[Display Settings]

Configure the operation panel screen displays.
* Values in bold red text are the default settings for each item.

[Default Screen after Startup/Restoration]

[Menu]

[Preferences]

[Display Settings]

Specify the screen displayed after the start screen appears when the machine is turned ON and immediately after an Auto Reset.
Setting this for the [Status Monitor] enables you to also specify the screen displayed immediately after the [Status Monitor] screen is closed.

[Home]

[Copy]

[Fax]*1

[Scan]

[Status Monitor]

[Home]

[Copy]

[Fax]*1

[Scan]

*1 May not be displayed depending on the model, the installed options, and other settings.

[Button Display Order on Home Screen]

[Menu]

[Preferences]

[Display Settings]

Rearrange the buttons or change the display order of the items so that you can run frequently used functions more quickly from the [Home] screen of the operation panel.Customizing the [Home] Screen

Touch Panel Model

[Set Display Order]

[Insert and Delete Blank]

[Language]

[Menu]

[Preferences]

[Display Settings]

Change the language shown on the operation panel and used in printed reports.

* Depending on your country or region, the [Language] setting may not be available, or its content or default setting may be different.

[Bahasa Melayu]

[Deutsch]

[English]

[Español]

[Français]

[Italiano]

[Português]

[Tiếng Việt Nam]

[ภาษาไทย]

[日本語]

[中文(繁體)]

[中文(简体)]

[한국어]

[Remote UI Language]

[Menu]

[Preferences]

[Display Settings]

Change the language shown on Remote UI screens.

* Depending on your country or region, the [Remote UI Language] setting may not be available, or its content or default setting may be different.

[English]
[Japanese]
[French]
[Spanish]
[German]
[Italian]
[Portuguese]
[Chinese (Simplified)]
[Chinese (Traditional)]
[Korean]

[Millimeter/Inch Entry Switch]

[Menu]

[Preferences]

[Display Settings]

Change the units shown on the screen for entering length and width.

[Millimeter]

[Inch]

[Displ. Timing for Cartridge Prep. Notif.]

[Menu]

[Preferences]

[Display Settings]

When the toner in a toner cartridge runs low, a message appears notifying you to prepare a new toner cartridge. To manually specify when this message appears (the toner level in a cartridge), specify the timing in [Custom].
When [Auto] is enabled, the machine automatically decides when to display the message.

[Auto]

[Custom]

20 to 99 (%) (Touch Panel Model)

2 to 20 to 99 (%) (5 Lines LCD Model)

[Show Warnings]

[Menu]

[Preferences]

[Display Settings]

Specify whether a notification message is displayed when a toner cartridge is low on toner.

* If the machine is configured to stop printing when a toner cartridge is low on toner, this cannot be set to [Off]. [Action When Warning]

* If the machine is configured not to print incoming faxes when a toner cartridge is low on toner, the message appears even when this is set to [Off]. [Continue Print. When Amount in Cart. Low]

[Low Cartridge Level]

[Off]

[On]

[Action When Warning]

[Menu]

[Preferences]

[Display Settings]

Specify whether to continue printing when a toner cartridge is low on toner.
If this is set to [Stop Printing], a notification message appears when the toner cartridge runs low on toner. [Show Warnings]

[Low Cartridge Level]

[Continue Printing]

[Stop Printing]

[Display IP Address]

[Menu]

[Preferences]

[Display Settings]

Specify whether to display the machine’s IPv4 address in the [Status Monitor] screen. [Status Monitor] Screen

[Off]

[On]

[Notify to Clean Original Scanning Area] *1

[Menu]

[Preferences]

[Display Settings]

Specify whether a message is displayed to notify you if soiling is detected during feeder use.

[Off]
[On]

*1 May not be displayed depending on the model, the installed options, and other settings.