Preparing to Save Scanned Data to a USB Memory Device
This enables saving of scanned data to a USB memory device.
This section describes how to configure the settings using Remote UI from a computer.
On the control panel, select [Menu] in the [Home] screen, and then select [Function Settings] to configure the settings.
[Memory Media Settings]Administrator privileges are required. The machine must be restarted to apply the settings.
1
Log in to Remote UI in System Manager Mode.
Starting Remote UI2
On the Portal page of Remote UI, click [Settings/Registration].
Portal Page of Remote UI3
Click [Store/Access Files Settings]
[Memory Media Settings]
[Edit].
The [Edit Memory Media Settings] screen is displayed.
4
Select the [Store to Memory Media] checkbox, and click [OK].
5
The settings are applied.
|
Selecting an Operation When a USB Memory Device Is ConnectedYou can configure the settings to display a screen for selecting and immediately executing an operation (scanning from a USB memory device or Memory Media Print) when a USB memory device is inserted into the machine. Log in to Remote UI in System Manager Mode [Settings/Registration] [Store/Access Files Settings] [Edit] of [Display Screen When Memory Media is Connected] select the [Display Screen When Memory Media is Connected] checkbox [OK] |
Using the control panel, configure the settings in the [Home] screen from [Menu] [Function Settings]. [Screen When Mem. Med. Conn] |