reappears.
3
Set the original orientation and finishing Type, as needed.
1
Press [2-Sided] on the copy screen  .
The [2-Sided] screen is displayed.
2
Press [Original/Finishing Type]  .
The [Orig./Finishing Type] screen is displayed.
3
Select the orginal orientation  .
The [Finishing Type] screen is displayed.
4
Select the finishng type  .
The copy screen reappears.

Copying Multiple Originals onto One Sheet (N on 1)

You can reduce the size of a multiple-page original and arrange the pages on one sheet of paper when copying.
N on 1 is convenient when you want to save paper by copying on fewer sheets of paper than the original.
* This cannot be set at the same time as Erase Frame.
1
Press [N on 1] on the copy screen  .
The [N on 1] screen is displayed.
2
Select the number of pages to combined  .
[Off]
Pages are not combined.
[2 on 1]
Combines a 2-page original onto one sheet of paper.
[4 on 1]
Combines a 4-page original onto one sheet of paper.
3
Select the size of the placed original  .
The copy screen reappears.
4
Configure the layout (page order) when combining originals, as needed.
1
Press [N on 1]  
The [N on 1] screen is displayed.
2
Press [Select Layout]  .
The [Select Layout] screen is displayed.
3
Select the page order, and press .
The [Scan Size] screen is displayed.
4
Select the size of the placed original, and press .
The copy screen reappears.
When combining pages, the copy ratio is set automatically according to the following. You can also change the copy ratio setting manually.
Number of pages to be combined
Original size setting
Size of paper used for copying
When pages are combined, a margin may be created around the copied images.

Collating Copies by Page (Collate)

When copying multiple copies of a multi-page original, you can collate the copies in the page order of the original. This is convenient when copying handouts for meetings.
When Copying without Collating
The copies are grouped by the page of the original in the number of specified copies and not collated.
For example, when you are making three copies of a three-page original, the printouts are arranged in the following order: 1, 1, 1, 2, 2, 2, 3, 3, 3.
When Copying with Collating
The copies are collated into sets in the page order of the original.
For example, when you are making three copies of a three-page original, the printouts are arranged in the following order: 1, 2, 3, 1, 2, 3, 1, 2, 3.
 
1
Press [Collate] on the copy screen  .
The [Collate] screen is displayed.
2
Press [On]  .
The copy screen reappears.

Adjusting the Density

You can adjust the density to suit the original when copying.
If text or images in the original are too faint or dark, adjust the density of the entire original.
To create clean copies of an original with a colored background or a newspaper, adjust the density of the background.
1
Press [Density] on the copy screen  .
The [Density] screen is displayed.
2
Adjust the density.
Adjusting the Density of the Entire Original
Select [Density], move the slider to the left or right to adjust the density, and press .
Set [+] to increase the density and [-] to lower it.
Adjusting the Density of the Background
1
Press [Background]  .
The [Background] screen is displayed.
2
Select the adjustment method, and press .
[Auto]
An optimal density for the original is automatically set.
[Original Type] is automatically set to [Text].
[Adjust (Manual)]
Drag the slider to the left or right to adjust the density, and press .
Press [+] to increase the density and [-] to lower it.
When you adjust the density of the background, parts other than the background may also be affected.

Adjusting the Image Quality

You can adjust the image quality such as when the copied image is not clear or the text is difficult to read. You can also erase dark borders and shadows that appear around the edges of the original when copying.
* Erase Frame is not available when making copies using the ID Card Copy function.

Selecting the Image Quality for the Original Type

Erasing Dark Borders and Shadows around Edges of the Original (Erase Frame)

This function erases the dark borders and shadows that appear around the edges in the copied image when copying originals that are smaller than the paper size or thick originals.
* This cannot be set at the same time as N on 1.

Adjusting the Sharpness

You can emphasize the contours and lines to make them clearer in the copied image, or weaken them to make them softer.
95LS-05A