Changing the Report and List Print Settings

Reports and lists are printed on paper on one side by default. You can change the setting to print on both sides. You can also change the setting to automatically print communication results reports.

Use the control panel to configure the settings. You cannot configure the settings using Remote UI from a computer.

On the control panel, press [Menu] in the [Home] screen. [Home] Screen

Press [Output Rprt.]

[Report Settings].

The [Report Settings] screen is displayed.

Change the report and list print settings.

To Print Reports and Lists on Both Sides

1	Press [Default Settings for Report Output] [2-Sided Printing]. The [2-Sided Printing] screen is displayed.
2	Press [On].

To Change the Communication Management Report Settings

1	Press [Communication Management Report]. The [Comm. Mngt. Report] screen is displayed.
2	Configure the report settings. To print automatically after every 40 communication events, press [Auto Print (40 Transmissions)] [On]. To configure the settings to print sending and saving results and receiving results in a different format, press [Separate TX/RX] [On].

To Change the E-mail or File Sending Result Report Settings

1	Press [E-Mail/File TX Result Report]. The [E-Mail/File TX Report] screen is displayed.
2	Select whether to print this report automatically. To print automatically after each send or save job, select [On]. To print automatically only when an error occurs, select [Only When Error Occurs].