[Status Monitor] Screen

This screen is displayed when you press

on the control panel.
Use this screen to check the information of the machine, usage and logs, network settings, and error information.

[IPv4] (imageRUNNER 2224N only)
Displays the IPv4 address of the machine by default. You can also hide this. [Display IP Address]

[Error Information/Notification] (imageRUNNER 2224N only)
You can check the information of errors that occur on the machine. Take troubleshooting measures according to the error details.
A Message Appears
An Error Code Is Displayed

[Device Status]

[Paper Information]
Check the remaining amount of paper for each paper source.

[Toner Level]
You can check the remaining amount in the toner cartridge.
Other internal parts may reach the end of their lifetime before the toner runs out.

[Secure Print Memory Usage] (imageRUNNER 2224N only)
Check to see how much memory is used by the Secure Print data temporarily saved to the memory of the machine.

[Version Information]
Displays the firmware version information of the machine.

[Serial Number]
Displays the serial number of the machine.

[Copy/Print Job]
Displays the copy or print processing status and log.
Checking the Copy Status and Log
Viewing the Print Job Status and Log

[TX Job] (imageRUNNER 2224N only)
Displays the status and log of sent and saved scanned data.
Checking the Send and Save Status and Log of Scanned Data

[Network Information] (imageRUNNER 2224N only)

[IPv4]
Check the IPv4 address and other settings. Setting IPv4 Addresses

[IPv6]
Check the IPv6 address and other settings. Setting IPv6 Addresses

[Network Connection Method]
Check whether the machine has a wired or wireless connection.
Displays the connection status and error information when connected by wireless LAN.

[Direct Connection Information]
Displays the connection status when directly connected to a device.

[IEEE 802.1X Error Information]
Displays the details of errors that occur with IEEE 802.1X authentication.