Orientation for Loading Paper with a Logo

For the general procedure of loading paper, see the following: Loading Paper in the Paper Drawer Loading Paper in the Multi-purpose Tray You can configure the settings so that the orientation the paper is to be loaded and the side to print on do not change depending on whether you want to print on one or both sides. When this setting is configured, load the paper using the 2-sided printing method. [Switch Paper Feed Method]

Orientation of the original when copying

When performing a copy operation, pay attention to the orientation of the original to be placed.
Place the original in the feeder with the side to copy face up or on the platen glass with the side to copy face down, as shown in the figure below.

For A4 or A5 portrait layout originals

	Feeder		Platen glass

For A3 portrait layout originals

	Feeder		Platen glass

For A4 or A5 landscape layout originals

	Feeder		Platen glass

For A3 landscape layout originals

	Feeder		Platen glass

Loading Paper with Logos in Portrait Orientation

When Loading A4-, A5-size Paper with Logos

	Paper drawer		Multi-purpose tray

	Paper drawer		Multi-purpose tray

	Paper drawer		Multi-purpose tray

When Loading A3-size Paper with Logos

Paper drawer		Multi-purpose tray

Loading Paper with Logos in Landscape Orientation

When Loading A4-, A5-size Paper with Logos

Paper drawer		Multi-purpose tray

When Loading A3-size Paper with Logos

	Paper drawer		Multi-purpose tray

	Paper drawer		Multi-purpose tray