[Display Settings]
Configure the control panel screen displays.
* Values in bold red text are the default settings for each item.
[Default Screen After Startup/Restoration]
[Menu]
[Preferences]
[Display Settings]
Specify the screen displayed after the start screen appears when the machine is turned ON and immediately after an Auto Reset.
Setting this for the [Status Monitor] enables you to also specify the screen displayed immediately after the [Status Monitor] screen is closed.
[Home] [Copy] [Fax] [Scan] [Secure Print] [Status Monitor] [Home] [Copy] [Fax] [Scan] [Secure Print] |
[Home Screen Button Display Settings]
[Menu]
[Preferences]
[Display Settings]
Add shortcut buttons and rearrange the buttons so that you can run frequently used functions more quickly from the [Home] screen of the control panel.
Customizing the [Home] Screen[Select Button to Display] [Favorite Copy Settings] [Favorite Fax Settings] [Favorite Scan Settings] [Set Display Order] |
[Language]
[Menu]
[Preferences]
[Display Settings]
Change the language shown on the control panel and used in printed reports.
* Depending on your country or region, the [Language] setting may not be available, or its content or default setting may be different.
[Deutsch] [English] [Español] [Français] [Italiano] [Português] [日本語] [中文(繁體)] [中文(简体)] [한국어] |
[Remote UI Language]
[Menu]
[Preferences]
[Display Settings]
Change the language shown on Remote UI screens.
* Depending on your country or region, the [Remote UI Language] setting may not be available, or its content or default setting may be different.
[English] [Japanese] [French] [Spanish] [German] [Italian] [Portuguese] [Chinese (Simplified)] [Chinese (Traditional)] [Korean] |
[Notify to Clean Orig. Scan Area]
[Menu]
[Preferences]
[Display Settings]
Specify whether a message is displayed to notify you if soiling is detected during feeder use.
[Millimeter/Inch Entry Switch]
[Menu]
[Preferences]
[Display Settings]
Change the units shown on the screen for entering length and width.
[Gram/Pound Switch]
[Menu]
[Preferences]
[Display Settings]
You can change the units displayed such as for the paper weight.
* [Gram/Pound Switch] is only displayed when [Select Country/Region] is set to [United States (US)] or [Canada (CA)].
[Display Timing for Cart. Prep.]
[Menu]
[Preferences]
[Display Settings]
When the toner in a toner cartridge runs low, a message appears notifying you to prepare a new toner cartridge. To manually specify when this message appears (the toner level in a cartridge), set [Auto] to [Off] and specify the timing in [Custom].
When [Auto] is set to [On], the machine automatically decides when to display the message.
[Auto] [Off] [Custom] 2 to 20 to 99 (%) [On] |
[Display Notif. to Clean Fixing Assembly]
[Menu]
[Preferences]
[Display Settings]
Select whether to notify you by displaying a message when the fixing assembly requires cleaning.
[Off] [On] [1000 to 50000] |
[Show Warnings]
[Menu]
[Preferences]
[Display Settings]
Specify whether a notification message is displayed when a toner cartridge is low on toner.
* If the machine is configured to stop printing when a toner cartridge is low on toner, this cannot be set to [Off].
[Action When Warning]* If the machine is configured not to print incoming faxes and I-Faxes when a toner cartridge is low on toner, the message appears even when this is set to [Off].
[Continue Print. When Cart. Low][Action When Warning]
[Menu]
[Preferences]
[Display Settings]
Specify whether to continue printing when a toner cartridge is low on toner.
If this is set to [Stop Printing], a notification message appears when the toner cartridge runs low on toner.
[Show Warnings][Low Cartridge Level] [Continue Printing] [Stop Printing] |
[Display IP Address]
[Menu]
[Preferences]
[Display Settings]