Adjustment/Maintenance

19Y4-05U
 
All the settings about adjustment and maintenance are listed with short descriptions. Default settings are marked with a dagger ().
Displ. Timing for Cartridge Prep. Notif.
Toner Save
Special Processing
Clean Fixing Assembly

Displ. Timing for Cartridge Prep. Notif.

Set the display timing for the message notifying you that the amount remaining in the toner cartridges is low.
1 to 10 to 99 (%)

Toner Save

Select whether to reduce toner consumption when copying.
Copy
Off
On
When set to <On>
Fine lines and portions with lighter print density may become blurred.

Special Processing

If the print results on special types of paper are not satisfactory, the following settings may improve the quality of the printouts.
Special Printing Mode U
If toner appears splattered around text and patterns in a printout, select <On>.
Off
On
When set to <On>
Print quality can be affected by the type of paper (especially lightweight paper) and the printing environment (especially high humidity).
Special Printing Mode V
Adjust this setting if the print paper curls or wrinkles.
Off
Mode 1
Mode 2
Mode 3
To enable the setting
This setting is enabled in the following conditions.
The paper size is set to <B5>, <A5>, <STMT>, or <EXEC>
<Paper Type> is set to <Plain (16 lb Bond-23 lb Bond)>, <Plain L (16 lb Bond-23 lb Bond)>, <Recycled (16 lb Bond-23 lb Bond)>, <Color (16 lb Bond-23 lb Bond)>, or <Envelope>
After the setting is enabled
Print speed is slower.
Special Printing Mode X
Adjust this setting if streaks adhere to the print paper.
Off
Mode 1
Mode 2
Mode 3
Mode 4
Special Printing Mode Z
Adjust this setting if streaks adhere to the print paper output when copying.
Off
Mode 1
Mode 2
Mode 3
Mode 4
After the setting is changed
By specifying <Off> or <Mode 1>, streaks may adhere to the print paper. By specifying <Mode 3> or <Mode 4>, outlines may be blurred or images may appear somewhat grainy. The print density becomes lighter as the setting progresses from <Off> to <Mode 4>.
After printing from a smartphone or tablet
If streaks adhere to the paper, change the setting with <Special Printing Mode Z>.
Special Printing Mode B
Adjust this setting if streaks adhere to the print paper after replacing the toner cartridge or after not printing for a long period of time.
Off
Mode 1
Mode 2
Mode 3
After the setting is enabled
Print speed is slower.
Special Printing Mode C
Adjust this setting if streaks adhere to the print paper.
Off
On
After the setting is enabled
While more effect is gained than with <Special Printing Mode Z>, print speed is slower.
Special Printing Mode D
Adjust this setting if streaks adhere to the print paper. Also, setting this item to <On> will reduce the operating noise during printing.
Copy
Off
On
 
Print
Off
On
After the setting is enabled
While more effect is gained than with <Special Printing Mode Z>, print speed is slower.
After printing from a smartphone or tablet
If streaks adhere to the paper, change the setting with <Special Printing Mode D>  <Copy>.
Special Printing Mode I
Only select <On> if paper jams frequently when printing on lightweight paper or on curled paper.
Off
On
When set to <On>
White patches may appear in images printed on paper other than lightweight paper.
Special Printing Mode J
If printing is uneven when printing fine lines or faint images, select <On>.
Off
On
When set to <On>.
The following may occur.
Definition may be affected
Toner appears in non-print areas when using a new toner cartridge
Toner cartridge may be used up more quickly
Special Printing Mode K
If toner does not adhere adequately and printouts are faded, select <On>.
Off
On
When set to <On>
Print speed is slower.

Clean Fixing Assembly

Clean the fixing assembly after a toner cartridge is replaced or if black streaks appear on printouts. Fixing Assembly

Find manuals for other products
imageCLASS D570
User's Guide (Product Manual)
USRMA-1576-012019-10Copyright CANON INC. 2019