Usable Paper
The sizes and types of paper that can be used on the machine are shown below.
|
Precautions must be taken when handling and storing paper. Precautions When Handling Paper |
Usable Paper Sizes
: Usable 
: Not usablePaper Sizes | Paper Source | |
Drawer 1 | Drawer 2 | |
A4 | | |
A4R | | |
A3 | | |
A5R | | |
B4 | | |
B5R | | |
8K | | |
16KR | | |
LTR | | |
LTRR | | |
LGL | | |
STMTR | | |
11x17 | | |
FOOLSCAP/FOLIO | | |
OFICIO | | |
LETTER (Government) | | |
LETTERR (Government) | | |
LETTER (Argentina) | | |
LETTERR (Argentina) | | |
LEGAL (Government) | | |
LEGAL (India) | | |
FOOLSCAP (Australia) | | |
OFICIO (Brazil) | | |
OFICIO (Mexico) | | |
OFICIO (Ecuador) | | |
OFICIO (Argentina) | | |
F4A | | |
Custom Size (139.7 mm x 210 mm to 297 mm x 431.8 mm) | | |
 | ||||||||
Paper sizes supported by this machine  The following table shows most of the sizes of paper that can be used with the machine.  Other supported paper sizes are as follows. 11" x 17" (279.4 mm x 431.8 mm) FOOLSCAP/FOLIO (215.9 mm x 330.2 mm) OFICIO (215.9 mm x 317.5 mm) LETTER (Government) (203.2 mm x 266.7 mm) LETTER (Argentina) (220.0 mm x 280.0 mm) LEGAL (Government) (203.2 mm x 330.2 mm) LEGAL (India) (215.0 mm x 345.0 mm) FOOLSCAP (Australia) (206.0 mm x 337.0 mm) OFICIO (Brazil) (216.0 mm x 355.0 mm) OFICIO (Mexico) (216.0 mm x 341.0 mm) OFICIO (Ecuador) (220.0 mm x 320.0 mm) OFICIO (Argentina) (220.0 mm x 340.0 mm) F4A (215.9 mm x 342.9 mm) "Vertical" side and "Horizontal" side of paper In the User's Guide, regardless of the paper orientation, the side of paper perpendicular (  ) to the front of the machine is referred to as the "vertical" side while the side parallel ( ) to the front of the machine is referred to as the "horizontal" side. In the User's Guide, loading paper with the longer side perpendicular to the front of the machine is referred to as placing in "portrait orientation" while loading paper with the longer side horizontal to the front of the machine is referred to as placing in "landscape orientation."
"A4R," "A5R," "B5R," "LTRR," and "STMTR" refer to A4 / A5 / B5 / LTR / STMT size paper placed in landscape orientation, respectively. |
Usable Paper Types
You can use non-chlorine paper.
: Usable : Not usablePaper Type | Paper Weight | Paper Source | |
Drawer 1 | Drawer 2 | ||
Plain 1 | 64 g/m² to 75 g/m² | | |
Plain 2 | 76 g/m² to 90 g/m² | | |
Recycled 1* | 64 g/m² to 75 g/m² | | |
Recycled 2* | 76 g/m² to 90 g/m² | | |
Color | 64 g/m² to 82 g/m² | | |
Pre-Punched 1 | 64 g/m² to 75 g/m² | | |
Pre-Punched 2 | 76 g/m² to 90 g/m² | | |
Letterhead 1 | 64 g/m² to 75 g/m² | | |
Letterhead 2 | 76 g/m² to 90 g/m² | | |
*You can use 100% recycled paper.
Paper Available for Two-Sided Copying/Two-Sided Printing
When performing 2-sided copying or 2-sided printing, use paper that meets the following requirements.
Paper size: | A4, A4R, A3, A5R, B4, B5R, 16KR, 8K, LTR, LTRR, LGL, STMTR, 11x17, FOOLSCAP/FOLIO, OFICIO, LETTER (Government), LETTERR (Government), LETTER (Argentina), LETTERR (Argentina), LEGAL (Government), LEGAL (India), FOOLSCAP (Australia), OFICIO (Brazil), OFICIO (Mexico), OFICIO (Ecuador), OFICIO (Argentina), F4A, Custom Size (139.7 mm x 210 mm to 297 mm x 431.8 mm) |
Paper type: | Plain 1 to Plain 2, Color, Recycled 1, Recycled 2, Pre-Punched 1, Pre-Punched 2, Letterhead 1, and Letterhead 2 |
Paper weight: | 64 g/m² to 90 g/m² |
If using other paper, use [Manual Back Side Print (2-Sided Only)] to copy/print on the back side of printed paper.
Unusable Paper
Before printing, check whether the paper to use is suitable. Do not use the following types of paper, as they can cause paper jams or printing errors: Wrinkled, creased, curled, torn, or damp paper*1 Thin straw paper, very thin paper, coarse paper, glossy paper Paper with glue or other adhesive sticking out or label paper whose back side can be easily peeled off Paper printed by a thermal transfer printer, back side of paper printed by a thermal transfer printer |
*1 Printing on damp paper may cause steam to be emitted from the output area or water droplets to adhere to the output part, but this does not indicate a malfunction. This is because the water contained in the paper evaporates due to the heat generated when the toner fixes to the paper. This is more likely to occur when the room temperature is low.